Introduction
This document provides step-by-step instructions for assembling the Noblechairs LEGEND gaming chair. Please ensure all parts are present before beginning assembly.
Recommended: Two people for assembly. ?
Parts List
- Screws & Tools:
- 2x M5 (16mm) screws
- 4x M8 (20mm) screws
- 1x Allen key ⚙️
- Chair Components:
- 1x Lumbar support pillow
- 1x Headrest pillow
- 1x Seat base
- 1x Backrest
- 1x 5-star base
- 1x Gas lift
- 1x Gas lift cover
- 1x Left armrest
- 1x Right armrest
- 1x Mechanism
- 1x Gas lift cylinder
- 2x Armrest screws
- 1x Base plate
- 2x Backrest screws
Assembly Steps
Step 1: Attach Mechanism to Seat Base
Align the mechanism with the pre-drilled holes on the underside of the seat base. Secure it using four (4) M8 (20mm) screws. Ensure all screws are tightened properly. ✔️
Step 2: Attach Armrests to Seat Base
Attach the left and right armrests to the sides of the seat base. Use the provided screws (typically M8, check parts list for exact count and type). Ensure they are securely fastened. ✔️
Step 3: Assemble the Base
Insert the five (5) casters into the sockets at the end of each leg of the 5-star base. Push firmly until they click into place. ➡️
Step 4: Install Gas Lift
Place the gas lift cylinder into the center hole of the 5-star base. Slide the gas lift cover over the gas lift cylinder. ⬆️
Step 5: Mount Seat Assembly
Carefully lift the assembled seat (with mechanism and armrests attached) and place it onto the gas lift cylinder. Ensure it is centered and seated correctly. ⬇️
Step 6: Attach Backrest to Seat
Align the backrest with the mounting points on the seat base/mechanism. Secure the backrest using the appropriate screws (refer to diagrams for specific screw types and quantities, likely M8). ⚠️ Ensure correct alignment before tightening. ✔️
Step 7: Attach Headrest
Attach the headrest pillow to the top of the backrest. Use two (2) M5 (16mm) screws to secure it in place. ✔️
Step 8: Final Assembly Check
Review all connections to ensure they are secure. The chair is now assembled. ✔️
Step 9: Armrest Attachment (Detail)
Attach the armrests to the main chair body (seat and backrest assembly). Ensure proper alignment and secure with screws. ➡️
Step 10: Backrest Securing (Detail)
Confirm the backrest is firmly attached to the seat mechanism using the specified screws. ⚙️
Step 11: Headrest Attachment (Detail)
Ensure the headrest is securely fastened to the backrest. ✔️
Step 12: Final Chair View
The Noblechairs LEGEND gaming chair is now fully assembled and ready for use.
Chair Adjustments
Height Adjustment
To adjust the seat height, lift the lever located under the seat. For raising, lift the lever while unweighted. For lowering, lift the lever while seated. ⬆️⬇️
Tilt and Recline
The chair features a tilt mechanism. Use the lever(s) to adjust the recline angle and lock the tilt position. The diagrams indicate how to adjust tilt tension using a knob, possibly with weight applied to the seat. ⚙️⚖️
Tilt Lock: Use the designated lever to lock or unlock the tilt function. ??
Ergonomic Posture
The chair is designed for ergonomic support. Illustrations show correct sitting posture with the back straight and feet flat on the floor. ?
Usage Icons:
- ✔️ Correct posture/usage
- ❌ Incorrect posture/usage
Contact & Support
For further assistance or inquiries, please visit:
Email: info@noblechairs.com
Manufacturer: Pro Gamersware GmbH, c/o noblechairs, Gaußstraße 1, 10589 Berlin.
Document Date: 2022-07
