ClosetMaid Selectives Standard Closet System Installation Tips

Kit Includes:

• Tower with Rods
• Drawer
• Doors
• Top Shelves
• Hardware

Parts

A visual representation of the closet system components is provided, showing the tower with rods, a drawer with a handle, a door kit with two doors, a top shelf, and top shelf brackets.

Getting Started

• Please refer to the instruction sheet provided in the product package for a list of the required and recommended tools.
• Double check you have all included parts for the products.
• Examine your space and plan where you want to install your tower(s) and rods.
• Assemble and place your tower(s), making sure they are attached to the wall as instructed.
• Measure the rod lengths for each side. The distance between the unit(s) and wall(s) should not exceed 48 in. as the top shelves and closet rods fit a maximum of 48 in.
• The closet rods can expand between 30 in. to 48 in. If your desired length is less than 30 in., the rod will need to be cut.
• Install the closet rods and top shelves.
• Install the drawers.
• Install the doors.