Iceman Slush-Ease™ 1.5L Slushy Maker
Model: RJ62-SERIES
Get to Know Your Slushy Maker
Familiarize yourself with the components of your Slushy Maker:
- 1. Dispenser handle
- 2. Fill hatch door
- 3. Tank with MIN and MAX markings
- 4. Auger
- 5. Tank drip tray
- 6. Cooling cylinder
- 7. Tank locking lever
- 8. Control Panel
- 9. Cup drip tray
- 10. Coaster
- 11. Dispenser nozzle
READ ALL INSTRUCTIONS BEFORE USE
For your safety and continued enjoyment of this product, always read the instruction manual before using.
Control Panel
Understanding the control panel:
- 1. Power Button [Power Icon]
- 2. Ready Light [Ready Light]
- 3. Progress Lights [Progress Lights]
- 4. Time/Temperature Display [Display]
- 5. Thickness Control Buttons [+/- Buttons]
- 6. Slushy Preset Lights (Soft Drink, Juice, Cocktail, Wine, Beer, Custom, Clean)
- 7. Preset Control Buttons [Up/Down Arrows]
- 8. START/STOP Button [Start/Stop Button]
Press and hold both thickness buttons for 3 seconds to switch between °F and °C.
SAFETY INSTRUCTIONS & IMPORTANT SAFEGUARDS
When using electrical appliances, basic safety precautions should always be followed:
- Read all instructions.
- Remove all packaging materials before use.
- Never leave the appliance unattended when in use.
- Ensure the appliance is cleaned thoroughly before use.
- Do NOT use the appliance for anything other than its intended household use. Do not use outdoors.
- To prevent electric shock, do not submerge the cord, plugs, motor unit, or any electrical parts in water or other liquids.
- Do NOT operate with a damaged cord or plug, or if the appliance malfunctions, has been dropped, or damaged in any manner. Contact Chefman Customer Support for assistance.
- Do NOT place the appliance on or near hot surfaces like gas or electric burners, or in a heated oven.
- Refrain from using attachments not recommended by Chefman, as this may result in fire, electric shock, or personal injury.
- Do NOT let the cord touch hot surfaces or hang over edges of tables or counters.
- This appliance can be used by persons with reduced physical, sensory, or mental capabilities or lack of experience or knowledge, if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved.
- Children should be supervised not to play with the appliance.
- Avoid contact with moving parts.
- Always unplug the appliance before moving, cleaning, storage, and when not in use.
- Always place the unit on a firm and stable surface before use.
- Improper use can result in property damage or personal injury.
- Never use abrasive cleaning agents when cleaning the unit.
- The unit should remain upright at all times. If turned on its side or upside down, wait 24 hours before using.
SAVE THESE INSTRUCTIONS FOR HOUSEHOLD USE ONLY
WARNING: Improper use of the grounding plug can result in electric shock.
GROUNDING INSTRUCTIONS
This appliance must be grounded. Grounding reduces the risk of electric shock by providing an escape wire for the electric current in the event of an electrical short circuit. This appliance is equipped with a cord having a 3-prong grounding-type plug for insertion into a proper grounding-type electrical outlet.
DO NOT alter the plug for use in a 2-prong outlet. If the plug will not fit into an outlet, have a proper outlet installed by a qualified electrician.
Short Cord Instructions
A short power-supply cord is provided to reduce hazards of entanglement or tripping. Longer detachable power-supply cords or extension cords are available and may be used if care is exercised. If a longer detachable power-supply extension cord is used:
- The marked electrical rating of the extension cord should be at least as great as the electrical rating of the appliance.
- If the appliance is grounded, the extension cord should be a grounding-type 3-wire cord.
- The longer cord should be arranged so it does not drape over countertops or tabletops where it can be pulled on by children or tripped over.
Power Cord Safety Tips
- Never pull or yank on the cord or the appliance.
- To insert the plug, grasp it firmly and guide it into the outlet.
- To disconnect the appliance, grasp the plug and remove it from the outlet.
- Never use the product if the power cord shows signs of abrasion or excessive wear. Contact Chefman® Customer Support for additional guidance and support.
- Never wrap the cord tightly around the appliance, as this could place undue stress on the cord where it enters the appliance and cause it to fray and break.
DO NOT OPERATE THE APPLIANCE IF THE POWER CORD SHOWS ANY DAMAGE OR IF THE APPLIANCE WORKS INTERMITTENTLY OR STOPS WORKING ENTIRELY.
California Proposition 65: (Applicable for California Residents only) WARNING: Cancer and Reproductive Harm www.P65Warnings.ca.gov
Do not place the appliance on a stovetop or any other heatable surface, even if stovetop is not on. Doing so is a fire hazard. [Fire Hazard Symbol]
Before First Use
[Warning Icon]
- Remove all packaging materials and check to ensure that all parts and accessories are accounted for. Read and remove all stickers, except for the rating label, which should remain on the unit.
- Remove and hand wash the tank, auger, tank drip tray, and cup drip tray/coaster.
- Wipe down the unit housing with a soft, damp cloth. Do not immerse the unit in water or other liquids. Never use abrasive cleaning agents, which can damage the finish.
- Assemble the handle: Slide the handle onto its stalk, then snap into place. Once assembled, the handle cannot be removed from the stalk.
Diagram showing handle assembly
Quick Start: How to Make a Slushy
- Ensure the tank drip tray is in place and pushed all the way in. Install the auger, making sure the end is completely seated on the point of the cooling cylinder.
- Slide the tank on over the auger, pushing it all the way in. Lock it in place with the tank locking lever.
- Plug in the unit. Pour your slushy mixture into the tank through the tank fill hatch. Make sure the mixture is between the MIN and MAX markings on the tank. For the fastest processing, prechill the ingredients. CAUTION: Do NOT fill the tank with only water, which can damage the machine.
- Use the preset selection buttons to choose your slushy type. The preset will automatically choose the typical thickness, although you can modify it with the Thickness +/- buttons—a lower temperature means a thicker drink. Alternatively, choose Custom, then use the Thickness +/- buttons to select the thickness manually.
- Press START/STOP. The unit will begin chilling and mixing the slushy mixture. The time depends on your chosen presets and the temperature of your ingredients, but usually ranges between 19 and 25 minutes. NOTE: Occasionally you may notice that when the slushy maker is close to reaching its target temperature, it suddenly drops very low and then quickly climbs back up. This is normal.
- When the slushy is ready, the unit will beep, and the Ready light will illuminate. Place a cup under the nozzle and gently pull down the dispenser to serve the slushy. NOTE: When dispensing, pull from the entire length of the lever. Pulling just from the end of the lever can damage it, especially with very thick slushies. If the slushy is so thick that it won't come out, run the unit on the cleaning cycle for a few minutes, which will raise the temperature just enough to let it dispense.
- After the slushy is ready, the unit will hold the mixture in the tank at the final temperature for up to 4 hours (the timer will count up the time). The auger will continue to rotate to keep the slushy well mixed. You can continue to dispense slushies throughout this holding period, though the slushy will be at its thickest immediately after it's ready. NOTE: To preserve the life of the compressor, it is not recommended running the unit beyond this 4-hour holding period.
Slushy Inspiration
As the presets suggest, you can make a fantastic slushy with just one ingredient: beer, wine, soft drinks, fruit juice, etc. You can also create custom mixes. Refer to "Slushy Science" on page 14 for tips on temperature and proportions.
Margarita
Ingredients:
- 3 cups limeade
- 1 cup tequila
- ¼ cup water
- ½ cup orange juice
- ½ cup simple syrup
- 3 Tbsp. fresh lime juice
Instructions: Combine ingredients in a measuring cup. Add to the slushy maker tank. Process on the Cocktail setting. Dispense into a margarita glass with a salted rim, and garnish with a slice of lime.
Variation: For a spicy margarita, use a jalapeno-infused simple syrup, serve in a glass rimmed with tajin (chili-salt) and garnish with a slice of jalapeño.
Strawberry Frosé
Ingredients:
- 4 cups rosé wine
- 1 cup water
- ½ cup strawberry purée
- ¼ cup triple sec
Instructions: Stir ingredients until well mixed, then add to the slushy maker tank. Process on the Wine setting. Serve in a wine glass, garnished with a strawberry.
Frozen Latte
Ingredients:
- 3¾ cups cold-brew coffee
- 1½ cups whole milk
- ¼ cup heavy cream
- ½ cup sugar
Instructions: Stir ingredients until well mixed, then add to the slushy maker tank. Process on the Custom setting at 29-29.8°F. Dispense into a glass and garnish with whipped cream, if desired.
(For a stronger coffee flavor, reduce the amount of cream and add more cold brew).
Blue Raspberry Slushy
Ingredients:
- 4 cups water
- 1 cup raspberry simple syrup
- 12 drops blue food coloring
Instructions: Stir ingredients until well mixed, then add to the slushy maker tank. Process on the Juice setting. Dispense into a tall glass and garnish with a cherry.
Slushy Science: Getting the Perfect Thickness
The thickness of your slushy is affected by temperature, sugar content, and alcohol content. You can manually control thickness using the Custom program or by adjusting the +/- buttons.
Temperature
Lower temperatures result in thicker slushies. Pressing the plus (+) thickness control button lowers the temperature displayed. Slushies are thickest immediately after the cycle ends. If a batch is too thick, let it hold for several minutes before dispensing. If too thin, increase the thickness and run the cycle again. If temperature adjustments don't yield the desired consistency, experiment with ingredients.
Sugar Content
Sugar is essential for freezing. Your mixture should contain at least 4% sugar. For packaged ingredients, aim for 1g of sugar per 1 oz of serving size (check the "Total Sugars" on the nutrition label). If insufficient, add granulated sugar, simple syrup, agave nectar, honey, maple syrup, soda, or fruit juice. Allulose is a suitable sugar substitute. Diet sodas and unsweetened waters require added sugar or allulose for successful freezing.
Adding sweetness can also enhance flavor, as freezing mutes flavors.
Alcohol Content
Excessive alcohol (over 16%) inhibits freezing, resulting in a thin or unfrozen mixture. Beers, hard seltzers, most wines, and cocktails made with bottled mixes are typically within this limit. Fortified wines and strong cocktails may exceed it. To adjust alcohol content, dilute the mixture with non-alcoholic liquids like water, juice, cocktail mixer, soda, or seltzer.
Will it Slush? 1-Ingredient Slushy Ideas
Ingredient | Will It Slush? | Tips |
---|---|---|
Sports drink, such as Gatorade | Yes, on Custom setting at 29-29.8°F | |
Bottled coffee-and-milk drink, such as Starbucks Latte | Yes, on Custom setting at 28.8-29.8°F | |
Limeade | Yes, on Custom setting at 28.8-29.4°F | |
Lemonade and sweetened iced tea | Yes, on thickest Juice setting | |
Protein shake | No | High protein/low sugar makes it freeze unevenly and cause problems with the machine. |
Kombucha | Yes, on Custom setting at 29.8°F | |
Sour beer | Yes, on thickest Beer setting or Custom at 22-22.4°F | Also tasty mixed with juice, but process on Juice setting. |
Coconut water | Yes, on Custom setting at 29.6°F | |
Hard Seltzer | Yes, on Custom setting at 26°F | |
IPA beer (7.5% alcohol) | Yes, on thickest Beer setting | Because IPAs are higher in alcohol, they need a lower temperature than regular beer. |
Gose | Yes, on thickest Beer setting |
Simple Cocktail Ratios
When making frozen cocktails with bottled mixers, use these amounts and process them on the Cocktail setting for the best results.
Cocktail | Mixer | Alcohol | Water |
---|---|---|---|
Margarita | 3½ cups | ½ cup tequila | 2½ cups |
Piña Colada | 2 cups | ¼ cup rum | 2½ cups |
Strawberry Daiquiri | 1½ cups | ¼ cup rum | 3½ cups |
Keep It Clean
The automatic cleaning cycle makes it easy to keep your unit in top condition. Perform this cleaning cycle after each use:
- Remove the tank and empty any remaining slushy. Remove and rinse off the auger.
- Reinstall the auger on the unit, then reinstall the tank, making sure to lock it in place with the locking lever.
- Add water to the tank up to the MAX fill line. Add a few drops of dishwashing liquid.
- On the control panel, select Clean, then press START/STOP.
- The auger will swish soapy water around the tank while the timer counts down the cleaning cycle. When the cycle is finished, the unit will beep and the Ready light will illuminate.
- Unlock and remove the tank. Discard the soapy water and rinse the tank and auger thoroughly, then dry with a soft cloth.
- Wash the tank drip tray, cup drip tray, and coaster with mild soap, then rinse and dry thoroughly.
- All removable parts are also top-rack dishwasher safe.
- Be sure the parts are completely dry before reassembling for storage.
Having Trouble?
Problem | Potential Cause | Solution |
---|---|---|
Auger is making a loud noise. | Low sugar content of slushy mixture causes the evaporator to freeze or temperature is set too low. | Add sugar, syrup, etc. to slushy mixture (see p. 14 for other ingredients containing sugar). |
Auger scrapes the inside of the tank or flings liquid onto the sides. | Auger could need cleaning or be deformed. | Remove, clean and re-install auger. If the issue persists, check to see if the auger is dented, warped, or chipped. If so, contact Iceman Customer Support for a replacement auger. |
"OP" shows on display | Auger or tank may not be properly installed or locked. | Ensure auger is properly installed. Remove and re-install tank and lock. If the issue persists, contact Iceman Customer Support. |
E1 shows on display | Sensor is short-circuited. | Power the unit off and on again. If the problem persists, contact Iceman Customer Support. |
E2 shows on display | There is an issue with the sensor. | Power the unit off and on again. If the problem persists, contact Iceman Customer Support. |
E3 shows on display | Motor is blocked or Hall sensor has a problem, potentially caused by ingredients overfreezing. | Power the unit off. Add warm, not hot, water (removing some mixture first if necessary), power back on and run a cleaning cycle. Increase sugar in slushy mixture for subsequent batches. If the issue persists, contact Iceman Customer Support. |
Terms & Conditions
Limited Warranty
RJ Brands, LLC d/b/a Chefman® offers a limited 1-year Warranty available on sales through authorized distributors and retailers only. This Warranty becomes valid from the date of initial retail purchase and is nontransferable, applying only to the original purchaser.
This Warranty is void without proof of purchase within the United States and Canada. This Warranty supersedes all other warranties and constitutes the entire agreement between the consumer and Chefman®. Any changes to the Terms and Conditions of this Warranty must be in writing, signed by a Chefman® representative.
Chefman may request photos and/or video of the issue to assess the matter and offer a quick fix. Photos and/or video may also be required to determine Warranty eligibility.
Registering your product can make the Warranty process easier and keep you informed of updates or recalls. Follow the directions on the Chefman® Warranty Registration page in the Chefman® User Guide. Retain your proof of purchase even after registering. If proof of purchase date is unavailable, the date of manufacture may be used as the purchase date at Chefman's sole discretion.
What the Warranty Covers
- Manufacturer Defects – Chefman® products are warranted against defects in material and workmanship, under normal household use, for a period of 1 year from the date of purchase when used in accordance with the directions listed in the Chefman® User Guide. If your product does not work as it should, please contact Customer Support at support@chefman.com.
This Warranty Does Not Cover
- Misuse: Damage from neglectful or improper use, including but not limited to:
- Damage from usage with incompatible voltage.
- Using the machine with only water (except on the cleaning cycle) will void the warranty. Refer to the Chefman User Guide for information on proper product use.
- Poor Maintenance: General lack of proper care. Refer to "Keep It Clean" directions for proper maintenance.
- Commercial Use: Damage from commercial use.
- Normal Wear and Tear: Damage or degradation due to normal use over time.
- Altered Products: Damage from alterations or modifications by any entity other than Chefman®, such as removal of the rating label.
- Catastrophic Events: Damage from fire, floods, or natural disasters.
- Loss of Interest: Claims of loss of interest or enjoyment.
For product information, please visit us at Chillwithiceman.com.
EXCEPT WHERE SUCH LIABILITY IS REQUIRED BY LAW, THIS WARRANTY DOES NOT COVER, AND CHEFMAN® SHALL NOT BE LIABLE FOR, INCIDENTAL, INDIRECT, SPECIAL, OR CONSEQUENTIAL DAMAGES, INCLUDING WITHOUT LIMITATION, DAMAGE TO, OR LOSS OF USE OF THE PRODUCT, OR LOST SALES OR PROFITS OR DELAY OR FAILURE TO PERFORM THIS WARRANTY OBLIGATION. THE REMEDIES PROVIDED HEREIN ARE THE EXCLUSIVE REMEDIES UNDER THIS WARRANTY, WHETHER BASED ON CONTRACT, TORT OR OTHERWISE.
Warranty Registration
What do I need to register my product?
- Contact Information
- Model Number (see example below)
- Proof of Purchase (online confirmation, receipt, gift receipt)
- Date Code (see example below)
- Access Code (see example below)
CHEFMAN
Model/Modele: XXXXX
Conveyor toaster
120v~60hz 1800W
CONFORMS TO UL STD. 1026
CERTIFIED TO CSA STD.C22.2 No.64
CAUTION: DO NOT IMMERSE IN WATER
ATTENTION: NE PAS PLONGER DANS L'EAU
WARNING: TO PREVENT ELECTRIC SHOCK, UNPLUG BEFORE CLEANING
PRÉAVIS: POUR ÉVITER LES CHOCS ÉLECTRIQUES, DÉBRANCHEZ L'APPAREIL AVANT DE L'UTILISER
READ INSTRUCTIONS BEFORE USING
LISEZ LES INSTRUCTIONS AVANT DE L'UTILISER
HOUSEHOLD USE ONLY
POUR USAGE DOMESTIQUE SE LEMENT
Made in China/Fabrique en Chine
AC Only/ AC Seulement
Date Code: 0000
Access Code: XXXXXXXX
NOTE: Label depicted here is an example. Please see label on your product for actual model/date code/access code.
How do I register my product?
Fill out a simple Chefman® registration form. Access the form in one of two ways:
- Visit Chefman.com/register.
- Scan the QR code to the right to access the site. [QR Code]