Product Overview
This document details the specifications for the Laguna MCNC SSM 4'x4' CNC router, featuring a 6Hp HSD ATC spindle. The machine is designed for precision cutting and fabrication, incorporating robust construction and advanced control systems.
Machine Diagram Description
The document features technical drawings of the Laguna MCNC SSM 4'x4' CNC router. One drawing provides a top-down view of the machine's gantry and spindle assembly, indicating overall dimensions. Another drawing shows a side profile of the machine's structure. Key measurements include an overall footprint of 78 inches wide by 90 inches long, a working area of 49 inches by 49 inches, and a gantry clearance of 12 inches. A separate illustration depicts the control cabinet, measuring 28 inches by 20 inches, with visual indicators. The machine is equipped with a vacuum system interface and a dust collection port.
Specifications
| Specification | Details |
|---|---|
| DRAWN | S.B._7/1/2025_REV,1 |
| POWER REQUIREMENTS | See Below, varies on vacuum choice. |
| FOOTPRINT | 78" W X 90" L |
| WORKING AREA | 49" X 49" |
| GANTRY CLEARANCE | 12" |
| SPINDLE | 6HP HSD ATC ES950 SPINDLE |
| SPINDLE RPM | 6,000-24,000 |
| RAPID TRAVEL | 900 IPM |
| MAXIMUM CUTTING SPEED | 500 IPM |
| DUST PORT DIAMETER | 4" PORT ON DUST HOOD |
| DRIVE SYSTEM FOR X AND Y AXES | 25MM HEAVY DUTY LINEAR BEARING, ALL AXES |
| CONTROLLER | SYNTEC INDUSTRIAL CONTROLLER |
| SOLID STATE HOME SWITCH'S | NPN PROXIMITY SWITCHES |
| HEAVY DUTY WELDMENT TUBULAR FRAME | 3000 POUNDS |
| CENTRALIZED LUBRICATION SYSTEM FOR ALL AXES | 30W SAE OIL IS PIPED TO ALL BEARINGS. |
| VACUUM TABLE | 4 ZONES |
| DUST COLLECTION REQUIRED | 3HP Cyclone Minimum 2800 CFM |
Vacuum Options
| Vacuum Unit | Power / Electrical Requirements |
|---|---|
| 1 pcs, 10hp stock regen vacuum, 3 phase | 220v, 3 Phase, 50 amps | 1 PH w/ 15hp VFD, 60A |
| 1 pcs, 10hp Becker SV400 vacuum, 3 phase | 220v, 3 Phase, 50 amps | 1 PH w/ 15hp VFD, 60A |
| 1 pcs, Hurricane Vacuum System, 1 phase | 220v, 1 Phase, 60 amps | Single Phase |
| 1 pcs, 8.6hp Becker Vane vacuum, 3 Phase | 220v, 1 Phase, 90 amps | 1 PH, with 20hp VFD |
| 1 pcs, 8.6hp Becker Vane vacuum, 3 Phase | 220v, 3 Phase, 60 amps | 3 Phase |
| 1 pcs, 12hp Becker Vane vacuum, 3 Phase | Remote starter needed, 220v,3ph,45 amps. Optional, 480v,3ph,30 amps. CNC Motion 220v, 3 phase, 30 amps |
