Hama Children's Alarm Clock
Safety Notes
The product is intended for private, non-commercial use only.
- Protect the product from dirt, moisture, and overheating; use only in a dry environment.
- Do not use the product in areas where electronic devices are prohibited.
- Do not drop the product or expose it to major shocks.
- Do not attempt to service or repair the product yourself. Leave all service work to qualified experts.
- Do not modify the product in any way, as this voids the warranty.
- Keep packaging material out of reach of children due to the risk of suffocation.
- Dispose of packaging material immediately according to locally applicable regulations.
- Use the product for its intended purpose only.
- Do not use the product near heaters, other heat sources, or in direct sunlight.
Warning - Batteries
- When inserting batteries, note the correct polarity (+ and - markings) and insert accordingly. Failure to do so could result in leaking or exploding batteries.
- Only use batteries (or rechargeable batteries) of the specified type.
- Clean battery contacts and the product's polar contacts before inserting batteries.
- Do not allow children to change batteries without supervision.
- Do not mix old and new batteries, or batteries of different types or makes.
- Remove batteries from products not being used for an extended period, unless they are being kept ready for an emergency.
- Do not short-circuit batteries.
- Do not charge batteries.
- Do not throw batteries into a fire.
- Keep batteries out of the reach of children.
- Never open, damage, swallow, or allow batteries to enter the environment, as they can contain toxic, environmentally harmful heavy metals.
- Immediately remove and dispose of dead batteries from the product.
- Avoid storing, charging, or using the device in extreme temperatures and extremely low atmospheric pressure (e.g., at high altitudes).
Startup and Operation
Open the battery compartment, insert one AA battery ensuring correct polarity, and close the compartment. The clock is now ready for operation.
Setting the Time
Turn the hour/minute setting wheel clockwise. To set the seconds, remove the battery to stop the seconds hand, then reinsert the battery to start it at the correct second.
Setting the Alarm
Use the setting wheel on the back of the alarm clock. Turn it in the direction of the arrow ➡️ to set the desired alarm time. The alarm time hand moves counter-clockwise.
Move the slide switch to the ON or OFF position to activate/deactivate the alarm.
Note: The time display remains accurate within a few minutes for about a year. If sudden changes occur in the time display, replace the battery.
Technical Data
Power supply: 1.5 V, 1 x AA battery
Recycling Information
Note on Environmental Protection:
In accordance with European Directives 2012/19/EU and 2006/66/EU, electric and electronic devices as well as batteries must not be disposed of with household waste. Consumers are legally obliged to return electrical and electronic devices and batteries at the end of their service life to designated public collection points or points of sale. This symbol (crossed-out bin) on the product, manual, or packaging indicates this regulation. By recycling, reusing materials, or otherwise utilizing old devices/batteries, you make an important contribution to protecting our environment.








