C14/C20 EZ-Lok Plug Connector

The ATEN 2X-EA10 (C14) and 2X-EA11 (C20) EZ-Lok Plug Connectors are designed to secure power cords to a PDU's C14 or C20 outlet, preventing accidental disconnection of power.

Package Contents:

• 2X-EA10 - 10 x C14 EZ-Lok Plug Connectors
• or
• 2X-EA11 - 10 x C20 EZ-Lok Plug Connectors

Installation

To use the EZ-Lok Plug Connector:

1. Slide the plug connector onto the input end of a C14 or C20 plug until it clicks in place.

   Visual: On the left, a C14 plug connector is shown with a black arrow pointing towards a C14 socket. On the right, a C20 plug connector is shown with a black arrow pointing towards a C20 socket, illustrating the insertion action.

2. Connect the plug with the EZ-Lok Connector into the PDU by sliding it directly over and straight into the outlet.

   Visual: A C14 plug connector is depicted being inserted into a C14 outlet on a PDU panel, which displays the ATEN logo. A black arrow indicates the insertion direction. Similarly, a C20 plug connector is shown being inserted into a C20 outlet on a PDU, also displaying the ATEN logo and an insertion arrow.

3. To disconnect the plug from the PDU, grip the plug and squeeze the EZ-Lok tab as you pull the cord from the outlet.

   Visual: A C14 plug connector is shown being pulled away from a C14 outlet on a PDU, with a black arrow indicating the removal direction. The action implies squeezing the EZ-Lok tab. A C20 plug connector is depicted being disconnected from a C20 outlet on a PDU, with a similar removal arrow.