DreamSky DS226 FM-AM Radio with Bluetooth

Introduction

Thank you for purchasing the DreamSky FM-AM Radio with Bluetooth. To ensure the best product performance, please read this user manual in detail and retain it for future reference.

Questions? Contact Customer Service Center at: ? info@dreamsky4u.com

Overview

The DreamSky DS226 is a versatile radio featuring FM, AM, and Bluetooth connectivity. It is powered by AC or C batteries.

Key Components:

• 1. /SLEEP Button: Press to turn on the radio; press to select sleep timer; hold to turn off the radio.
• 2. Power/Sleep Timer Indicator: Indicates power status and sleep timer activation.
• 3. TUNING Knob: Used to change the radio station.
• 4. VOLUME Knob: Used to adjust the volume.
• 5. FM/AM/Bluetooth Switch: Toggles between Bluetooth, FM, and AM bands.
• 6. Earphone Jack: For connecting headphones.
• 7. AC 7.5V INPUT: Socket for the AC power adapter.
• 8. Antenna: Telescopic antenna for FM reception and built-in ferrite antenna for AM reception.
• 9. Battery Compartment: Located at the rear, holds 4 'C' batteries.

Diagram Description: The front panel features a speaker grille, tuning knob, volume knob, and control buttons. The side panel shows the telescopic antenna and earphone jack. The rear panel includes the AC input and battery compartment. The top panel has the main controls.

Safety Precautions

• Remove batteries if the unit is not used for a long time or only powered by AC to avoid leakage.
• Do not expose the unit to rain, moisture, dripping, splashing, or heat sources.
• DO NOT dispose of batteries in fire, as they may explode or leak.
• DO NOT mix old and new batteries or different types of batteries (alkaline/standard).
• DO NOT use rechargeable batteries.
• DO NOT recharge non-rechargeable batteries.
• DO NOT short-circuit the supply terminals.
• DO NOT use a battery if its cover is peeled off.
• Do not place objects filled with liquids, such as vases, on this unit.
• Do not attempt to repair this unit yourself; refer servicing to qualified personnel.
• DO NOT heat or expose to flame.
• Avoid cuts, scratches, or poor connections in the AC adapter cord.
• Avoid excessive bending, pulling, or splicing of the cord.
• Do not unplug the AC adapter by pulling on the cord.
• Do not operate this unit on AC power in a bathroom.
• Do not leave the battery in a car exposed to direct sunlight for a long period with doors and windows closed.

Specifications

• Radio Frequency Range:
  • FM: 87.0 MHz - 108.0 MHz
  • AM: 520 KHz - 1710 KHz
• Power Source:
  • AC: 7.5V/0.2A, 60Hz (Requires 110V voltage)
  • DC: C Alkaline Batteries * 4 (Not included)
• Dimensions (L x W x H): 8.6" x 2.4" x 4.9"

Power Supply

Using Dry Cell Batteries (Alkaline Batteries)

1. Unplug the AC power supply cord from the household AC outlet and the AC INPUT socket on the unit.
2. Open the battery compartment cover.
3. Insert 4 'C' batteries into the battery compartment, following the polarity (+/-) diagram inside.

Diagram Description: The battery compartment shows the correct placement for four 'C' batteries, indicating positive (+) and negative (-) terminals.

Connecting AC Power Supply Cord

Use the included AC power supply cord (7.5V/0.2A, 110V voltage applicable). The included AC power supply cord is for use with this unit only. Do not use it with other equipment.

Operation

Tune in Radio

1. Press the / SLEEP button to turn on the radio.
2. Toggle the switch to select the AM or FM band.
3. Rotate the TUNING knob to select the desired radio channel. The frequency display shows the selected frequency.
4. Rotate the VOLUME knob to adjust the volume.

Diagram Description: The frequency dial shows markings for FM (e.g., 98, 100, 102 MHz) and AM (e.g., 70, 80, 100, 120 KHz). The volume knob is also depicted.

Bluetooth Mode

1. Press the / SLEEP button to turn on the device and toggle the switch to Bluetooth mode.
2. Turn on your audio source's Bluetooth and select "DS226" from the Bluetooth menu.
3. Rotate the VOLUME knob or adjust your audio source's volume for a proper sound.

Diagram Description: A list of available Bluetooth devices shows "DS226".

Note: To connect with a new device, you may need to disconnect the last connected device if it is nearby.

Sleep Timer

With the sleep timer, the device will turn off automatically after a specified time interval.

1. Press the / SLEEP button to activate the sleep countdown timer when the device is ON.
2. Press the / SLEEP button repeatedly to cycle through the available durations: 30 Minutes, 1 Hour, 2 Hours, or Endless (continuous playback).

Diagram Description: Shows the /SLEEP button and a sleep timer indicator.

Turn OFF the Radio

Hold the / SLEEP button to turn off the radio.

Adjust the Antenna

• FM: Pull out the telescopic antenna and adjust its length and angle for optimum reception.
• AM: The unit is equipped with a built-in ferrite antenna. Try various directions for optimum reception.

Diagram Description: Depicts the telescopic antenna being extended.

Earphone Jack

Plug in your earphone to listen to the radio privately. Note: Earphones are not provided.

Diagram Description: Shows the earphone jack port.

Troubleshooting

Q: No power

A:

• Batteries may be dead or incorrectly inserted.
• AC power connection might be loose.
• The power outlet may not be working.

Q: No sound

A:

• Volume of the device or the Bluetooth source may not be adjusted.
• Headphones might be connected to the unit.

Q: Poor radio reception

A:

• The radio signal may be weak. Extend, incline, and rotate the telescopic antenna for the best reception.

FCC Statement

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Caution: Any changes or modifications to this device not explicitly approved by the manufacturer could void your authority to operate this equipment.

FCC Radiation Exposure Statement:

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. In order to avoid the possibility of exceeding the FCC radio frequency exposure limits, human proximity to the antenna shall not be less than 0cm during normal operation.

After Sales Service

If you encounter problems when using this DreamSky FM-AM Radio with Bluetooth, please contact us by email: ? info@dreamsky4u.com

Our Warranty

• 90-day money back guarantee
• 365-day free replacement

Battery Disposal

PLEASE DISPOSE OF OLD OR DEFECTIVE BATTERIES IN AN ENVIRONMENTALLY SAFE WAY AND IN ACCORDANCE WITH YOUR LOCAL LAWS AND REGULATIONS.