Owner's Manual for OMNE SLEEP models including: OS1, Black Queen Adjustable Bed Base, Queen Adjustable Bed Base, Adjustable Bed Base, OS1, Bed Base
OMNE SLEEP OS1QN 810104951173 0810104951173 1008431501
OMNE SLEEP OS1FL 810104951166 0810104951166 1008431496
OMNE SLEEP OS1TW 810104951142 0810104951142 1008512798
OS1 OWNER'S MANUAL Installation & Operation Table of Contents Parts List .............................................................................................................. 01 Unpacking Your Base .................................................................................... 02 Attaching Legs To Base ................................................................................ 03 Insert The Cords and Retainer Bar ......................................................... 04 Remote Control Instruction ...................................................................... 05 Trouble shooting ............................................................................................. 06 Safety & Warranty Warnings .................................................................... 07 Parts List All electronics and components that need to be installed are located in boxes under the foundation or attached to the frame. Before discarding the packing materials, ensure that all the parts are accounted for. ·,.i-1611-i+ DD (1) Retainer Bar Unpacking Your Base Unpacking Your Base 1. Open the carton box. Lay out the adjustable base flat on the ground 2. Open all the parts boxes and cut the zip ties as shown Accessories Box -01- -02- Attaching Legs To Base Insert the cords and retainer Bar Legs attached Attaching Legs To Base Locate the box containing 6 bed legs, tighten the 6 legs as shown. Cords attached Insert the cords and retainer Bar 1. Please insert the cords properly as shown. 2. Flip over the base, insert the retainer bar as shown. -03- -04- Safety & Warranty Warnings READ THE FOLLOWING INFORMATION CAREFULLY BEFORE USING THIS PRODUCT If unable to understand warnings, cautio ns, and/or instructions, contact the dealer or technical personnel if applicable, before attempting to use the equipment. Otherwise, injury or damage may result. SAFETY WARNINGS: · Do not use bed outdoors. · Do not use bed near explosives. · Using bed with oxygen administering equipment other than the nasal masked type creates a possible fire hazard. · When using nasal or masked type administering equipment, route and secure oxygen or air tubing properly to ensure that tubing does not become entangled or damaged during normal operation of the bed. · Use caution when having liquids in or around the bed to ensure no spilling occurs. In case of spillage, stand in a dry, clean area of the floor and unplug the bed immediately. Clean up spill and allow the area around bed to dry thoroughly before using the electric controls again. Do not eat or drink hot liquids while operating the bed. · This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instructions concerning use of the appliance by a person responsible for their safety. · Do not allow children or individuals with disabilities to operate the bed without adult supervision. · Do not allow any person or pet under the bed at any time. · During bed operation, make sure body is positioned within the confines of the bed. Do not place extremities over the sides of the bedwhen operating bed functions. WARRANTY WARNINGS: Do not open or tamper with control box, motors, or remote (with the exception of battery compartments). The warranty will be void if the internal workings of these components are tampered with. Product Rating: The motors are not designed to operate continuously for more than [2] minutes in an [18] minutes time period or approximately 10% duty cycle. Attempting to circumvent or exceed this rating will shorten the life expectancy of the foundation and may void the warranty. Operating Information: · After power foundation assembly is completed, operate remote control to ensure proper functions. · Keep moving parts free of obstruction during bed operation (including sheets, clothing, tubing, wiring, and products using electric power cords). · Distribute body weight evenly over bed surface. Do not place entire weight on head or foot sections of the bed, during repositioning and entering or exiting bed. Hospital Use Disclaimer: This power foundation is designed for residential use only. It is not approved for hospital use and does not comply with hospital standards. Weight Limits: This product is not rated to support weights in excess of 650 pounds inclusive of the mattress and bedding. The bed will structurally support this weight, provided it is evenly distributed across the foundation. The power foundation is not designed to support or lift this amount in the head or foot sections alone. Exceeding this weight restriction could damage the bed and/or cause injury and will void the warranty. AwARNING DO NOTUSETHISBED IFWEIGHT LIMrrATION IS EXCEEDED RADIO FREQUENCY: 2.4 GHz FCC COMPLIANCE: This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. To comply with the FCC RF exposure requirements, no change to the antenna or the device is permitted. Any change to the antenna or the device could result in the device exceeding the RF exposure requirement and void user's right to operate the device. -07- Safety & Warranty Warnings 1 Ye ar Parts O nly Warr a nty -08-Adobe Photoshop for Windows -- Image Conversion Plug-in