User Manual for YJBCO models including: V2-L, Dual Color LED Controller, V2-L Dual Color LED Controller
LEDlife rWave CCT controller - Push-dim, 12V (96W), 24V (192W), avlasting i begge ender - LEDLyskilder.no
LEDlife rWave CCT controller - Push-dim, 12V (96W), 24V (192W), aflasting i begge ender
LEDlife rWave CCT controller - Push-dim, 12V (96W), 24V (192W), avlastning i båda ändar - LEDMegaStore.se
Dual Color LED Controller Model No.: V2-L 2 Channel/Step-less dimming/Wireless remote control/Auto-transmitting/Synchronize/Push Dim/Multiple protection Feature 4096 levels 0-100% dimming smoothly without any flash. LVD RED Match with all RF 2.4G single zone or multiple zone dual color or single color remote control. One RF controller accept up to 10 remote control. Auto-transmitting function: Controller automatically transmit signal to another controller with 30m control distance. Synchronize on multiple number of controllers. Fade in and out effect selectable. 3 levels color temperature (WW, NW and CW) selectable by continuous power off and on operation. Connect with external push switch to achieve on/off and 0-100% dimming function. Over-load / Short circuit protection, recover automatically. Technical Parameters Input and Output Input voltage Input current Output voltage Output current Output power Output type 12-48VDC 16.5A 2x(12-48)VDC 2CH,8A/CH 2x(96-384)W Constant voltage Environment Operation temperature Case temperature (Max.) IP rating Ta: -30 OC ~ +55 OC T c: +85OC IP20 Warranty and Protection Warranty 5 years Protection Reverse Polarity Over-load Short circuit User Manual Ver 1.1.1 Dimming data Input signal Control distance Dimming gray scale Dimming range Dimming curve PWM Frequency RF 2.4GHz + Push Dim 30m(Barrier-free space) 4096 (2^12) levels 0 -100% Linear 2KHz (default) Safety and EMC EMC standard (EMC) Safety standard(LVD) Radio Equipment(RED) Certification Weight Net weight Gross weight ETSI EN 301 489-1 V2.2.3 ETSI EN 301 489-17 V3.2.4 EN 62368-1:2020+A11:2020 ETSI EN 300 328 V2.2.2 CE,EMC,LVD,RED 0.107Kg 0.126Kg - + - V2-L Dual Color LED Controller Mechanical Structures and Installations Push switch Push switch common CW 2 OUTPUT + + Installation rack WW 1 + IN PUT 12-48VDC Match key MAT CH + LED indicator 45mm 175mm 160mm 27mm Cool white LED LED output + Warm white LED LED output + Installation rack Power input Power input + Wiring Diagram Push Switch Push Dim: Click Long press(>1s) from OFF Long press(>1s) from ON ON/OFF Color temperature UP/DOWN (turn off and turn on to return dimming) Dimming UP/DOWN CW 2 OUTPUT + + V2-L 1 WW + IN PUT 12-48VDC MAT CH + CW WW Dual color LED strip AC100-240V Power Supply 12-48VDC Constant Voltage CCT Remote Note: Continuously switch off and on the power supply two times rapidly, It will change 3 levels color temperature (WW, NW and CW) in sequence. Page 1 Match Remote Control (two match ways) End user can choose the suitable match/delete ways. Two options are offered for selection: Use the controller's Match key Use Power Restart Match: Short press match key, immediately press on/off key (single zone remote) or zone key (multiple zone remote) of the remote. The LED indicator fast flash a few times means match is successful. Delete: Press and hold match key for 5s to delete all match, The LED indicator fast flash a few times means all matched remotes were deleted. Match: Switch off the power, then switch on power, repeat again. Immediately short press on/off key (single zone remote) or zone key (multiple zone remote) 3 times on the remote. The light blinks 3 times means match is successful. .Delete: Switch off the power, then switch on power, repeat again. Immediately short press on/off key (single zone remote) or zone key (multiple zone remote) 5 times on the remote. The light blinks 5 times means all matched remotes were deleted. Application notes 1. All the receivers in the same zone. 30m 30m 30m RF remote Auto-transmitting: One receiver can transmit the signals from the remote to another receiver within 30m, as long as there is a receiver within 30m, the remote control distance can be extended. Auto-synchronization: Multiple receivers within 30m distance can work synchronously when they are controlled by the same remote. Receiver placement may offer up to 30m communication distance. Metals and other metal materials will reduce the range. Strong signal sources such as WiFi routers and microwave ovens will affect the range. We recommend for indoor applications that receiver placements should be no further apart than15m. 2. Each receiver(one or more) in a different zone, like zone 1, 2, 3 or 4. Zone 1 Zone 2 30m 30m Zone 3 Zone 4 RF remote User Manual Ver 1.1.1 V2-L Dual Color LED Controller Push Dim with Synchronization The provided Push-Dim interface allows for a simple dimming method using commercially available non-latching (momentary) wall switchs. If more than one controller are connected to the same push switch, do a long press for more than 10s, then the system is synchronized and all lights in the group dim up to 100%. This means there is no need for any additional synchrony wire in larger installations. We recommend the number of controllers connected to a push switch does not exceed 25 pieces, The maximum length of the wires from push to controller should be no more than 20 meters. Dual color control WW=Warm white LED CW=Cool white LED Each channel can supply up to 192W(@24V) and white balance can be controlled as such: Color temperature Power distribution Cool white WW=0W,CW=192W Neutral white WW=96W,CW=96W Warm white WW=192W,CW=0W Linear dual color tuning Warm white(Min. 2700K) Neutral white(4000K) Cool white(Max. 6500K) Recommended CCT range PPW WMM dduuttyy((%%)) Dimming curve 110000 9900 8800 7700 6600 5500 4400 3300 2200 1100 Gamma=1.0 10 20 30 40 50 60 70 80 90 100 Brightness(%) Fade in and Fade out Setting Long press match key 5s, then short press match key 3 times, The lighting effect will be set to the fade in and fade out in 3s, the indicator light of LED controller blinks 3 times. Long press match key 10s, restore factory default parameter, the light on/off time restores to 0.5s. Page 2Corel PDF Engine Version 16.1.0.843 CorelDRAW X6