JANOME BULLETIN
Optional Embroidery Hoops
Part No. [819-401-007]
[819-402-008]
[819-403-009]
Three sizes of optional embroidery hoops are available to enhance your embroidery experience.
- Two hoops designed for free-arm embroidery.
- One hoop in the popular and user-friendly 100 x 100 mm size.
These optional hoops provide greater flexibility and convenience for a wide range of embroidery projects.
For: Memory Craft 1000, Memory Craft 100E.
[Description of initial image: Images of several Janome embroidery hoops, including free-arm types and a standard square hoop, attached to embroidery machine frames. A simplified line drawing of a Janome embroidery machine is also present.]
Point 01: Two Free-Arm Hoops
Some items have been considered "impossible" to embroider on most home embroidery machines, such as baby onesies, jacket cuffs, pant legs, or tubular projects. Traditionally, this required wasting time opening seams to lay the item flat and then closing them up again. The optional free-arm embroidery hoops are a game changer. By allowing the garment to slide around the free-arm, you can easily embroider in most tight spaces or on finished projects.
FA10e hoop
Dimensions: 4.0 x 1.6 inch (100mm horizontal x 40mm vertical)
Part No. 819-402-008
[Description of FA10e hoop image: The FA10e embroidery hoop is shown, with dimensions indicated as 100mm horizontally and 40mm vertically. The hoop itself features grid lines for precise placement.]
FA5e hoop
Dimensions: 2.0 x 2.0 inch (50mm x 50mm)
Part No. 819-403-009
[Description of FA5e hoop image: The FA5e embroidery hoop is displayed, with dimensions marked as 50mm by 50mm. The hoop includes grid lines.]
Embroidery Examples
[Description of embroidery examples images: A close-up view of an embroidery machine needle stitching the word 'LITTLE' onto fabric. A child wearing a t-shirt with 'BIG Brother' embroidered on it. A fabric swatch with a teddy bear design embroidered, labeled 'FA5e: 50 x 50 mm'. A child wearing a pink t-shirt with a small bear embroidery on the chest.]
Point 02: User-Friendly Size 100 x 100mm Hoop
Hooping fabric can be a challenge, but not with the new Easy Hoop Tightening System! Center your fabric and insert the inner hoop with the lever fully released. Push the lever about halfway to tighten the hoop enough to make final adjustments, and push the rest of the way to tighten fully.
SQ10e hoop
Dimensions: 4.0 x 4.0 inch (100mm x 100mm)
Part No. 819-401-007
[Description of SQ10e hoop image: The SQ10e embroidery hoop is pictured, measuring 100mm by 100mm. It features grid lines for alignment and the 'Easy Hoop Tightening System' with a visible lever mechanism.]
Tips
Check our YouTube channel! You can see tips for JANOME free-arm embroidery.
