Mobili Fiver IACOPO and EASY 36 Furniture Series
This document provides assembly instructions, care guidelines, warranty information, and product details for the Mobili Fiver IACOPO and EASY 36 furniture series.
General Information & Safety
Important: Please read these instructions carefully before assembly and installation. Failure to comply can lead to serious risks of personal injury, damage to the product, and property. Mobili Fiver is not responsible for damage due to incorrect fixing, anchoring, or assembly.
Warnings:
- The product must be assembled and installed by adults. ?
- Keep all hardware parts and packaging out of the reach of children. Do not let children play with the product.
- Choose a clean, flat, and spacious area for assembly. Avoid hard surfaces that could damage the product; use a carpet for protection.
- Wear safety goggles ? and work gloves ? during assembly to avoid accidents.
- Lubricated components (e.g., guides) may stain.
- To prevent the risk of falling, this product must be fixed to a solid wall (capable of supporting its weight) with a suitable support (supplied in the hardware kit). If you lack experience, seek qualified personnel for wall fixing. ?
Care and Maintenance:
- Keep the product away from direct heat and sunlight. Prolonged exposure can cause color fading.
- Clean regularly with a soft cloth (to avoid scratches) and non-aggressive detergents. Furniture polishes are not necessary.
- Avoid solvents, abrasive products, and aggressive chemical detergents, as they can damage the finish.
- Do not leave water deposits on the furniture. Remove liquid traces immediately by dabbing with a soft, clean cloth to prevent damage to the finish.
- Periodically check that all structural and fixing components are intact and in good working order.
Precautions:
- The intended use is stated on the Mobili Fiver website.
- For its intended use, the product is not toxic or harmful to humans or the environment.
- Mobili Fiver is not liable for damages to people, animals, or things resulting from unauthorized modifications.
- Unless otherwise specified, the product is for internal use ONLY. Avoid improper or incorrect use.
Warranty:
This product is covered by consumer goods warranty (Directive EU 2019/771) against conformity defects within 24 months from delivery. The warranty covers replacement of defective products or parts, provided the product is used according to instructions and product sheets on www.mobilifiver.com.
What is NOT covered by the warranty:
- Assembly with missing or damaged hardware/components.
- Incorrect or partial assembly not following instructions.
- Accidental damage, normal wear and tear, discoloration due to light, flooding, excessive heat, misuse, or improper maintenance.
- Unauthorized modifications to the product.
The warranty is void if the product is arbitrarily modified. Proper assembly is crucial to avoid damage and injury risks.
To make a warranty claim: Contact Mobili Fiver via www.mobilifiver.com for detailed procedures and conditions. Mobili Fiver will assess the issue and, at its discretion, provide a replacement or alternative compensation if the problem is covered.
For further details, visit: www.mobilifiver.com/eu/en/warranty-terms
Product Models & Components
The IACOPO and EASY series offer modular units. The following table outlines some key models and their component requirements.
IACOPO Series Models
| Model | Component A | Component B | Component F | Component G | Component DA | Component DB | Component DC |
|---|---|---|---|---|---|---|---|
| IACOPO36 | 1 | 1 | - | - | 1 | - | - |
| IACOPO70 | 1 | - | 1 | - | - | 1 | - |
| IACOPO104 | 1 | - | - | 1 | - | - | 1 |
EASY Series Models
| Model | Component A | Component B | Component C | Component D |
|---|---|---|---|---|
| X36 | 1 | 1 | - | - |
| EASY36 | 1 | 1 | 1 | - |
| IACOPO36 (as per diagram) | 1 | 1 | - | 1 |
Hardware Kits
Various hardware kits are provided for assembly. Quantities and contents are detailed below.
Kit B (for EASY/X36 models)
- Screws (A3): n. 8
- Dowels (S1): n. 8
- T11 (Label/sticker): n. 1
- Wall Plug (R1): n. 4
- Screws (V14): n. 4
- Screws (V18): n. 6
- Cam Locks (X12): n. 4
- Cam Dowels (X1): n. 8
- Plastic Caps (X7): n. 4
- Hinges (E1): n. 8
Kit T41 & T43 (for wall mounting)
- T41 (Bracket): n. 2
- T43 (Mounting Plate): n. 1
Kit P (for IACOPO models - DA, DB)
- Screws (V2): n. 10
- Hinges (T55): n. 2
- Hinge Supports (T10): n. 2
- Hinge Base (T1): n. 1
Kit Q (for IACOPO models - DC)
- Screws (V2): n. 14
- Hinges (T55): n. 3
- Hinge Supports (T10): n. 3
- Hinge Base (T1): n. 1
Assembly Instructions
Estimated assembly time for EASY/X36 models: ⏰ 20 MIN. Estimated assembly time for IACOPO models: ⏰ 15 MIN.
Step 1: Prepare Panels
EASY/X36 Models: Insert dowels (S1) into designated holes on panels. Attach cam lock housings (E1) to other panels using screws.
IACOPO Models: Attach hinge bases (T10) to panels using screws (V2) and hinge bases (T1). Ensure correct orientation. Use screws (V18) and (V2) as indicated.
Step 2: Assemble Frame
EASY/X36 Models: Connect side panels to the base panel using cam locks (X12) and cam dowels (X1). Insert screws (A3) into the top panel.
IACOPO Models: Connect panels using screws (V2) and cam dowels (X1). Ensure correct alignment.
Step 3: Attach Back Panel
Slide the back panel into the grooves of the assembled frame. Secure if necessary.
Step 4: Attach Top Panel
EASY/X36 Models: Place the top panel onto the assembled unit and secure it using screws (V14) or cam locks, as per the diagram.
IACOPO Models: Attach the top panel using screws (V2) and cam dowels (X1).
Step 5: Install Hinges
EASY/X36 Models: Attach hinges (E1) to the side panels. Ensure they are correctly positioned.
IACOPO Models: Attach hinges (T55) to the doors/panels using screws (V2). Then attach the hinge supports (T10) to the main unit.
Step 6: Attach Doors/Drawers
EASY/X36 Models: Mount the doors onto the hinges.
IACOPO Models: Connect the doors to the hinge supports. Adjust hinges for proper alignment and closure. The diagrams show how to attach the door to the unit and adjust the hinges.
Step 7: Add Shelves/Internal Components
Insert shelves or other internal components as per the diagrams. Use shelf pins or other provided hardware.
Step 8: Final Touches
Insert plastic caps (X7) to cover screw holes. Apply labels (T11) if applicable.
Step 9: Wall Mounting (Optional but Recommended)
⚠️ Warning: For safety, secure the unit to the wall using the provided wall plugs (R1) and screws (V14) or mounting brackets (T41, T43). Ensure the wall is suitable for mounting.
The diagrams show how to mark the wall, drill holes, insert wall plugs, and attach the unit using brackets.
Step 10: Final Check & Weight Limits
Ensure all connections are secure. Check the product's stability.
Weight Limits:
- IACOPO models: Max load 40 KG ⚖️
- EASY models: Max load 30 KG ⚖️
The final assembled products are shown, sparkling ✨, indicating completion.
Mobili Fiver products are Made in Italy ?? and Recycled ♻️.
