USER MANUAL

FCC Statement

Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

SPECIFICATIONS

• High precision strain gauge
• Capacity: 0.1-180kg (0.2-396lb)
• Division: 0.05Kg/0.1lb
• Auto step on/Auto off
• Low battery/Overload indication
• Unit: kg/lb
• Power: 3xAAA batteries
• Working temperature: 5-40°C
• Size: (280*280*25mm)

Maintenance

• The four feet of the scale are rubber components; do not keep the scale loaded for a long time. This may damage the weight sensors and the scale will not be accurate.
• Do not put anything on the scale when not in use. This will consume the power and reduce the lifetime of batteries.
• Keep the product away from water. Avoid slipping or damaging while weighing.
• Do not drop the product; avoid the risk of damaging the scale or breaking the glass.

Regular weighing

1. Put the scale on a hard and flat floor. To ensure accuracy, please don't stand still on uneven surfaces.
2. Stand still on the scale to start weighing.
3. The scale will show weight on the screen.
4. The scale will automatically turn off in about 8 seconds to save power.
5. This product is designed for continuous weighing. You can continuously weigh before it turns off.

INDICATION SYMBOL

• Low Power Indication: When battery voltage is 3.3V ± 0.2V, the display shows "Lo". Please change the batteries immediately. Batteries may be permanently damaged if kept in low power mode for a long time.

Accuracy Tolerances

Overload Indication: If the weight exceeds the maximum capacity (182.5kg/405.5lb), the display shows "Err".

Notes

• This product is a bathroom scale, for body weighing only; please don't use it for commercial purposes.