Guitto GGP-05 Acoustic Guitar Multifunctional Vibration Pickup
Owner's Manual
Thank you for purchasing this product!
The Guitto GGP-05 is an acoustic guitar multifunctional vibration pickup designed for live streaming. It features digital effects, a drum machine, live streaming capabilities, a tuner, and vibration speakers. It offers effects like REVERB and CHORUS, along with a drum machine for unplugged playing. The GGP-05 also enables live streaming and online teaching, with a dedicated MIC Input Jack for voice explanations and an internal Mic suitable for percussive guitar playing.
I. Features:
- Suitable for 36-42 inch classical and acoustic guitars.
- Vibration speaker effects mode: adds effects to your guitar when playing unplugged.
- MIC Input Jack: for live streaming and voice explanation during teaching.
- OTG audio interface function: for recording and live streaming.
- Various RHYTHMS: with multiple music genres.
- Internal Mic: for percussive guitar playing.
II. Safety Instructions:
- If not in use for a long time, remove the battery and store it in the packing box or a dry container to prevent moisture.
- Store batteries in dry and cool places. Do not store batteries with metals to avoid leakage, short circuits, or battery leakage.
- This product is a precision electronic device. Do not open its case for any reason. Doing so may void the factory warranty.
- This product contains a lithium battery. For your safety, do not attempt to replace the lithium battery yourself.
- Do not replace this product's pickup with one from other brands.
This product uses a lithium battery. Ensure the polarity matches the markings on the product when installing the battery.
III. Package Contents:
- The unit
- Plastic panel
- Knob
- Tail nail's connecting cable
- Vibration amp
- Wire clip (2PCS)
- Owner's manual
- 18650 lithium battery (3.7V 2900mAh)
- Type-C cable (x1)
- M2 x 8 black screws (5PCS)
- Piezoelectric pickup
- Transparent PVC sheet
- Paperboard
- Headphones with MIC
IV. IR Pickup's Functions:
Control Panel Description:
- 1. VOCAL MIC: 3.5mm voice MIC Input Jack, for connecting to the attached headset.
- 2. Type-C port: for charging, OTG recording & live streaming.
- 3. MIC VOL.: Adjusts the volume of the MIC percussive guitar in the main interface. (Refer to chapter 6 for details.)
- 4. DRUM VOL.: Adjusts the volume of the Drum machine in the main interface. (Refer to chapter 6 for details.)
- 5. MASTER: Adjusts the Master Volume or turns the unit on/off.
- 6. LCD display: Displays features and related information.
- 7. GUITAR VOL.: Adjusts the guitar volume in the main interface. (Refer to chapter 6 for details.)
- 8. SPEAKER Out: Connects to a speaker with vibration effects.
- 9. LINE OUT: Connects to a 6.35 mm socket.
- 10. Pickup Input Jack: Connects to the pickup.
- 11. 18650 lithium battery compartment: Houses the rechargeable battery.
V. How to Assemble the Pickup:
- Drill square holes on the side of the acoustic guitar as shown in the diagram (dimensions: 55.40mm x 41.40mm).
- Assemble the components as follows:
- A. Assemble the pickup: Insert the piezoelectric pickup into the designated slot.
- B. Assemble the tail nail's connecting cable: Connect the cable to the tail nail.
- C. Assemble the vibration amp: Position the vibration amp in the lower right corner of the guitar cavity, with the lead wire facing upwards and the speaker facing the guitar's side.
- D. Install the battery: Ensure correct polarity before inserting the 18650 lithium battery into the compartment.
- E. Connect the internal wires: Plug the pickup, tail nail connecting cable, and vibration speaker into their respective jacks on the unit.
- F. Assemble the unit and panel: Place the unit inside the guitar cavity, aligning the display screen with the pre-drilled holes. Secure the panel from the outside using the provided screws.
- G. Assemble the knobs and PVC sheets: Place the transparent PVC sheets onto the control knob shafts and then attach the knobs.
VI. Quick Tour:
The unit features several control knobs and an LCD display for managing various functions:
- Main Interface Controls:
- G.MIC (MIC VOL. knob): Controls the volume of the percussive guitar microphone. This function works only in LINE OUT mode.
- DRUM (DRUM VOL. knob): Controls the drum machine volume.
- PIEZO (GUITAR VOL. knob): Controls the guitar volume.
- MST (MASTER knob): Controls the master volume and can be used to turn the unit on/off.
- Tuner Mode: Tap the MIC VOL. knob from the main interface to enter the tuner mode. Tap the MASTER knob to exit. The tuner displays 'TUNER' and 'A=440Hz'.
- Voice MIC Control Interface: Long press the MIC VOL. knob to access controls for the voice microphone, including Volume (VOL.), Treble (TRE.), Bass (BASS), and Reverb (REV.). These are adjusted using the MIC VOL., DRUM VOL., GUITAR VOL., and MASTER knobs respectively. Tap the MASTER knob to exit.
- Bluetooth Interface: Tap the MASTER knob from the main interface to enter/exit the Bluetooth settings. The MASTER knob can be used to turn Bluetooth on or off.
- Drum Machine Interface: Tap the DRUM VOL. knob to enter the drum machine interface. Here you can adjust drum volume (MIC VOL. knob), select rhythm patterns (DRUM VOL. knob), and adjust tempo (GUITAR VOL. knob). Tap the MASTER knob to exit. The display shows rhythm number and BPM.
- Guitar Effects Control Interface: Tap the GUITAR VOL. knob to access guitar effects controls, including Tone (TONE), Chorus (CHOR.), and Reverb (REV.). These are adjusted using the MIC VOL., DRUM VOL., and GUITAR VOL. knobs respectively. Tap the MASTER knob to exit.
Battery Indicator: The battery symbol on the LCD display indicates the remaining battery life. When the symbol turns red, it signifies that the unit needs charging. When charging, the battery symbol will show a lightning bolt. A fully charged battery is indicated by a green lightning bolt symbol.
VII. About Charging:
- Charge the GGP-05 using the attached USB cable and a 5V power adapter (e.g., a mobile phone charger).
- Note: The power adapter's rated output current should be greater than 1A.
- Note: Only use the attached lithium battery. Do not use other batteries.
VIII. Troubleshooting and Maintenance:
- LCD display is off when the unit is turned on:
- Check if the unit is fully charged.
- Verify that the battery polarity is correctly connected.
- Issues with the 1st or 6th string while playing:
- Check the installation position of the pickup and adjust if necessary.
- Strange sound from the guitar's cavity:
- Ensure the vibration speaker is not obstructed by any foreign objects.
- Check if the connecting cable is loose and secure it with the wire clip if needed.
IX. Parameters:
- Maximum power consumption: 3W
- Charging time: 3-4 hours
- Speaker specifications: 2 inches
- Maximum power: 2W
- Speaker Impedance: 8Ω
- Dimensions: 95 x 70 x 55 mm
- Weight: 137g
JOYO TECHNOLOGY CO., LTD
Address: 2/F, Lushi Industry Building, 28th District, Bao'an, Shenzhen, 518133 China.
Tel: 0086-755-29765381
Email: service@guittochina.com
FCC Warning:
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Caution: Any changes or modifications to this device not explicitly approved by the manufacturer could void your authority to operate this equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. The device has been evaluated to meet general RF exposure requirement.
Guitto Product Service Policy
I. Warranty Service: In case of non-human-induced performance failures during normal product use, consumers are entitled to warranty service for 12 months from the date of purchase.
II. Warranty Exclusions: Consumers cannot enjoy warranty benefits under the following circumstances:
- Human-induced damage.
- Exceeding the warranty period.
- Absence of a warranty card and valid invoice, unless proof of purchase within the warranty period is provided.
- Warranty card does not match the product model, or the warranty card has been altered.
- Product damage caused by failure to use, maintain, or service the product according to the manual.
- Unauthorized disassembly or repair of the product by the user, or damage due to water immersion or drops.
- Damage caused by force majeure events.
III. Guitto Service Information:
- Consumer Service Hotline: 0755-29765390
- After-sales Service Email: service@guilttochina.com
- For more information, please visit: www.guilttochina.com
Guitto Product Warranty Card
Product Model | SN Number | ||
---|---|---|---|
User Information | Name | Purchase Date | |
Phone | |||
Address | |||
Invoice Number | |||
Sales Unit Information | Name (with official seal) | ||
Address | |||
Phone |
Product Qualification Certificate
Product Qualification Certificate | |
---|---|
Inspection Conclusion | Qualified |
Inspection Quality Number | QC 01 |
Date |
Manufacturer Information:
Brand: Guitto
Product Name: Pickup
Executive Standard: GB/T 30414-2013
Manufacturer: Shenzhen Zhuole Technology Co., Ltd.
Address: 2nd Floor, Lushi Industry Building, District 28, Xin'an Third Road, Bao'an, Shenzhen, Guangdong Province, 518133 China
After-sales Service Hotline: 0755-29765390
Official WeChat: [WeChat logo]
After-sales Service Official Account: [WeChat QR Code]