User Manual for GLOBAL INDUSTRIAL models including: 436CP50 Octagonal Picnic Table, 436CP50, Octagonal Picnic Table, Picnic Table, Table
Global Industrial 46" Octagonal Picnic Table, Expanded Metal, Red | 436982RD - GLOBALindustrial.ca
User's manual Customer Service US: 1-800-645-2986 Manual del usuario Servicio de atención al Cliente US: 1-800-645-2986 Manuel de l'utilisateur Service à la clientèle Canada: 888-645-2986 Octagonal Picnic Table Models: 436CP50 BK/RD/BL/GN/GY Ref. Qty. 14 24 31 41 54 H1 28 H2 56 H3 28 Contents Description Right Leg Left Leg Leg Support Top Bench M8 x 25 mm Hex Bolt Washer M8 Nylon Lock Nut Warning · Assembly and installation of equipment should be performed by 2 people. · Workers should use OSHA approved safety and lifting equipment. Warning · Ensure that the bench is installed on a level surface. · Ensure surface is of a strong material, preferably concrete. · Use proper mounting hardware. 1 Warning · Do not climb on, under or through tables and benches. · Two people required to move tables and benches. · Do not use if any parts of bench or table are broken or damaged. · Inspect and tighten hardware every six months. · Replace rusted hardware and damaged components. Octagonal Picnic Table User's Manual 1 Lay table top on the ground , bottom up. Attach 1 right leg and 1 left leg onto each corner using the hardware provided. Do not fastened tightly. NOTE: Circular anchoring plates should be facing each other. 2 1 NOTE: Anchoring hardware not included. 4 H1 (x8) H2 (x16) H3 (x8) 2 Attach the remainder of the right and left legs. Then attach leg support in the middle. Ensure that the right leg, left leg, and leg support are all fastened together. Follow same hardware pattern as step 1. Do not fastened tightly. 3 3 3 Attach bench tops to the ends of the legs using the hardware provided. Follow same hardware pattern as step 1. Do not fastened tightly. Once all benches are attached, flip table up and fasten all hardware tightly. 5 2Adobe PDF Library 15.0 Adobe InDesign 16.2 (Windows)