Instruction Manual for Razor models including: W15110710048 Vector Motor-Rear Wheel, W15110710048, Vector Motor-Rear Wheel, Motor-Rear Wheel, Wheel
Vector - Support - Razor
File Info : application/pdf, 2 Pages, 711.68KB
DocumentDocumentRequired Tools: (Not included) A. Phillips screwdriver B. Two (2) 19 mm wrenches VECTOR MOTOR-REAR WHEEL REPLACEMENT PROCEDURES PART # W15110710048 WARNING CAUTION: To avoid potential shock or other injury, turn power switch OFF and disconnect charger before conducting any assembly or maintenance procedures. Failure to follow these steps in the correct order may cause irreparable damage. Step 1 Using a Phillips screwdriver, remove two (2) screws from the battery cover on the right side of the unit. Step 2 Locate and disconnect the motor connectors from the controller. Need Help? Visit our website at www.razor.com or call toll-free at 866-467-2967 Monday - Friday 8:00am - 5:00pm Pacific Time. 1 Step 3 Using two (2) 19 mm wrenches, loosen the lock nuts from the rear axle and slide the wheel down. Step 4 Cut the zip-tie that holds the motor cable onto the frame and slide the cable out from the frame. Step 5 Reverse the steps. ATTENTION: Charge battery 8 hours before using. Need Help? Visit our website at www.razor.com or call toll-free at 866-467-2967 Monday - Friday 8:00am - 5:00pm Pacific Time. 2