WHARFEDALE PRO SVP-15B Professional Speaker User Manual

User Manual for WHARFEDALE PRO models including: SVP-15B Professional Speaker, SVP-15B, Professional Speaker, Speaker

WHARFEDALE PRO SVP-15B (01) PDF MANUAL - Manual-Hub.com

File Info : application/pdf, 2 Pages, 1.40MB

WHARFEDALE PRO SVP-15B (01)

Model name

SVP-10

SVP-12

SVP-12M

SVP-15

SVP-215 SVP-15B SVP-18B

FREQ RESP +/- 3 DB COVERAGE (H X V) POWER HANDLING (Watts) Continuous Music peak SENSITIVITY 1W@1M PEAK SPL SYSTEM IMPEDANCE L F DRIVER SIZE Driver size Coil Size (mm/ins) HF SECTION Coil Size (mm/ins) Exit Size (mm/ins) HF Protection HF HORN CROSSOVER SECTION: Crossover frequency High Pass Out ENCLOSURE TYPE Shape Finish Colour Stand Adaptor Protect Corner Handle INPUT CONNECTOR

65-20kHz 90 X 60
100 200 400 96dB 121.5dB 8
10" 39/1.5"
25 / 1" 30/1.2"
Bulb Elliptical
3.2k No
Trapezoid Carpet/Black
Yes Black metal
2 2 x 1/4"phone

50-20kHz 90 X 60
150 300 600 97dB 124.5dB 8
12" 51/2"
25 / 1" 30/1.2"
Bulb Elliptical
3.2k No
Trapezoid Carpet/Black
Yes Black metal
2 2 x 1/4" phone

50 - 20kHz 90 X 60
150 300 600 97dB 124.5dB 8
12" 51/2"
25 / 1" 30/1.2"
Bulb Elliptical
3.2k No
Floor monitor Carpet/Black
No Black metal
2 2 x 1/4" phone

45-20kHz 90 X 60
200 400 800 98dB 126dB 8
15" 51/2"
25 / 1" 30/1.2"
Bulb Elliptical
3.2k No
Trapezoid Carpet/Black
Yes Black metal
2 2 x 1/4" phone

40-20kHz 90 X 60
250 500 1000 101dB 129.5dB 4

45-250Hz
250 500 1000 98dB 126.5dB 8

40-250Hz
300 600 1200 99dB 129.5dB 8

15" 38/1.5"

15" 65/2.5"

18" 75/3"

25 / 1"

30/1.2"

Bulb

Elliptical

3.2k

150Hz/6dB

Trapezoid Carpet/Black
No Black metal
2 2 x 1/4" phone

Rectangular Carpet/Black
Yes Black metal
2 2 x 1/4" phone

HIGH PASS OUT

1/4" phone

DIMENSIONS (H x W x D) WEIGHT

494 x 317 x 288 554 x 428 x 355 415 x 248 x 554 638 x 463 x 390 1014 x 463 x 390 587 x 548 x 429 748 x 548 x 450

10.28kg

15.58kg

14.9kg

19.26kg

31.0kg

31.52kg

38.56kg

SVP-15B AND SVP- 18B SUB-WOOFER:
Application
For extended bass response in a multi way (2 or more) equalized system designed for high quality reproduction of voice, music and musical instruments, for mobile or fixed installations.
Description
These cabinets are all covered in tough impact resist carpet. They are designed for portability and are fitted with heavy duty handles and a `kick -proof' steel protective grille. The SVP-18B and the SVP15B have two 1/4" phone type jack sockets and are paralleled at the rear of each cabinet. (See diagram ).
A very special feature of these products is that they have built-in crossovers with high-pass outputs. This means that you may use one channel of your power amplifier to power both a subwoofer and a full-range speaker, while maintaining a reason-able load on your amplifier. The amplifier only sees the subwoofer/crossover load which is 8 ohms for SVP series subwoofers. Without the built-in crossover, the combined impedance of full-range and subwoofer speakers in parallel would be much lower. Also, the high-pass crossover output removes the very low bass frequencies from the signal going to the full-range speaker. This prevents distortion (and possible damage) from excessive low-frequency energy getting into the full-range speaker.

911.400
Wharfedale International Limited, IAG House, Sovereign Court, Ermine Business Park, Huntingdon, Cambs, PE29 6XU England WHARFEDALE website : www.wharfedalepro.com
IAG Professional reserve the right to alter or improve specifications without notice.All rights reserved © 2004 Wharfedale Pro. A member of the International Audio Group

SVP SERIES PROFESSIONAL SPEAKER USER MANUAL
SVP-10 · SVP-12 · SVP-12M · SVP-15 · SVP-215 · SVP-15B · SVP-18B
WARNING & SAFETY INSTRUCTIONS

1. READ INSTRUCTIONS carefully before operating this product.
2. RETAIN these instructions.
3. COMPLY WITH WARNINGS - All warnings and instructions for this product should be adhered to.
4. USE WITH AMPLIFIERS - In order to avoid damage, it is advisable to establish and follow a pattern for turning on and off any sound system. With all system parts connected, turn on source equipment, tape decks, instruments, mixers, signal processors etc., BEFORE turning on your power amplifier. Many products output turn on and turn off transients that can damage speakers. By turning on your power amplifier LAST and making sure the amplifier's input controls are at minimum any transients "upstream" of the amplifier are not amplified and passed to the speaker. Wait until all system parts have stabilised, then bring up amplifier controls to operating level. This should take no more than a few seconds. Similarly when shutting systems down, always turn down amplifier input controls and then turn off your amplifier BEFORE shutting down other components. Professional amplifiers often feature delayed turn on/off circuits to perform these functions for you automatically.

5. CABLES - Never use shielded or microphone cable for any speaker connection as this will not be heavy enough to handle the amplifier load and could cause damage to the complete system.
6. RIGGING · SUSPENDING · MOUNTING The rigging, suspension or mounting of this speaker system can expose members of the public to serious health risks and even death. UNDER NO CIRCUMSTANCES ATTEMPT TO RIG, SUSPEND OR OTHERWISE MOUNT THIS SYSTEM UNLESS YOU ARE FULLY QUALIFIED AND CERTIFIED TO DO SO BY RELEVANT LOCAL, STATE AND NATIONAL AUTHORITIES. ALL RELEVANT SAFETY REGULATIONS MUST BE FOLLOWED. IF YOU ARE NOT PROPERLY QUALIFIED OR DO NOT KNOW OF PERTINENT REGULATIONS, CONSULT QUALIFIED PERSONNEL FOR ADVICE AND ASSISTANCE.
7. CAUTION: These professional loudspeaker systems are capable of generating very high sound pressure levels. Use care with placement and operation to avoid exposure to excessive levels that can cause permanent hearing damage.
8. SERVICING - The user should not attempt to service this product.

Wharfedale Pro SVP Series of Professional Sound Reinforcement Loudspeakers

Reliable, Durable construction

Trapezoid shape for arraying cabinets

Proprietary designed, high efficiency, high power Wharfedale Professional drive units.
Protective grills
Integral High Frequency Driver Overload protection "PRO-TECH"TM
Sophisticated crossover design enables smooth power and frequency response control through crossover region

Integral tripod stand adaptor Low resonance enclosure design Full range and complimentary Sub Bass systems Exceptional sound quality, with broad bandwidth
and dynamic range High Power Handling Metal corner protectors

Unpacking All Wharfedale Pro products are fully checked before leaving the factory. After unpacking please inspect cabinets for any physical damage. Please retain the shipping carton if possible and internal packing material in case the unit needs to be returned. Please check as soon as possible the unit is functioning. In the event of any damage please contact your dealer immediately so that a written claim for damages can be made.

Wharfedale Pro Limited Warranty* Wharfedale Pro SVP Series loudspeaker systems are warranted to be clear of manufacturing or materials defects for a period of one year from the original date of purchase. In the event of malfunction, contact your authorised Wharfedale Professional dealer or distributor for information. A distributor list can be found at www.wharfedalepro.com

*Be aware that warranty details may differ from country to country. Contact your dealer or

distributor for information.

These terms do not infringe your statutory rights.

SVP 10, SVP-12,SVP-15,SVP215 Operating: The Wharfedale Pro SVP-10, SVP-12, SVP15 and SVP-215 feature two 1/4"phone jack socket connectors and are paralleled. This means that these cabinets can be linked together with other cabinets of the same impedance and design or with a sub-bass unit. CAUTION: If you are unsure of any of thes procedures, check with your dealer or an experienced sound engineer. (1) Ensure you do not overload the amplifier you are using by linking too many units together and lowering the resistance (impedance) below the safe operating level of the amplifier.

Note: Each speaker connected in parallel increases the load on the amplifier and can add up to a total load that may exceed the amplifier's capabilities, leading to possible damage.Two 8 loudspeakers in parallel make a 4 total load. Four 8 parallel connected loudspeakers make a total load of 2, which is too low for many amplifiers. (2) Make sure that the speaker cable used is securely attached to the amplifier and the cabinet. (3) Check all cables from the source unit (mixer or other source) to the amplifier. Check all power cables to all the electronic systems powering the loudspeakers and ensure that they meet with required safety standards.

https://manual-hub.com/

SVP DIMENSIONS
SVP-10

SVP-12

SVP-15

SVP-215

SVP-15B

SVP-18B

SVP-12M

https://manual-hub.com/

References

Manual-Hub.com - Free English product PDF Documents!