OPPO Wi-Fi 6 Router AX5400 Quick Start Guide

Model: RSD07

Overview

This guide provides instructions for setting up and using the OPPO Wi-Fi 6 Router AX5400. It covers basic setup, mesh networking, and important safety information.

LED Indicator: Visual cues for router status.

Reset Button: Used to restore the router to factory settings.

LAN/WAN Port: For connecting to your network or other devices.

Power Port: Connect the power adapter here.

Mesh Button: Used for setting up mesh networking.

Network Configuration

1. Connect Cables

Connect the router to a power supply. Use a network cable to connect any WAN/LAN port of the router to the incoming network port or the LAN port of the Optical Network Terminal (ONT). The ONT is provided by the broadband provider. If no ONT is provided, connect the incoming network cable directly to any WAN/LAN port.

Diagram Description: Shows a router connected to an ONT via a network cable, with the cable also connecting to a LAN/WAN port on the router. An arrow indicates the connection from the incoming network port to the ONT.

2. Set up the Network

Connect your phone to the router's Wi-Fi. The default Wi-Fi name is on the sticker at the bottom of the router.
Follow the on-screen guide on your phone to complete the configuration.

Scenario 1: Automatic IP acquisition (No broadband account/password required).

Scenario 2: Log in to your broadband account (Requires broadband account and password).

Note: If you have forgotten your broadband account or password, please contact your broadband service provider.

1. Download the OPPO Connect App

Scan the QR code or search for "OPPO Connect" in your phone's app store to download and install the app. Ensure you have the latest version.

System Requirements: Android 8.0 or iOS 13.0 or later.

2. Add the Device to OPPO Connect

Open OPPO Connect and tap "Add Device".
Follow the wizard to search for and add your router.

3. More Settings

Additional settings are available in the app or by visiting oppowifi.com.

Mesh Networking

For larger spaces, multiple OPPO Wi-Fi 6 Routers can be connected in a mesh network.

Method 1: Wireless Mesh Networking

Use an OPPO Wi-Fi 6 Router as the primary router and complete network configuration. The LED indicator should be solid white.
Place a secondary OPPO Wi-Fi 6 Router near the primary router (at least 1 meter apart). Turn on the secondary router. Its LED indicator will blink white three times and then show a solid red light.
Press and hold the Mesh button on the back of the primary router for 3 seconds. The primary router's LED indicator will blink yellow, indicating mesh networking has started.
If the LED indicators of both routers turn solid white, mesh networking is successful. If the primary router's LED blinks red and the secondary router's LED is solid red, mesh networking has failed.

Note: The secondary router must be in a factory state. If it has been configured, press and hold its Reset button for more than 3 seconds to reset it.

Diagram Description: Shows two routers, one primary and one secondary, with a distance indicated between them. A hand is shown pressing the Mesh button on the back of the primary router.

Method 2: Wired Mesh Networking

Repeat steps 1 and 2 from Method 1.
Connect the LAN/WAN port of the primary router to the LAN/WAN port of the secondary router using a network cable.
Press and hold the Mesh button on the back of the primary router for 3 seconds. The primary router's LED indicator will blink yellow, starting wired mesh networking.

Diagram Description: Similar to Method 1, but with a network cable connecting the two routers.

Method 3: Log in to App or Web Admin Page to Set Up a Mesh Network

Repeat steps 1 and 2 from Method 1. Open the OPPO Connect app or log in to oppowifi.com and follow the instructions to set up the mesh network.

LED Indicator Status

Indicator Status	Explanation
Solid white	Network is normal
Blinking white (slowly 3 times)	Startup completed
Blinking white (rapidly 3 times)	Restored to factory settings
Off	The router is not turned on
Solid red	Device not connected to network
Blinking red	Mesh networking failed
Blinking yellow (slowly)	WPS networking
Blinking yellow (rapidly)	Mesh networking

View More Guide

Scan the QR code to view the router configuration video.

Restore Factory Settings

Press and hold the Reset button for 3 seconds. The LED indicator will blink 3 times, and the router will automatically reboot and restore factory settings.

Specs

Model: RSD07
Dimensions (mm): Ø115x210
Working environment: 0°C-40°C, 10%-90% RH (non-condensing)
Adapter specs: Input: 100-240 V AC 50/60 Hz, 0.8 A max; Output: 12 V 2A DC

Safety Information

Read the following information carefully before using this device:

Maintain a distance of at least 20 cm from the device antenna during use.
Radio waves may affect medical implants like pacemakers. Consult your medical device manufacturer.
Use the device between 0°C and 40°C; store between -40°C and 70°C.
Do not pour liquids or insert foreign objects into the device.
Do not put hands inside the device.
Use only manufacturer-approved accessories.
Disconnect the power plug when not in use.
Do not dispose of this product with household waste. Comply with local regulations for disposal and recycling.

	OPPO Pad 2 Technical Specifications and Features Comprehensive technical specifications and features for the OPPO Pad 2 tablet, including device layout, display, battery, camera, SAR values, Hi-Res Audio compatibility, and radio wave specifications. Content is merged into English from original multilingual documentation.
	OPPO CPH2387 Quick Start Guide: Specifications and Features Official quick start guide for the OPPO CPH2387 smartphone, detailing specifications, radio wave information, and basic usage instructions like rebooting and data transfer.
	OPPO Watch 41mm (Wi-Fi) Quick Start Guide - Setup, Features, and Specifications Get started with your OPPO Watch 41mm (Wi-Fi). This quick start guide provides essential information on setup, operations, charging, pairing, and specifications for the OPPO smartwatch model OW19W6.
	OPPO A94 5G Quick Start Guide Concise guide to setting up and using the OPPO A94 5G smartphone, including technical specifications, phone layout, and regulatory information.
	Oppo Reno12 Pro 5G Quick Guide This document provides a quick guide for the Oppo Reno12 Pro 5G smartphone, covering essential setup and usage information.
	OPD2420 EU Declaration of Conformity This document is the EU Declaration of Conformity for the OPPO OPD2420 tablet, confirming its compliance with relevant EU directives and standards.
	OPPO CPH2629 Quick Start Guide: Setup and Features Get started with your OPPO CPH2629 smartphone. This quick guide covers essential setup, data migration, and key features, along with technical specifications.
	OPPO Watch 46mm (LTE) Quick Start Guide Get started with your OPPO Watch 46mm (LTE). This guide provides essential information on setup, operations, charging, pairing, and specifications for the OPPO Watch 46mm (LTE) smartwatch.