SmartBright LED Batten BN013C
Mounting Instruction
Product Specifications:
| Product Type | Dimension (mm) | CCT (K) | Lumen Output (lm) | Power (W) | Energy Efficiency Class | Weight (kg) |
|---|---|---|---|---|---|---|
| BN013C LED20/WW L1200 AU G3 | 1186×28.4×35.7 | 3000 | 1900 | 20 | E | 0.17 |
| BN013C LED20/NW L1200 AU G3 | 1186×28.4×35.7 | 4000 | 2000 | 20 | D | 0.17 |
| BN013C LED20/CW L1200 AU G3 | 1186×28.4×35.7 | 6500 | 2000 | 20 | D | 0.17 |
| BN013C LED10/WW L600 AU G3 | 586×28.4×35.7 | 3000 | 950 | 10 | E | 0.09 |
| BN013C LED10/NW L600 AU G3 | 586×28.4×35.7 | 4000 | 1000 | 10 | D | 0.09 |
| BN013C LED10/CW L600 AU G3 | 586×28.4×35.7 | 6500 | 1000 | 10 | D | 0.09 |
Certifications: AS/NZS 60598, IP20, CE
Electrical Information: 220V-240V, 50Hz/60Hz
Operating Temperature: Up to 25°C
Inrush Current:
- 20W: 14.3A, 1 μs
- 10W: 9A, 1 μs
Dimensions:
- L600: 586 mm
- L1200: 1186 mm
Surface Mounting
Installation on ceiling or wall through mounting clips.
Mounting Distance:
Ensure mounting points are spaced appropriately, with distances greater than 50mm from edges and greater than 250mm between mounting points for L1200, and greater than 50mm from edges and greater than 50mm between mounting points for L600.
Trunking Methods
Trunking method A: Click fit male plug into female socket. Affix next system only after linking. Maximum amount of linking: 10pcs.
Trunking method B: Use connector jack cable (not provided) for linking. Maximum amount of linking: 10pcs. L-Linkable cable: ZCH086 L265.
Wire Connection
Use a 2-pin plug* for power connection. *2-pin plug is not provided. Power cable: ZCH086 L1200.
Important Safety Information
- For indoor use only.
- Do not switch on before complete installation.
- Installation must be performed by a licensed electrician in accordance with Australian wiring rules.
- The external flexible cable or cord of this luminaire cannot be replaced; if the cord is damaged, the luminaire shall be destroyed.
- The light source of this luminaire is not replaceable; when the light source reaches its end of life, the whole luminaire shall be replaced.
- Luminaire must not be used or stored in corrosive environments where hazardous materials such as Sulphur, Chlorine, or Phthalates are present.
- This product allows a maximum of 10 pcs trunking (via connector or end-to-end trunking). For your safety, the connection of BN013C with any other product is prohibited. Ensure the last male socket remains open.
- Maximum current of power cable: 2A.
Disposal Information: This marking indicates that this product should not be disposed of with other household wastes throughout the EU. To prevent possible harm to the environment or human health from uncontrolled waste disposal, recycle it responsibly to promote the sustainable reuse of material resources. To return your used device, please use the return and collection systems or contact the retailer where the product was purchased. They can take this product for environmentally safe recycling.
