SSK SC211 Type-C All-in-One Adapter Product Manual
1. Description
Thank you for choosing SSK brand products. To ensure a good use effect and experience, please read this manual carefully before using the product.
2. Product Interface Diagram
The diagram illustrates the various ports and connections available on the SSK SC211 Type-C All-in-One Adapter. The adapter is depicted with numbered interfaces:
- ① HDMI1 video interface
- ② HDMI2 video interface
- ③ USB2.0 wireless keyboard and mouse interface
- ④ Type-C PD charging port
- ⑤ LED status indicator (lights on after connecting to PD power supply)
- ⑥ VGA interface
- ⑦ RJ45 network port
- ⑧ Type-C cable (connecting to host device)
- ⑨ 3.5mm audio port
- ⑩ TF/SD card slot
- ⑪ 2×USB3.0-A interface
3. Connection Diagram
This diagram shows how to connect various devices to the SSK SC211 adapter. The adapter connects to a laptop via its Type-C male port. From the adapter, you can connect:
- To Laptop: Connect the adapter's Type-C cable to the laptop's Type-C port. A PD charger can also be connected to the adapter's Type-C PD charging port to charge the laptop.
- Video Output: Connect monitors, projectors, or TVs to the HDMI1 (x2), HDMI2 (x2), or VGA (x1) female ports.
- USB Devices: Connect external storage (mobile hard drives, flash drives), keyboards, mice, or other USB peripherals to the USB3.0-A (x2) female ports and the USB2.0-A (x1) female port.
- Network: Connect to a router via the RJ45 network port for wired internet access.
- Storage: Insert SD or TF cards into the dedicated slot.
- Audio: Connect headphones or a microphone to the 3.5mm audio port.
Icons represent: [Laptop], [PD charger], [Router], [Monitor], [Mobile Hard Drive], [TF card], [SD card], [Flash drive], [Bluetooth mouse], [Bluetooth keyboard], [Microphone], [Headphones], [Monitors], [Projectors], [TV].
4. Product Specifications
| Parameter | Details |
|---|---|
| Input | Type-C |
| Output | 2×USB3.0-A; 1×USB2.0-A; 1×Type-C PD; 1×VGA; 2×HDMI; 1×SD/TF; 1xRJ45 (1000Mbps); 1×3.5mm Audio |
| Data Interface | 2xUSB3.0-A Read and write speed up to 5Gbps (approx. 450MB per second), backward compatible with USB2.0/1.1. 1xUSB2.0-A dedicated interface for Bluetooth device. This interface also supports USB2.0 data transmission. |
| HDMI Interface 1 | Supports up to 4K60Hz resolution, supports HDCP |
| HDMI Interface 2 | Supports up to 4K30Hz resolution, supports HDCP |
| VGA Interface | Supports up to 1080P60Hz resolution |
| RJ45 Network Port | Supports Gigabit Ethernet and is backward compatible with 10/100M network |
| SD/TF Card Slot | Supports SD3.0, SD/TF card can be used at the same time, supports hot plug |
| 3.5mm Audio Interface | Supports sound output and microphone input |
| Charging Interface | Type-C interface, supports PD3.0 charging protocol |
| Supported Systems | Windows, MacOs, Android, Linux |
| Size (L*W*H) | 124.2*52.8*18mm |
| Cable Length | 18cm/0.6ft |
| Weight | About 145.6g |
5. Frequently Asked Questions and Notes
- The Type-C interface near the end of the Type-C cable only supports PD charging, has no data function, and cannot provide external power output.
- HDMI1, HDMI2, VGA interfaces can be used at the same time. The product video output supports MST split screen mode, and multiple display devices can be connected at the same time to display different pictures (this function is only for Windows).
- Limited by device performance and interface, when multiple display devices are connected at the same time, the display device may not reach its maximum resolution and refresh rate.
- Please use the original charger of the computer/tablet device for charging. If you need to use another charger to charge, please ensure that the charger supports the PD charging protocol and the charging power meets the minimum requirements of the device.
- When there are many external large-capacity mobile hard disks and other devices, please connect the devices one by one to avoid powering on too many devices at the same time and causing insufficient load.
