Instruction Manual for LazeYard models including: HO-S-001 Rotating Bookshelf, HO-S-001, Rotating Bookshelf, Bookshelf
LAZEYARD Rotating Bookshelf, Rotating Bookshelf Tower for Small Space, 360 Display 4 Tier Floor Standing Storage Rack, Wood Narrow Book Shelf for Bedroom, Living Room : Home & Kitchen
: 105g : 210x148.5mm : : 148.50 mm LazeYard Decorate the most beautiful home in the simplest way Rotating Bookshelf Instruction Manual < Rotating Bookshelf Decorate the most beautiful home in the simplest way LazeYard Model: HO-S-001 210.00 mm Hanchan sans Light 12.4MM 11.5MM 4.2MM 12MM 12MM Hello, thank you for purchasing LazeYard rotary bookshelf. Please read this user manual carefully and keep it properly for future reference If you need any help, please contact the store and provide your Amazon order number. NOTE Please carefully check whether the accessories and plates are complete and intact after receiving the products. Please refer to the accessories table for details. During the installation, please follow the instructions to avoid hole bursting caused by repeated installation. The plate is marked with a number. Please install the number corresponding to the plate in the instruction manual.. Model: HO-S-001 After-sales e-mail: Support@lazeyard.com Manufacturer Name: SHENZHEN YONGCHUANGCHENG TECHNOLOGY CO., LTD. Address: 6F, MAOCHENG BLDG, XICHENG INDUSTRIAL AREA, XIXIANG, BAO'AN DIST, SHENZHEN, CHINA, 518126 Made in China 01 14 STEP17 Stick the screw hole with C sticker to obtain a complete and beautiful product. ASSEMBLY PARTS LIST PlATE 1 1 plate 2 plate 3 Shelf baffle 4 Circular plate 4PCS 5 Circular plate 4PCS 6 Circular plate 16PCS 77 Circular plate 1pcs 8 Circular plate 1pcs 1pcs GUARANTEE We offers a 90-day warranty that begins on the date of the original purchase and applies to problems caused by the manufacturer. For questions, assistance, or support, please contact the Customer Service by e-mail to Support@lazeyard.com with your order number and details. We will send you further information about the solution. 2pcs Parts 1pcs Rotating component1pcs Non-slip mat4PCS Screwdriver1PCS 13 02 Product Structure Diagram 03 STEP16 Install G non-slip mat on plate 12 STEP14 Connect the four corners of F Rotating component to plate with E screw Installation steps STEP1 Connect plate and plate together STEP15 Connect. plate withplate of STEP13, and align the locking screws by rotatingplate to the hole position STEP2 Put B eccentric wheel into the hole of andplate, then drill A screw into plate, and connect B eccentric wheel with its head and lock eccentric wheel STEP3 Connect plate to the upper part of STEP2 with D screw,Put D screw on the upper right corner STEP13 Install the baffle of bookshelf into this layer, and repeatedly install the baffle of 4 sides STEP4 Install the baffle of bookshelf into this layer, and repeatedly install D Screw on the the upper right corner of 4 sides baffle 11 04 05 10 STEP11 Connect plate and plate, and connect them into through STEP2 STEP5 Connect plate and plate, and connect them into plate through STEP2 STEP12 Connect plate with D screw in STEP 11 STEP6 Connect plate to STEP5 with D screw 09 06 STEP7 Install the baffle of bookshelf into this layer, and repeatedly install the baffle of 4 sides STEP9 Connect plate to STEP8 with D screw STEP8 Connect plate and plate, and connect them to plate through STEP2 STEP10 Install the baffle of bookshelf into this layer, and repeatedly install the baffle of 4 sides 07 08CorelDRAW X7 iLovePDF