Table of Contents
- Wear Parts
- Service Parts
- Brushes / Pad Driver and Pads, 50 CM / 20 IN DISK
- Battery and Charger Group
- Main Frame Group
- Electrical Group
- Control Panel Group
- Wheel Assembly
- Motor Assembly
- Solution Tank Group
- Scrub Head Group
- Hose Group
- Recovery Tank Group
- Squeegee Adjustment Group
- Squeegee Lift Group
- Squeegee Assembly, 50 CM / 20 IN
Wear Parts
This section lists recommended wear parts for the Tennant T260 floor scrubber.
| Ref. | Part No. | Mfr. Date | Description | Qty. |
|---|---|---|---|---|
| 9015731 | Blade Kit, 500mm, Linatex (Standard) | 1 | ||
| 1203953 | Blade, Sqge, Rear, 836l, Linatex[500mm] (Standard) | 1 | ||
| 1203954 | Blade, Sqge, Front, 788l, Linatex[500mm] (Standard) | 1 | ||
| 9015732 | Blade Kit, 500mm, Urethane (Optional) | 1 | ||
| 1215609 | Blade, Sqge, Rear, 836l, Urethane[500mm] (Optional) | 1 | ||
| 1215611 | Blade, Sqge, Front, 788l, Urethane[500mm] (Optional) | 1 | ||
| 9015730 | Blade Kit, 500mm, Gum (Optional) | 1 | ||
| 1215610 | Blade, Sqge, Rear, 836l, Gum[500mm] (Optional) | 1 | ||
| 1215612 | Blade, Sqge, Front, 788l, Gum[500mm] (Optional) | 1 | ||
| CN5006244 | Brush Assy, Disc, Scb, 50cm | 1 | ||
| CN5006245 | Driver Assy, Pad, 50cm, 3 Lug | 1 | ||
| 1243338 | Pad, Polish, 20.0d, White [1pick=1ctn] | 1 | ||
| 1243339 | Pad, Buff, 20.0d, Red [1pick=1ctn] | 1 | ||
| 1243340 | Pad, Scb, 20.0d, Blu [1pick=1ctn] | 1 | ||
| 1243566 | Pad, Stripping, 20.0d, Brn [1pick=1ctn] | 1 | ||
| 1243661 | Pad, Strip, 20.0d Blk[Hi Prod1pick=1ctn] | 1 | ||
| 1243670 | Pad, Surf Prep, 20.0d Maroon[1pick=1ctn] | 1 |
Service Parts
This section lists various service parts for the Tennant T260 floor scrubber.
| Ref. | Part No. | Mfr. Date | Description | Qty. |
|---|---|---|---|---|
| CN5002458 | Fan, Vacuum | 1 | ||
| CN5001828 | Brush, Motor | 1 | ||
| CN5005651 | Motor, Ele | 1 | ||
| CN5001828 | Brush, Motor | 1 | ||
| 1010560 | Wheel, Bmpr, 80d X 25w, Non- Marking | 1 | ||
| CN5001643 | Fuse, 5a | 1 | ||
| CN5001647 | Fuse, 25a | 1 | ||
| CN5001644 | Fuse, 30a | 1 | ||
| CN5006221 | Cap, Hub, Dust, 28.5mmd 10.8mml | 1 | ||
| CN5006220 | Cap, Tank, Soltn | 1 | ||
| CN5002145 | Float, Level, Red, 6mm | 1 | ||
| CN5004320 | Hose, Silicone, 13mmid X 19mmod | 1 | ||
| CN5004321 | Hose, Silicone, 15mmid X 21mmod | 1 | ||
| CN5002865 | Hose, Silicone, 8mmid X 12mmod | 1 | ||
| CN5002836 | Hose, Sqge, Rear, 38mm Dia | 1 | ||
| CN5006234 | Tray, Debris, Tank, Soltn | 1 | ||
| CN5005711 | Tray, Debris, Tank, Recvy | 1 | ||
| CN5004741 | Filter, Mesh | 1 | ||
| CN4000673 | Seal, Washer, 42.0mmd 22.0mb 11mml | 1 | ||
| CN5003686 | Gasket | 1 | ||
| CN5006246 | Seal, Strip, 420mm X 18mm X 7mm | 1 | ||
| CN5006241 | Cover, Skirt, Brush | 1 | ||
| CN5004736 | Valve, Ball | 1 | ||
| CN4000699 | Caster, Swivel | 1 | ||
| 630477 | Wheel, Pyu, 02.0d 0.38w, Gray | 1 | ||
| CN5006078 | Shaft Wldt, Axle | 1 | ||
| CN5002310 | Wheel, 200.0mmd 50.0mmw 42.0mmb | 1 | ||
| 1251238 | Battery, Agm, 12vdc 0135ah, Cn | 1 | ||
| CN5006264 | Charger, 24v, 15ah | 1 | ||
| 1069835 | Cord, Power, Chrgr, 120vac [S8- Us/Jp] | 1 | ||
| CN5003089 | Sensor, Level, Liq | 1 | ||
| CN5001636 | Fuse, 100a | 1 | ||
| CN5002833 | Hose Assy, Drain, 38mmd 990mml | 1 | ||
| CN5005723 | Cover, Debris, Tank, Recvy | 1 |
Brushes / Pad Driver and Pads, 50 CM / 20 IN DISK
This section details the brush assembly, pad driver, and various pads used with the Tennant T260.
Diagram Description: An exploded view of the brush and pad assembly. Part 1 is the brush assembly. Part 2 is the pad driver assembly with a 3-lug system. Part 3 represents various pads (Polish, Buff, Scrub, Stripping, Surf Prep). Part 4 is the center lock for the pad driver. Part 5 is the center lock flange for the pad holder.
| Ref. | Part No. | Mfr. Date | Description | Qty. |
|---|---|---|---|---|
| 1 | CN5006244 | Brush Assy, Disc, Scb, 50cm | 1 | |
| 2 | CN5006245 | Driver Assy, Pad, 50cm, 3 Lug | 1 | |
| 3 | 1243338 | Pad, Polish, 20.0d, White [1pick=1ctn] | 1 | |
| 3 | 1243339 | Pad, Buff, 20.0d, Red [1pick=1ctn] | 1 | |
| 3 | 1243340 | Pad, Scb, 20.0d, Blu [1pick=1ctn] | 1 | |
| 3 | 1243566 | Pad, Stripping, 20.0d, Brn [1pick=1ctn] | 1 | |
| 3 | 1243661 | Pad, Strip, 20.0d Blk[Hi Prod1pick=1ctn] | 1 | |
| 3 | 1243670 | Pad, Surf Prep, 20.0d Maroon[1pick=1ctn] | 1 | |
| 4 | MPVR04088 | Lock, Center, Pad Driver | 1 | |
| 5 | SPPV00489 | Flange, Center Lock, Pad HolderVac | 1 |
Battery and Charger Group
This section details the battery and charger components for the Tennant T260.
Diagram Description: An illustration of two batteries connected to a charger unit via cables and connectors. Part 1 and 2 are batteries. Part 3 and 4 are washers. Part 5 is a booster pad. Part 6 and 7 are battery pile head covers (black and red). Part 8 is a harness. Part 9 is the charger. Part 10 is the power cord.
| Ref. | Part No. | Mfr. Date | Description | Qty. |
|---|---|---|---|---|
| 1 | 1251238 | Battery, Agm, 12vdc 0135ah, Cn | 2 | |
| 2 | 09740 | Screw, Hex, M8 X 1.25 X 20, Ss | 2 | |
| 3 | CN4000406 | Washer, M8 | 2 | |
| 4 | CN4000373 | Washer, M8 | 2 | |
| 5 | CN5000789 | Gm50b Battery Booster Pad - D | 4 | |
| 6 | CN5002221 | Gm50b Battery Pile Head Cover (Black) | 2 | |
| 7 | CN5002220 | Gm50b Battery Pile Head Cover (Red) | 2 | |
| 8 | CN5003048 | R50b Harness 13 | 1 | |
| 9 | CN5006264 | Charger, 24v, 15ah | 1 | |
| 10 | 1069835 | Cord, Power, Chrgr, 120vac [S8- Us/Jp] | 1 |
Main Frame Group
This section lists components of the main frame assembly, including structural elements, wheels, and mounting hardware.
Diagram Description: An exploded view of the main frame assembly, showing the chassis, wheels, castor, and various brackets, plates, pins, and screws. Key components include the frame structure, front and rear wheels (Part 6), castor wheels (Part 13), axle shafts (Part 9), and numerous fasteners and mounting plates.
| Ref. | Part No. | Mfr. Date | Description | Qty. |
|---|---|---|---|---|
| 1 | CN4000228 | Screw, Soc, M12 X 45, 12.9 | 2 | |
| 2 | CN5006125 | Plate, Castor | 2 | |
| 3 | CN5006077 | Frame Wldt | 1 | |
| 4 | CN5006085 | Plate, Foot, Limiter | 1 | |
| 5 | CN4000062 | Screw, Soc, M5 X 20 | 2 | |
| 6 | CN5002310 | Wheel, 200.0mmd 50.0mmw 42.0mmb | 2 | |
| 7 | 12273 | Screw, Hex, M8 X 1.25 X 20, Nl, Ss | 4 | |
| 8 | CN5006067 | Spring, Extn, 20.0mmd 2.0mmwir 98.0mml | 1 | |
| 9 | CN5006078 | Shaft Wldt, Axle | 1 | |
| 10 | CN5006083 | Bracket, Lh | 1 | |
| 11 | CN5006084 | Bracket, Rh | 1 | |
| 12 | 1016005 | Screw, Hex, M6 X 1.00 X 25, Nl, Fl, Ss | 4 | |
| 12 | 08712 | Nut, Hex, Lock, M6 X 1.00, Nl, Ss | 4 | |
| 13 | CN4000699 | Caster, Swivel | 2 | |
| 14 | CN4000766 | Pad, Brush Pedal, Non- Slip | 1 | |
| 15 | CN5006236 | Plate, Pedal, Arm | 1 | |
| 16 | CN4000904 | Pin, Cotter, 2x40 | 2 | |
| 17 | CN4000375 | Washer, M8 | 2 | |
| 18 | CN5005669 | Bushing, Brs, 8.2mmb 15.0mmd 7.0mml | 5 | |
| 19 | CN4000374 | Washer, M8 | 5 | |
| 20 | CN5006235 | Arm Wldt, Lift | 1 | |
| 21 | CN5006042 | Spring, Extn, 23.5mmd 3.5mmwir 146.0mml | 1 | |
| 22 | 49697 | Screw, Pan, Phl, M4 X 0.70 X 10, Ss | 2 | |
| 22 | 41579 | Washer, Flat, 08, Ss | 2 | |
| 23 | CN5006089 | Bracket, Switch, Mtg | 1 | |
| 24 | CN5006133 | Switch, Micro | 1 | |
| 25 | 06922 | Screw, Pan, Phl, M3 X 0.50 X 20, 4.8 | 2 | |
| 25 | 579211 | Nut, Hex, Lock, M3 X 0.50, Nl, Ss | 2 | |
| 26 | CN5006238 | Plate, Brush, Rh | 1 | |
| 27 | CN5006086 | Washer, 28.0mmd 8.2mmb 6mmt | 1 | |
| 28 | 09023 | Screw, Hex, M8 X 1.25 X 35, Fl, Ss | 1 | |
| 28 | 08713 | Nut, Hex, Lock, M8 X 1.25, Nl, Ss | 1 | |
| 29 | 74440 | Screw, Hex, M8 X 1.25 X 40, Nl, Ss | 3 | |
| 29 | 08713 | Nut, Hex, Lock, M8 X 1.25, Nl, Ss | 3 | |
| 30 | CN5005713 | Washer, 30.0mmd 8.2mmb 3mmt, Ptfe | 2 | |
| 31 | CN5005977 | Spring, Cmpr, 12.0mmd 1.4mmwir 14.0mml | 1 | |
| 32 | 76570 | Screw, Hex, M8 X 1.25 X 30, 8.8 | 6 | |
| 32 | 08713 | Nut, Hex, Lock, M8 X 1.25, Nl, Ss | 6 |
Electrical Group
This section lists the electrical components, including fuses, switches, and contactors.
Diagram Description: An illustration of electrical components including fuses, switches, a contactor, and mounting brackets. Part 1 and 2 are screws and washers. Part 3 represents fuses (5A, 25A, 30A, 100A). Part 4 is a screw. Part 5 is a washer. Part 6 is a mounting bracket. Part 7 is a contactor. Part 8 is a knob.
| Ref. | Part No. | Mfr. Date | Description | Qty. |
|---|---|---|---|---|
| 1 | CN4000194 | Screw, Pan, Phl, M4 X 14 | 2 | |
| 1 | 41579 | Washer, Flat, 08, Ss | 2 | |
| 2 | CN5001636 | Fuse, 100a | 1 | |
| 3 | 579237 | Screw, Pan, Phl, M4 X 0.70 X 12, Ss | 6 | |
| 3 | 41579 | Washer, Flat, 08, Ss | 6 | |
| 4 | CN5001643 | Fuse, 5a | 1 | |
| 5 | CN5001647 | Fuse, 25a | 1 | |
| 6 | CN5001644 | Fuse, 30a | 1 | |
| 7 | CN5006242 | Bracket, Ele, Mtg | 1 | |
| 8 | CN5001703 | Contactor, Sw60- 40p | 2 | |
| 9 | CN5001698 | Knob, Head | 1 |
Control Panel Group
This section details the components of the control panel assembly, including the housing, gauge, and switches.
Diagram Description: An exploded view of the control panel housing and associated components. Part 1 is a battery gauge. Part 2 is a green indicator light switch. Part 3 is the top housing. Part 4 are screws and washers. Part 5 represents safety shutoff and E-stop switches. Part 6 is a key. Part 7 is the bottom housing. Part 8 is a round plug.
| Ref. | Part No. | Mfr. Date | Description | Qty. |
|---|---|---|---|---|
| 1 | CN5006049 | Gauge, Battery | 1 | |
| 2 | CN5006233 | Switch, Light, Green | 1 | |
| 3 | CN5006222 | Housing, Handle, Cntrl, Top | 1 | |
| 4 | CN4001130 | Screw, Pan, Phl, M3.5 X 12, Fmg | 9 | |
| 5 | CN5001546 | Switch, Safety, Shutoff, W/ Key | 1 | |
| 5 | CN5001555 | Switch, E-Stop | 1 | |
| 5 | CN5001519 | Key | 1 | |
| 6 | CN5005689 | Plate, Handle | 1 | |
| 7 | CN5006223 | Housing, Handle, Cntrl, Bottom | 1 | |
| 8 | CN5006111 | Plug, Hole, Rnd, 13mm | 2 |
Wheel Assembly
This section provides details for the wheel assembly components, including wheels, bearings, seals, and axles.
Diagram Description: An exploded view of a wheel assembly, including the wheel, hub cap, axle, bearings, seals, and retaining rings. Part 1 is a hub dust cap. Part 2 is a hex screw. Part 3 and 4 are washers. Part 5 is the wheel. Part 6 are ball bearings. Part 7 is a retaining ring. Part 8 is a seal/washer. Part 9 is the axle shaft.
| Ref. | Part No. | Mfr. Date | Description | Qty. |
|---|---|---|---|---|
| 1 | CN5006221 | Cap, Hub, Dust, 28.5mmd 10.8mml | 2 | |
| 2 | 12273 | Screw, Hex, M8 X 1.25 X 20, Nl, Ss | 2 | |
| 3 | CN4000406 | Washer, M8 | 2 | |
| 4 | CN4000374 | Washer, M8 | 2 | |
| 5 | CN5002310 | Wheel, 200.0mmd 50.0mmw 42.0mmb | 2 | |
| 6 | CN4000522 | Bearing, Ball | 4 | |
| 7 | CN4000499 | Ring, Retaining, Int, 42mmd | 2 | |
| 8 | CN4000673 | Seal, Washer, 42.0mmd 22.0mb 11mml | 2 | |
| 9 | CN5006078 | Shaft Wldt, Axle | 1 |
Motor Assembly
This section lists the components of the motor assembly, including the motor, fan, and housing.
Diagram Description: An exploded view of the motor assembly, including the motor housing, fan, brush, and associated seals, screws, and clamps. Key components are the motor housing (Part 15), motor plate (Part 2), fan (Part 10), brush (Part 11), vacuum cover (Part 6), and various screws, washers, and clamps.
| Ref. | Part No. | Mfr. Date | Description | Qty. |
|---|---|---|---|---|
| 1 | CN4000660 | Seal, Org, 5.3mm X 115mm Id | 1 | |
| 2 | CN5000511 | Plate, Motor | 1 | |
| 3 | 579237 | Screw, Pan, Phl, M4 X 0.70 X 12, Ss | 10 | |
| 3 | 41579 | Washer, Flat, 08, Ss | 10 | |
| 4 | CN5002337 | Fitting, Motor, Mount | 1 | |
| 5 | 06929 | Screw, Pan, Phl, M4 X 0.70 X 25, 4.8 | 4 | |
| 5 | 41579 | Washer, Flat, 08, Ss | 4 | |
| 6 | CN5002144 | Cover, Motor, Vacfan | 1 | |
| 7 | CN5006115 | Mount, Vacfan | 1 | |
| 8 | CN4001030 | Screw, Pan, Phl, M6 X 20 | 3 | |
| 9 | CN5002338 | Gasket, 145.0mm Od 105.0mm Id 6.4mm T | 1 | |
| 10 | CN5002458 | Fan, Vacuum | 1 | |
| 10 | CN5001828 | Brush, Motor | 1 | |
| 11 | CN4000009 | Clamp, Hose, Wormdrive, 33 - 57mm Id | 1 | |
| 12 | CN5003632 | Muffler, Exhaust, Vacfan | 1 | |
| 13 | CN5005973 | Dampener, Ring, 95.6od 77.0id 12.5t | 1 | |
| 14 | CN5006070 | Insulation, Acstc | 1 | |
| 15 | CN5006114 | Housing, Motor | 1 |
Solution Tank Group
This section details the components of the solution tank assembly, including the tank body, covers, fittings, and hoses.
Diagram Description: An exploded view of the solution tank assembly, showing the tank body, covers, fittings, hoses, and mounting hardware. The main tank body is central, with various covers (Part 1, 4, 35, 36), fittings (Part 8, 9, 18), hoses (Part 12, 32), and numerous screws and washers.
| Ref. | Part No. | Mfr. Date | Description | Qty. |
|---|---|---|---|---|
| 1 | 579237 | Screw, Pan, Phl, M4 X 0.70 X 12, Ss | 16 | |
| 2 | CN5005283 | Washer, Nyl, Blk, 14.0mmd 4.5mmb 3.0mmt | 11 | |
| 3 | CN5006225 | Shroud, Frame, Front | 1 | |
| 4 | CN5006097 | Bushing, 9mmod 6mmid 4mmt | 2 | |
| 5 | CN4000231 | Screw, M6 X 14 | 2 | |
| 6 | CN5006213 | Tank, Soltn, Rm- Tl | 1 | |
| 7 | CN5006227 | Plate, Cover, Tank, Soltn, Lh | 1 | |
| 8 | CN5001393 | Fitting | 1 | |
| 9 | CN5001935 | Cap, Soltn, Tank | 1 | |
| 10 | CN5002217 | Washer, Gasket | 1 | |
| 11 | CN5001384 | Fitting, Brs, E90 | 1 | |
| 12 | CN4001008 | Clamp, Hose | 2 | |
| 13 | CN5002145 | Float, Level, Red, 6mm | 1 | |
| 14 | CN5002856 | Gm110 Transparent Tube, ?8 | 1 | |
| 15 | CN4000020 | Clamp, Cable, 24.0mmd, 1hole | 1 | |
| 16 | CN5006228 | Plate, Cover, Tank, Soltn, Rh | 1 | |
| 17 | CN4000194 | Screw, Pan, Phl, M4 X 14 | 1 | |
| 18 | CN5002029 | Fitting | 1 | |
| 19 | CN5001942 | Clip, Hose | 1 | |
| 20 | 06929 | Screw, Pan, Phl, M4 X 0.70 X 25, 4.8 | 2 | |
| 21 | CN4000112 | Screw, Pan, Phl, M4 X 25 | 2 | |
| 21 | 33932 | Nut, Hex, Lock, M4 X 0.70, Nl, Ss | 2 | |
| 22 | CN5006100 | Bracket, Charging | 1 | |
| 23 | 09200 | Screw, Pan, Phl, M5 X 0.80 X 12, Ss | 2 | |
| 23 | 140011 | Washer, Flat, 0.21b 0.45d .03, Ss | 2 | |
| 24 | CN5006059 | Cable, Charging | 1 | |
| 25 | TN5100004 | Switch, Mircro | 1 | |
| 26 | 1013705 | Plate, Thread, Switch, M3 Nut, 96hr Pl | 1 | |
| 27 | CN5006113 | Cover, Plt, Ele | 1 | |
| 28 | CN4001106 | Screw, M4 X 10 | 2 | |
| 29 | CN5005734 | Cover, Wndw | 1 | |
| 30 | CN5001940 | Tray, Battery | 1 | |
| 31 | 24265 | Screw, Pan, Phl, M4 X 0.70 X 16, Ss | 2 | |
| 32 | CN4001158 | Cable, 320mml X 2.5mmd 6.5eye/6.5eye | 1 | |
| 33 | 16879 | Screw, Flt, Soc, M6 X 1.00 X 20, 10.9 | 8 | |
| 34 | CN4001141 | Hinge Assy | 2 | |
| 35 | CN5006220 | Cap, Tank, Soltn | 1 | |
| 36 | CN5006246 | Seal, Strip, 420mm X 18mm X 7mm | 1 | |
| 37 | CN4000781 | Chain | 2 | |
| 37 | CN4000048 | Screw, Phl | 1 | |
| 38 | CN5006234 | Tray, Debris, Tank, Soltn | 1 | |
| N/S | CN5006061 | R45 Wiring Harness 5 | 1 |
Scrub Head Group
This section details the components of the scrub head assembly, including the motor, brush mounting, and pad driver.
Diagram Description: An exploded view of the scrub head assembly, including the brush motor, brush mounting, pad driver, and related components. Key parts include the motor (Part 2), brush motor (Part 3), brush bracket (Part 4), pad driver components (Parts 19, 20, 21, 22, 23), and various screws and washers.
| Ref. | Part No. | Mfr. Date | Description | Qty. |
|---|---|---|---|---|
| 1 | 12273 | Screw, Hex, M8 X 1.25 X 20, Nl, Ss | 4 | |
| 2 | CN5005651 | Motor, Ele | 1 | |
| 2 | CN5001828 | Brush, Motor | 1 | |
| 3 | CN5006239 | Bracket, Brush | 1 | |
| 4 | CN5006090 | Bracket, Brush, Tray | 1 | |
| 5 | CN4000418 | Washer | 1 | |
| 6 | CN5001941 | Guide, Wheel, Blk | 1 | |
| 7 | CN5000974 | Bushing, Brs, 8.2mmb, 12.3mmd, 14mml | 1 | |
| 8 | CN4000374 | Washer, M8 | 2 | |
| 9 | CN5005987 | Washer, Flat, 31.0mmd 18.2mmb 2.0mm | 1 | |
| 10 | 11329 | Screw, Hex, M6 X 1.00 X 16, Nl, Ss | 4 | |
| 11 | 01684 | Washer, Flat, 0.27b 0.69d .05, Ss | 4 | |
| 12 | CN5006241 | Cover, Skirt, Brush | 1 | |
| 13 | CN5006226 | Cover, Brush | 1 | |
| 14 | CN5006080 | Plate Wldt, Brush, Mtg | 1 | |
| 15 | 09200 | Screw, Pan, Phl, M5 X 0.80 X 12, Ss | 2 | |
| 15 | 140011 | Washer, Flat, 0.21b 0.45d .03, Ss | 2 | |
| 16 | CN5005707 | Plate, Clamp, Brush | 1 | |
| 17 | CN5005725 | Clip, Spring, Drive, Hub, Release | 1 | |
| 18 | 1016399 | Screw, Hex, M8 X 1.25 X 30, Nl, Ss | 1 | |
| 18 | 08713 | Nut, Hex, Lock, M8 X 1.25, Nl, Ss | 1 | |
| 19 | 12277 | Screw, Hex, M6 X 1.00 X 20, Nl, Ss | 8 | |
| 20 | CN5005656 | Hub, Drive, 3 Lug, Alm | 1 | |
| 21 | CN4000375 | Washer, M8 | 2 | |
| 22 | 12333 | Screw, Hex, M8 X 1.25 X 25, Ss, Nl | 1 | |
| 23 | CN5006244 | Bush Assy, Disc, Scb, 50cm | 1 | |
| 23 | CN5006245 | Driver Assy, Pad, 50cm, 3 Lug | 1 |
Hose Group
This section lists the components of the hose assembly, including various hoses, fittings, clamps, and a solenoid valve.
Diagram Description: An illustration of the hose assembly, showing various silicone hoses, fittings, clamps, and a solenoid valve. Components include silicone hoses (Part 1, 5, 15), clamps (Part 2, 4), fittings (Part 3, 9, 12, 13, 14), and a solenoid valve (Part 6).
| Ref. | Part No. | Mfr. Date | Description | Qty. |
|---|---|---|---|---|
| 1 | CN5002865 | Hose, Silicone, 8mmid X 12mmod | 1 | |
| 2 | CN5004738 | Clamp, Hose, Spring, 13mmd | 1 | |
| 3 | CN5004737 | Fitting, Str, Adapter | 1 | |
| 4 | CN5004739 | Clamp, Hose, Spring, 20mmd | 5 | |
| 5 | CN5004321 | Hose, Silicone, 15mmid X 21mmod | 1 | |
| 6 | CN5003085 | Solenoid Assy, 24vdc | 1 | |
| 7 | 06933 | Screw, Pan, Phl, M5x0.80x16, 4.8 | 2 | |
| 8 | CN5006088 | Plate, Water, Retaining | 1 | |
| 9 | CN5001436 | Fitting, Brs, E90 | 1 | |
| 10 | CN5004736 | Valve, Ball | 1 | |
| 11 | 24265 | Screw, Pan, Phl, M4 X 0.70 X 16, Ss | 2 | |
| 12 | CN5004733 | Fitting | 1 | |
| 13 | CN5004741 | Filter, Mesh | 1 | |
| 14 | CN5005002 | Fitting, Brs, Str | 1 | |
| 15 | CN5004320 | Hose, Silicone, 13mmid X 19mmod | 2 |
Recovery Tank Group
This section details the components of the recovery tank assembly, including the tank body, covers, filters, and hoses.
Diagram Description: An exploded view of the recovery tank assembly, including the tank body, covers, filters, and hoses. The main tank body is shown with covers (Part 1, 3, 4, 5), a gasket (Part 2), fittings (Part 12), hoses (Part 14, 15), and various screws and washers.
| Ref. | Part No. | Mfr. Date | Description | Qty. |
|---|---|---|---|---|
| 1 | CN5006224 | Cover, Tank, Recvy | 1 | |
| 2 | CN5003686 | Gasket | 1 | |
| 3 | CN5006130 | Cover, Motor | 1 | |
| 4 | CN5005723 | Cover, Debris, Tank, Recvy | 1 | |
| 5 | CN5005711 | Tray, Debris, Tank, Recvy | 1 | |
| 6 | CN5006096 | Bushing, Sleeve, 6.0mmb 9.0mmd 8.0mml | 2 | |
| 7 | 01684 | Washer, Flat, 0.27b 0.69d .05, Ss | 2 | |
| 8 | 11329 | Screw, Hex, M6 X 1.00 X 16, Nl, Ss | 2 | |
| 9 | CN4000405 | Washer, M6 | 2 | |
| 10 | CN5006214 | Tank, Recvy, Rm- Tl | 1 | |
| 11 | CN5003089 | Sensor, Level, Liq | 1 | |
| 12 | CN5002179 | Adapter, Hose, Str | 1 | |
| 13 | CN4000009 | Clamp, Hose, Wormdrive, 33 - 57mm Id | 2 | |
| 14 | CN5002833 | Hose Assy, Drain, 38mmd 990mml | 1 | |
| 15 | CN5002836 | Hose, Sqge, Rear, 38mm Dia | 1 | |
| 16 | N/A | Label Set [T260] | 1 |
Squeegee Adjustment Group
This section details the components of the squeegee adjustment mechanism, including levers, pins, washers, and fasteners.
Diagram Description: An exploded view of the squeegee adjustment mechanism, showing levers, pins, washers, and fasteners. Key components include adjustment levers/brackets (Parts 5, 6, 9), pins (Part 3, 5), washers (Part 2, 4, 8), and fasteners (Part 1, 7, 10, 11).
| Ref. | Part No. | Mfr. Date | Description | Qty. |
|---|---|---|---|---|
| 1 | 06968 | Screw, Hex, M12 X 1.75 X 35, 8.8 | 2 | |
| 2 | 32493 | Washer, Flat, 0.56b 1.38d .11, Stl, Pl | 4 | |
| 3 | CN4001142 | Pin, Clevis, 12mmd X 95mml | 1 | |
| 4 | CN4001004 | Washer, 35mmd 17mmb 0.5mml | 2 | |
| 5 | CN4000904 | Pin, Cotter, 2x40 | 1 | |
| 6 | CN5006094 | Bracket, Lift, Sqge | 1 | |
| 7 | CN5006098 | Sleeve, 12mmb 16mmd 9.2mml | 2 | |
| 8 | CN5004742 | Washer, 45mmd 18mmb 3mml | 2 | |
| 9 | CN5006237 | Plate, Mtg, Sqge | 1 | |
| 10 | 09741 | Nut, Hex, Lock, M12 X 1.75, Nl, Ss | 2 | |
| 11 | 1007108 | Nut, Hex, Lock, M6 X 1.00, Kep, Ext | 2 | |
| 12 | CN4001159 | Cable, 530mml X 3mmd 8.2eye/M6 | 1 |
Squeegee Lift Group
This section details the components of the squeegee lift mechanism, including brackets, switches, and fasteners.
Diagram Description: An exploded view of the squeegee lift mechanism, showing brackets, switches, and fasteners. Components include lift brackets (Part 2, 3), switches (Part 5), and screws/washers (Part 1, 4, 6, 8).
| Ref. | Part No. | Mfr. Date | Description | Qty. |
|---|---|---|---|---|
| 1 | 579237 | Screw, Pan, Phl, M4 X 0.70 X 12, Ss | 2 | |
| 1 | 41579 | Washer, Flat, 08, Ss | 2 | |
| 2 | CN5000028 | Bracket, Lifting, Suction | 1 | |
| 3 | CN5006106 | Arm, Mtg, Switch, Alm | 1 | |
| 4 | CN4000048 | Screw, Phl | 1 | |
| 5 | CN5001521 | Switch, Micro | 1 | |
| 6 | 06921 | Screw, Pan, Phl, M3 X 0.50 X 16, 4.8 | 2 | |
| 7 | CN5001932 | Handle, Sqge, Lower, Lift | 1 | |
| 8 | CN4000068 | Screw, Hex, M6 X 12 | 1 |
Squeegee Assembly, 50 CM / 20 IN
This section provides details for the 50 cm / 20 inch squeegee assembly, including the frame, blades, and mounting hardware.
Diagram Description: An exploded view of the 50 cm / 20 inch squeegee assembly, including the frame, blades, and mounting hardware. Key components are the squeegee frame (Part 1), various blade kits (Linatex, Urethane, Gum - Parts 23, 24, 25), and numerous screws, nuts, washers, wheels, and pins.
| Ref. | Part No. | Mfr. Date | Description | Qty. |
|---|---|---|---|---|
| 9014172 | Squeegee Kit, Linatex, Ci [T300/E/Ss300] | 1 | ||
| 1 | 1230946 | Frame, Sqge, 50cm, Mach [T300] | 1 | |
| 2 | 07786 | Nut, Hex, Std, M8 X 1.25, Ss | 2 | |
| 3 | 140027 | Washer, Flat, 0.35b 0.75d .04, Ss | 4 | |
| 4 | 222460 | Sleeve, P/M, 0.32b 0.50d 0.5l [430ss] | 2 | |
| 5 | 1010560 | Wheel, Bmpr, 80d X 25w, Non- Marking | 2 | |
| 6 | 1016399 | Screw, Hex, M8 X 1.25 X 30, Nl, Ss | 2 | |
| 7 | 1255358 | Screw, Btn, M8 X 1.25 X 85, Ss | 2 | |
| 8 | 1213677 | Knob, Star, 2.00od 4ear M8x1.25 [Yel] | 4 | |
| 9 | 17461 | Pin, Clevis, 0.37d X 1.75l | 2 | |
| 10 | 1216647 | Pin, Cotter, Hair, 0.38d .054 Wir | 2 | |
| 11 | 1017091 | Spring, Cmpr, 0.50od .04wir 00.8l | 2 | |
| 12 | 22290 | Spring, Cmpr, 0.72od .06wir 02.3l | 2 | |
| 13 | 09026 | Screw, Hex, M8 X 1.25 X 40, Ss | 2 | |
| 14 | 630477 | Wheel, Pyu, 02.0d 0.38w, Gray | 2 | |
| 15 | 1222109 | Knob, Sqge, 58l, M6 X 1.00, Plstc | 1 | |
| 16 | 1209631 | Cover, Trap, Water, Sqge | 1 | |
| 17 | 1210756 | Gasket, Trap, Water, Sqge | 1 | |
| 18 | 140154 | Sleeve, P/M, 0.25b 0.38d 0.3l, Pl | 1 | |
| 19 | 140060 | Washer, .505 X .750 X 0.45 Wave | 1 | |
| 20 | 01684 | Washer, Flat, 0.27b 0.69d .05, Ss | 1 | |
| 21 | 12277 | Screw, Hex, M6 X 1.00 X 20, Nl, Ss | 1 | |
| 22 | 1203638 | Retainer, Sqge [T300] | 1 | |
| 23 | 9015731 | Blade Kit, 500mm, Linatex (Standard) | 1 | |
| 23 | 1203953 | Blade, Sqge, Rear, 836l, Linatex[500mm] (Standard) | 1 | |
| 24 | 1203954 | Blade, Sqge, Front, 788l, Linatex[500mm] (Standard) | 1 | |
| 23 | 9015732 | Blade Kit, 500mm, Urethane (Optional) | 1 | |
| 24 | 1215609 | Blade, Sqge, Rear, 836l, Urethane[500mm] (Optional) | 1 | |
| 25 | 1215611 | Blade, Sqge, Front, 788l, Urethane[500mm] (Optional) | 1 | |
| 23 | 9015730 | Blade Kit, 500mm, Gum (Optional) | 1 | |
| 24 | 1215610 | Blade, Sqge, Rear, 836l, Gum[500mm] (Optional) | 1 | |
| 25 | 1215612 | Blade, Sqge, Front, 788l, Gum[500mm] (Optional) | 1 |
