Energy Sistem Earphones Bluetooth® Style 1

Introduction

Thank you for trusting Energy Sistem and purchasing the new Earphones Bluetooth® Style 1. We hope you enjoy the product.

We recommend reading this manual before you start using your Earphones Bluetooth® Style 1.

Care and maintenance

• Do not expose your Earphones Bluetooth® Style 1 to impacts, dust, humidity, or high temperatures.
• Do not use corrosive or abrasive cleaning products.
• Keep the earphones clean and free of dust using a soft, dry cloth.
• Do not dismantle the device. All repair works should be carried out exclusively by qualified staff of Energy Sistem Technology, S.A.
• Please make sure your Earphones Bluetooth® Style 1 are off when you are not using them. Do not let them completely discharged for a long time.

Features

Connectivity

• Bluetooth® 5.1 wireless technology
• Supports HSP / HFP / A2DP / AVRCP protocols
• Compatible with SBC codecs
• Multipoint connection
• Range: 20 m
• Frequency band: 2.4 GHz
• Maximum output power: <20 dBm

Drivers

• Frequency response: 20 - 20,000 Hz
• Driver diameter: 14 mm
• Maximum power: 5 mW
• Type: dynamic
• THD: < 1%

Microphone

• Sensitivity: -42 dB ± 3 dB (@1 kHz)

Battery

• Capacity: 100 mAh / 3.7 V
• Type: lithium-polymer battery
• Battery life: 8 hours*
• Charging port: USB Type-C
• Charging time: 2 hours

Note: Approximate battery life at a medium volume level. Higher volume means higher battery consumption.

Product content

• Earphones Bluetooth® Style 1
• USB Type-C charging cable

General overview

The earphones feature the following controls and indicators:

• 1. Volume +: Press to turn up the volume. Press and hold to skip to the next track.
• 2. Multifunction button: Used for power on/off, play/pause, answering/ending calls, and activating the voice assistant.
• 3. Volume -: Press to turn down the volume. Press and hold to skip to the previous track.
• 4. USB charging port: Connect the USB Type-C cable for charging.
• 5. LED indicator: Shows the status of the earphones (e.g., charging, pairing).
• 6. Microphone: For calls and voice commands.

Main Functions

Switching on the device

Press and hold the Multifunction button (2) for 2 seconds. The LED indicator (5) will light up blue, and you will hear a confirmation sound.

Switching off the device

Press and hold the Multifunction button (2) for 3 seconds. The LED indicator (5) will glow red for 2 seconds, and you will hear a confirmation sound.

Charging the battery

When the battery level is low, the LED indicator (5) will flash red. Connect the charging cable to the USB charging port (4). The LED indicator (5) glows red while charging and turns blue when fully charged. Charging takes approximately two hours.

Important: To preserve battery life, charge the earphones at least once a month, even if unused.

Bluetooth® pairing

Turn off the earphones. Press and hold the Multifunction button (2) for approximately 4 seconds until the LED indicator (5) starts flashing blue. On your device, select "Earphones Bluetooth® Style 1" and press "connect". Pairing is automatic and does not require a code. A confirmation sound will play upon successful pairing.

If previously paired, simply turn on the earphones and enable Bluetooth on your device.

Auto power off function

The earphones will automatically turn off after 5 minutes in Bluetooth search mode if not connected to any device.

Playback control

• Play/Pause: Press the Multifunction button (2) once.
• Volume + / Volume -: Press Volume + (1) to increase volume or Volume - (3) to decrease volume.
• Skip to next/previous track: Press and hold Volume + (1) for the next track or Volume - (3) for the previous track.

Call control

Once synchronized with your smartphone, you can control calls from the earphones:

• Answering/Ending a call: Press the Multifunction button (2) once.
• Rejecting a call: Press and hold the Multifunction button (2) for 2 seconds.

Voice Assistant

Press the Multifunction button (2) twice while playback is paused.

Warranty

Find the full warranty terms and conditions at: https://www.energysistem.com/terms-warranty

Trademarks

All company, brand, and product names are trademarks or registered trademarks of their respective companies. Specifications are subject to change without notice.

© 2022 by Energy Sistem Technology, S.A. All rights reserved.

Declaration of conformity

Issuer's name: Energy Sistem Technology, S.A. - CIF: A53107488

Address: C/ Calpe, 1 - 03509 Finestrat, Alicante (Spain)

We declare under our sole and exclusive responsibility that the product:

• Description: Bluetooth® earphones
• Brand: Energy Sistem
• Model: Earphones Bluetooth® Style 1
• Manufacturer: Energy Sistem Technology, S.A.
• Manufacturing country: China

referred to in this declaration complies with the essential norms and standards:

• EN 50663:2017
• EN 62479:2010
• EN 62368-1:2014+A11:2017
• EN 301 489-17 V3.2.2 (2019-12)
• EN 301 489-1 V2.2.3 (2019-11)
• EN 300 328 V2.2.2 (2019-07)

in conformity with the provisions of the Directive 2014/53/EU of the European Parliament and of the Council of 16th April 2014.

Finestrat, 1st June 2022

Miguel Ángel Aragüez García
Innovation and Technology Director

[CE marking]