User Guide for KRAMER models including: KRAMER, KT-1010, KT-1010RB
Feature. Function. 1. Volume setup button ( /-). Press to increase/decrease KT-1010/KT-1010RB speaker volume. 2. Up/Down (△/▽) Keys.
2021-05-16 — Feature. Function. 1. Volume setup button ( /-). Press to increase/decrease KT-1010/KT-1010RB speaker volume. 2. Up/Down (△/▽) Keys.
Buy KT-1010 10" портативная сенсорная панель для использования с ПО Kramer KronoMeet | SNK-S | ProAV Distributor
Scan for full manual KT-1010 / KT-1010RB Quick Start Guide This guide helps you install and use your KT-1010 / KT-1010RB for the first time. Go to www.kramerav.com/downloads/KT-1010 or www.kramerav.com/downloads/KT-1010RB to download the latest user manual and check if firmware upgrades are available. Step 1: Check what's in the box KT-1010 Touch Panel or KT-1010RB Touch Panel (Reduced Bandwidth) Tabletop mount 12V AC/DC power adapter On-wall mount bracket kit Panel mount bracket Installation screws 1 Quick start guide 1 Allen key Step 2: Get to know your KT-1010 / KT-1010RB # Feature Function 1 Volume setup button (+/-) 2 Up/Down (/) Keys Press to increase/decrease KT-1010/KT-1010RB speaker volume. Press to scroll through the menu options. 3 Exit Button Press to exit the menu. 4 SD Card Slot and Cover Add an external memory. 5 Power LED Power on indication. Orange when loading, then turns green. 6 3 Add-on USB Module Slots For future use. 7 2 Speakers To output the sound. 8 4 VESA Mounting Screw Holes (75x75mm) Connect to a VESA kit to mount on the wall. 9 12V DC Input with Cable Security Lock Connect to the AC/DC adapter and to the mains. 10 Ethernet PoE RJ-45 Connector Connect to a PC via a LAN. 11 USB Type A Port Connect to USB peripherals (such as a keyboard, printer, etc.). 12 Micro USB Port Connect to USB peripherals (such as a keyboard, printer, etc.). 13 2 Control I/O Ports For future use. 14 Power ON/OFF Switch Press to turn power on or off. 15 Headphone 3.5mm Mini Jack Connect to a headphone. 16 Camera For video conferencing. 17 Microphone For video conferencing or audio recording. KT-1010, KT-1010RB Quick Start P/N: 2 9 0 0 - 3 0 1 4 2 8 QS Rev: 7 Step 3: Mount KT-1010 / KT-1010RB This section describes KT-1010 but applies also to KT-1010RB. To mount KT-1010 on a wall using the VESA kit: 1. Unscrew the 2 security screws and separate the wall mounting brackets. Keep screws and rubber washers for later. 2. Secure the on-wall mount to the wall using 2 installation screws and washers (use the built-in level for levelling). 3. Attach the panel mount bracket to the VESA mounting holes on the rear side of the KT-1010 (safety screw openings on top). 4. Slide the panel mount bracket to the on-wall bracket already mounted on the wall. 5. Replace security screws with rubber washers. To mount KT-1010 on a table: 1. Remove the two panel screws on the rear lower-side panel of the tabletop mount. 2. Pass the cables through the opening on the rear side. 3. Connect the cables to KT-1010. 4. Turn the power switch on the rear of the touch panel (14) to ON. 5. Place KT-1010 into the tabletop mount. 6. Reconnect the lower-side panel using the two panel screws. 7. Secure KT-1010 from the rear side, via the Tabletop Mount holes, to the VESA mounting holes on the rear side of the KT-1010. If required, lock the device using the Kensington lock slot on the right lower side of the table-mount top. · Ensure that the environment (e.g., maximum ambient temperature & air flow) is compatible for the device. · Avoid uneven mechanical loading. · Appropriate consideration of equipment nameplate ratings should be used for avoiding overloading of the circuits. · Reliable earthing of rack-mounted equipment should be maintained. · Maximum mounting height for the device is 2 meters. Step 4: Connect power Connect the Ethernet port to a PoE Ethernet port, using a PoE-compliant Ethernet cable. Alternatively, or in addition to PoE powering, connect the power adapter to the 12V AC/DC power socket and to the mains electricity. Safety Instructions (See www.kramerav.com for updated safety information). Caution: · There are no operator serviceable parts inside the unit. Warning: · Use only the power cord that is supplied with the unit. · Disconnect the power and unplug the unit from the wall before installing. Step 5: Operate KT-1010 / KT-1010RB 1. Turn the power switch on the rear of the touch panel to ON. Wait for Kramer Control log-in page to load. 2. Sign in as follows: If the device is connected to the Internet via cable, click SIGN IN on the panel. If the device is connected to the Internet via Wi-Fi: Press the Exit button (on the KT-1010/KT-1010RB top side) and then type the password (default: Kramer). Click Home Page>Settings>Wi-Fi and choose your SSID Network. Reboot your device. KramerAppUpdate automatically updates Kramer apps. Tap Home-Page>App Icon>KramerAppUpdate to view installed and available app versions and to change the Server Check Interval. 3. Operate the Kramer Control App.Microsoft Word for Microsoft 365