Instruction Manual for KarliK models including: DWP-1, DWP-2, DWP-3, DWP-3.1, DWP-4, DWP-5, DWP-6, DWP-6.1, DWP-9, DWP-10.1, DWP-10.11, DWP-4.1, DWP-44.1, DWPUS-1, DWPUS-2, DWPUS-3, DWPUS-3.1, DWPUS-4, DWPUS-5, DWPUS-6, DWPUS-6.1, DWPUS-9, DWPUS-10.1, DWPUS-10.11, DWPUS-4.1, DWPUS-44.1, Deco Series Illuminating Module LED for Switches, Deco Series, Illuminating Module LED for Switches

Karlik DECO L-1 - L-2 EN

Kamila Karlik

• Google Docs
• Google Drive
• Download [pdf]
• Download Optimized



File Info : application/pdf, 1 Pages, 1.51MB

Document Document

ASSEMBLY MANUAL ILLUMINATING MODULE LED FOR SWITCHES OF DECO SERIES
Characteristics of the module Illuminating module LED is intended for installation by the customer himself in switches of DECO series of the following types: DWP-1, DWP-2, DWP-3, DWP-3.1, DWP-4, DWP-5, DWP-6, DWP-6.1, DWP-9, DWP-10.1, DWP-10.11, DWP-4.1, DWP-44.1, DWPUS-1, DWPUS-2, DWPUS-3, DWPUS-3.1, DWPUS-4, DWPUS-5, DWPUS-6, DWPUS-6.1, DWPUS-9, DWPUS-10.1, DWPUS-10.11, DWPUS-4.1, DWPUS-44.1 and their colour variants. Note! Do not use with switches of the following types: DWP-7, DWP-8, DWP-8.1, DWP-44.2, DWP-66, DWP-66.1, DWP-88, DWP-88.1, DWP-33, DWP-33.1, DWP-10.2, DWP-10.21, DWPUS-8, DWPUS-44.2, DWPUS-33, DWPUS-33.1, DWPUS-10.2, DWPUS-10.21. Way of connection Illuminating module LED shall be set parallelly in a slot in the switch box (according to the picture). Next, prior to installation of button/buttons, the external frame shall be installed or the American-style connector part. Note! Assembly shall be held by a suitably qualified person with deactivated voltage and shall meet the national safety standards. The way of setting is presented on the schema below
Colours available for the illuminating module LED
from left: white, blue, green, red
1 I 1