Kodak Flatbed Accessory for A3/A4 Scanners

Safety

User Precautions

• Place the scanner on a sturdy, level work surface capable of supporting 5.5 kg (12 lbs.).
• Do not install the scanner in a location exposed to dust, humidity, or vapor, as this could cause electric shock or fire. Use the scanner indoors in dry locations only.
• Ensure the power outlet is within 1.52 meters (5 feet) of the scanner and easily accessible.
• Use only the power cord provided with the scanner. Using a different power cord may cause electric shock or product damage.
• Ensure the power cord is securely connected to the wall outlet. Failure to do so may cause electric shock or fire.
• Do not damage, knot, cut, or modify the power cord, as this could cause electric shock or fire.
• The scanner requires a dedicated power outlet. Do not use an extension cord or power strip to connect the scanner.
• Use only the AC adapter provided with the scanner. Do not use the scanner's AC adapter with other products.
• Leave sufficient space around the power outlet for easy disconnection in case of emergency.
• Do not use the scanner if it overheats, emits a strange odor, smoke, or makes unusual noises. Stop the scanner immediately, unplug the power cord from the outlet, and contact Kodak technical support.
• Do not disassemble or modify the scanner or AC adapter.
• Do not move the scanner with the power cord or interface cable connected, as this can damage the cables. Disconnect the power cord from the wall outlet before moving the scanner.
• Follow Kodak's recommended cleaning procedures. Do not use cleaning products applied with air, liquid, or gas sprayers, as these products only displace dust, dirt, or debris to other parts of the scanner, potentially causing malfunction.

Environmental Information

• The Kodak A4 and A3 Flatbed Accessories are designed to meet worldwide environmental requirements.
• Guidelines for the disposal of consumable items replaced during maintenance or repair are available. Comply with current regulations in your location or contact your local Kodak office for more information.
• Disposal of this material may be regulated due to environmental considerations. For information on waste disposal or recycling, contact local authorities or, in the United States, visit the Electronic Industries Alliance website: www.eiae.org.
• NOTE: This product contains mercury. Dispose of it in accordance with applicable local, state, or federal regulations.
• The product packaging is recyclable.
• Material Safety Data Sheets (MSDS) for chemical products are available on the Kodak website at: www.kodak.com/go/msds. When accessing MSDS from the website, you will be prompted to enter a keyword or catalog number for the consumable whose material safety data sheet you wish to obtain.

European Union

This symbol indicates that when the end user wishes to dispose of this product, it must be sent to an appropriate facility for recovery and recycling. Contact your local Kodak representative or visit us at www.kodak.com/go/recycle for more information on available recovery and recycling programs for this product.

Consult www.kodak.com/go/REACH for information on the presence of substances included in the candidate list according to Article 59(1) of Regulation (EC) No. 1907/2006 (REACH).

Acoustic Emissions

Maschinenlärminformationsverordnung - 3, GSGV The workplace-related emission value is <70 dB(A). [Noise Information Ordinance - 3, GSGV The noise emission level at the operating location is <70 dB(A).]

Electromagnetic Compatibility Regulations

United States

This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed or used in accordance with the instructions, may cause harmful interference to radio communications. Operation of this equipment in a residential area may cause harmful interference, in which case the user will be required to correct the interference at their own expense. Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. When shielded interface cables are supplied with the product or additional specific components or accessories that are otherwise indicated for use in the installation of the product are used, they must be used to ensure compliance with FCC regulations.

European Union

WARNING: This is a Class A product. In domestic environments, it may cause radio interference, in which case the user will need to take appropriate measures.

Japan

This product is Class A according to the voluntary control council for information technology equipment interference (VCCI) standards. If used in a domestic environment, radio frequency interference may occur. In such cases, the user will be required to take corrective action. この装置は、情報処理装置等電波障害自主規制協議会（VCCI）の基準 に基づくクラスA情報技術装置です。この装置を家庭環境で使用すると電波障害を引き起こすことがあります。この場合には使用者が適切な対策を講ず るよう要求されることがあります。

Taiwan

WARNING: This is a Class A product. In domestic environments, it may cause radio interference, in which case the user will need to take appropriate measures.

警告使用者： 這是甲類的資訊產品，在居住的環境中使用時，
可能會照造成射頻干擾，在這種情況下，使用者
會被要求採取某些適當的對策。

People's Republic of China

WARNING: This is a Class A product. In domestic environments, it may cause radio interference, in which case the user will need to take appropriate measures.

声明，该产 此为A级产品，在生活环境中品可能会造成无线电干扰。在这种情况下，可能需要 用户对其干扰采取切实可行的措施

Korea

Please note that this equipment has obtained EMC registration for commercial use. If it has been sold or purchased erroneously, exchange it for equipment certified for domestic use. 이 기기는 업무용으로 전자파적합등록을 한 기기이오니 판매자 또는 사용자는 이점을 주의하시기 바라며, 만약 잘못 판매 또는 구입하였을 때에는 가정용으로 교환하시기 바랍니다.

NOTE: If the accessory is connected to the scanner base, the system is considered Class A.

Using the Kodak A4/A3 Flatbed Accessory

Specifications

The Kodak A3 and A4 Flatbed Accessories add exceptional document scanning capability to the Kodak scanner series. Scanner models include: i2400, i2600, and i2800.

Unlocking the Flatbed

The Kodak A4 or A3 Flatbed Accessory is placed in a locked position for transport. Unlock the flatbed before installing it. The lock/unlock lever is located on the bottom of the scanner.

1. Turn the scanner upside down to locate the lock/unlock lever.
2. Move the lever to the unlock position. [unlock-symbol]

NOTE: You do not need to lock the flatbed accessory unless you need to transport it to another location.

Installing the Flatbed

Before you begin, ensure your Kodak i2400/i2600/i2800 scanner is already installed.

1. Connect the USB/power adapter to the Kodak A4 or A3 Flatbed Accessory.
2. Insert the USB cable into the USB port of the USB/power adapter, then insert the other end of the USB connector into an available USB port on the host PC (must support USB 2.0 high speed).
3. Connect the power supply to the USB/power adapter.
4. Connect the AC power cord to the power supply, and then connect the AC power cord to the wall outlet.
5. When the green LED indicator on the flatbed is solid, the accessory is ready for use.
6. Verify that the green flatbed LED is illuminated before powering on the Kodak i2400/i2600/i2800 scanner. If the scanner was powered on before the green flatbed LED was solid, you will need to power the scanner off and on again.

NOTE: If you need to remove the USB/power adapter, press the red tab to release it from its position.

LED Indicators and Start Button

Documents can be scanned using the scanner's start button or via the host PC. Pressing the flatbed start button initiates the same action as pressing the scanner's start button: it launches the selected application associated with the number displayed in the function window. Scanning multiple special documents with the flatbed will be easier using the flatbed start button to initiate scanning.

NOTE: Each time the start button is pressed, an image file will be generated.

LED Indicators: Light up or flash to indicate the scanner's status.

• Solid Green: Flatbed is ready to scan.
• Solid Red: Indicates an error.
• Flashing Green: Standby/Energy Star mode; scanning in progress/busy.
• Flashing Red: Flatbed error.

Using the Flatbed

Use the flatbed to scan documents that cannot be scanned using the automatic document feeder.

1. Open the flatbed cover.
2. Place the document face down on the glass platen.
3. Position the document so the corner aligns with the arrow. [arrow-symbol]
4. Close the flatbed cover.
5. Initiate the scanning process. You can scan the document using the scanner start button, the flatbed, or the host PC.

Cleaning the Flatbed

Dirt or fingerprints may be deposited on the scanning surface glass of the flatbed, which could cause a decrease in image quality. Use Kodak Scanner Cleaning Cloths (Catalog # 896 5519) or Kodak Brillianize Scanner Cleaning Wipes (Catalog # 826 6488) to clean the glass platen.

IMPORTANT: Staticide cleaning cloths contain isopropanol, which can cause eye irritation and skin dryness. Wash your hands thoroughly with soap and water after performing maintenance procedures. For more information, refer to the Material Safety Data Sheets (MSDS).

1. Open the flatbed cover.
2. Clean the glass platen with a Brillianize cleaning wipe (step 1) or a nearly dry Staticide wipe.
3. Dry the glass platen with a nearly dry Brillianize cleaning wipe (step 2) or Staticide wipe to remove any streaks.
4. Close the flatbed cover.

The Kodak Black Background Accessory (Catalog # 863 6870) is available for use with the Kodak A4 Flatbed Accessory. This accessory eliminates spotting when scanning both sides of a document. It can also be used to scan white documents with a defined black border for images.