wiltec 63229 Pool Cleaning Robot Instruction Manual

Instruction Manual for wiltec models including: 63229 Pool Cleaning Robot, 63229, Pool Cleaning Robot, Cleaning Robot, Robot, Naia HJ1009

Bedienungsanleitung

Instruction Manual Pool Cleaning Robot Naia HJ1009

Manual for Cleaning Robot Type Naia HJ1009, Automatic Pool Robot up to 150 m² Surface, Floor Vacuum Cleaner 15m³/h

Cleaning Robot Type Naia HJ1009, Automatic Pool Robot up to 150 m² Surface, Floor Vacuum Cleaner 15m³/h | 63229

[PDF] Instruction Manual Pool Cleaning Robot Naia HJ1009 - WilTec

No hard objects must touch the casing of the robot to avoid damage. Page 4. © by WilTec Wildanger Technik GmbH. Item 63229. Page 4 http ...

File Info : application/pdf, 16 Pages, 1.69MB

63229-doc-en

Instruction Manual Pool Cleaning Robot
Naia HJ1009
63229
Illustration similar, may vary depending on model Please read and follow the operating instructions and safety information prior to initial operation. Technical changes reserved! Illustrations, functional steps, and technical data may deviate insignificantly due to continuous further developments.

The information contained in this document may alter at any time without prior notice. No part of this document may be copied or otherwise duplicated without prior written consent. All rights reserved. WilTec Wildanger Technik GmbH cannot be held liable for any possible mistakes in this operating manual, nor in the diagrams and illustrations shown. Although WilTec Wildanger Technik GmbH has made every possible effort to ensure that this operating manual is complete, accurate, and up-to-date, errors cannot be ruled out entirely. If you have found an error or wish to suggest an improvement, we look forward to hearing from you. Send us an e-mail to:
service@wiltec.info
or use our contact form:
https://www.wiltec.de/contacts/
The most recent version of this manual in several languages can be found in our online shop:
https://www.wiltec.de/docsearch
Our postal address is:
WilTec Wildanger Technik GmbH Königsbenden 12 52249 Eschweiler Germany
Do you wish to collect your goods? Our address for collection is:
WilTec Wildanger Technik GmbH Königsbenden 28 52249 Eschweiler Germany
In order to shorten the waiting time and to allow for an easy on-site processing, we kindly ask you to contact us briefly beforehand or to place your order via the webshop.
E-mail: service@wiltec.info Phone: +49 2403 55592-0 Fax: +49 2403 55592-15
To return your goods for exchange, repair, or other purposes, please use the following address. Attention! To allow for a trouble-free complaint or return, it is important to contact our customer service team before returning your goods.
Retourenabteilung WilTec Wildanger Technik GmbH Königsbenden 28 52249 Eschweiler Germany
E-mail: service@wiltec.info Phone: +49 2403 55592-0 Fax: (+49 2403 55592-15)

Item 63229

Page 2 01 2022-1

Introduction
Thank you for choosing to purchase this quality product. To minimise the risk of injury, we ask you to always take some basic safety precautions when using this product. Please read this operating manual carefully and make sure that you understand it. Keep these operation instructions in a safe place.
Safety instructions
· This model is especially suitable for pools with flat floor; follow the corresponding instructions in this manual if your pool has a sloped floor.
· To avoid serious damage to your robot, never switch the device on when it is not in the pool. · The power cable must be connected to an appropriate earthed socket. Only operate the device
with a residual current protective device with a triggering amperage of max. 30 mA. · Do not operate the robot while persons are in the pool. · Do not try to move the floating bodies alongside the power cable. Always leave them at their
initial positions. · Before switching the device on, make sure that the cable is completely unrolled to avoid any
rolling-up of the cable which would impair the efficiency of the robot or damage it. · The filter bag must be cleaned before or after each use. This avoids that contaminations of the
filter bag impair the normal operation if the robot. · When not in use, the robot must be stored in a cool and well-ventilated place and not in direct
sunlight. · The power-supply unit must be place in a shadowy place. To avoid any overheating and possi-
ble consequential damage of components, never cover the power-supply unit. · The robot and motor unit should only be opened and/or repaired by qualified persons. · To avoid any accidents or damages, the power-supply unit should be placed at a min. distance
of 3.5 m from the edge of the pool. · Do not use the device in other working conditions than those stated in this manual. Only use
the device according to the intended use defined in this manual. · Do not remove the protective film of the control panel. · Close the pool filter system when you use the robot.
Other instructions
· Placing the robot in the pool and removing it from the pool should be so that the wheels of the robot point towards the walls to avoid that the surface of the pool be scratched.

· Store the cleaning robot on a flat surface. No hard objects must touch the casing of the robot to avoid damage.

Item 63229

Page 3 01 2022-1

· Do not apply excessive force on the filter unit by squeezing or seizing it when you mount or unmount it to avoid that the casing be damaged.
· Do not lift both sides of the filter unit at the same time.

Item 63229

Page 4 01 2022-1

Assembly and installation

Item 63229

Page 5 01 2022-1

Technical specifications

Nominal intake voltage (V) Nominal intake frequency () Output voltage (V) Operational cycle (h) Length of cable (m) Max. cleaning surface () Filter capacity (/h) Filter ability (µm) Operational water temperature () Speed (m/min)
Cleaning robot Protection class
Power-supply unit Working temperature () Pool depth (m) Max. inclination/slope (°)

220 50 24 (DC) 1 / 1.5 / 2 / 2.5 12 150 15 150 1035 1518 IP68 IPX4 1040 2.5 25

Operation
Cable connection
Plug the cable into the socket of the power-supply unit (Attention! Make sure that the plug is correctly oriented!) and screw both nuts on either side of the plug to tighten them.

Then plug in the plug to the mains.
© by WilTec Wildanger Technik GmbH http://www.WilTec.de http://www.aoyue.eu http://www.teichtip.de

Item 63229

Page 6 01 2022-1

Control panel

Name

Explanation

Function

POOL DISTANCE

Wall distance button

Setting the pool width

RUN TIME

Automatic service time button

STOP

Stop button

FWD/REW (forward/rewind)

Manual forward/backward move- Moving the robot to a precise

ment

spot

AUTO RUN (automatic operation)

Automatic operation button

Cleaning robot is working automatically.

Operational time display for automatic operation

Pool width display

Item 63229

Page 7 01 2022-1

Function and adjustment of nozzles
The robot has two nozzles, one of which opens when the other closes. Water flows through the opening nozzle to move the cleaning robot forward. The user can change the orientation of the nozzle by turning it to control the track that the robot takes.

Adjustment of nozzle, speed, and track
· In general, cleaning is more efficient when the robot runs more slowly. · The larger the curve described by the track, the less the cable is twisted. Overlapping tracks and different settings of the nozzles

Low speed Adjust with symbol (see fig.)

High speed Adjust with symbol (see fig.)

The user can select the appropriate nozzle orientation for different pool types, e.g., a low speed with a large radius of movement, by setting the circle symbol to the 45° position (movement to the left) or
75° position (movement to the right).

Item 63229

Page 8 01 2022-1

Nozzle adjustments
· In most cases, the same orientation of both nozzles is suitable for every pool shape. · A curved and direct track alternate if one of the nozzles is set to 30° and the other to 60°; this
will permit that a very large portion of the floor be covered, and it will help to release any cable twists.
Distance adjustment
· On the control panel, select a suitable pool distance according to the pool width. · It is recommended to select a larger distance if the nozzle is set to a low speed or if your pool
is sloped. With a pool of 6 m of width, it is recommended to select an 8 m or 10 m distance if the robot is to run slowly.
Sloped pool adjustments
Set the nozzle to a high speed, so that the robot can cope with the slope, by reinforcing the water flow rate of the robot (see fig. concerning high speed).
Note! With some pool shapes, it cannot be guaranteed that the cleaning robot can cover the entire surface of the floor. You can adapt the nozzle orientation to reduce the moving curve ; however, that means that the cable will be twist more often.

Recommended nozzle orientation Direction of higher speed
Pool distance

Figures

Item 63229

Page 9 01 2022-1

Direction of lower speed Pool distance

Figures

Item 63229

Page 10 01 2022-1

Sloped pool
Pool distance Depending on pool size

Figures

Note! The above-mentioned values are recommendations. The user must adapt the suitable nozzle orientation considering the above-mentioned procedure and the actual pool. Placing the cleaning robot into the water
1. With one hand, hold the cable, making sure that there is enough cable between your hand and the robot that the device can plunge into the water without however touching the floor. With the other hand, hold the handle of the cleaning robot and slowly place the device into the water.
2. Hold the cable until the robot has filled itself with water and begins to sink towards the floor.

3. By obeying the above procedure, you will avoid that the cleaning robot tip over.

Item 63229

Page 11 01 2022-1

Cleaning the filter bag Taking out the bag
1. Open the retaining ring and the robot.
Retaining ring
2. On one side, press down the bracket and lift the filter unit.

3. Remove the filter unit.

Item 63229

Page 12 01 2022-1

4. Open the small bracket and take out the filter bag for cleaning.

Reinstall Reinstall the filter unit. Insert one side of the filter cartridge into the bracket.

Press down the bracket on the opposite and correctly place the filter unit.

Item 63229

Page 13 01 2022-1

Replacing the filter bag Insert a new filter bag if the old one is damaged. Obey the steps of the following figure.

Helpful hints
· Unplug the plug after use. However, do not plug it out with your hands being wet. · The cleaning robot should not touch de pool walls when you take it out of the water to avoid that
the surface of the pool be scratched or the robot be damaged. · Before taking the robot out and placing it on the edge of the pool, hold it above the water surface
during approx. 1015 s to allow the water remaining inside the casing to drain off. · Hold the robot at the handle to take it out of the pool.

Item 63229

Page 14 01 2022-1

Troubleshooting

Problem

Possible cause

Cable twists itself or 1. Cable not completely unwound coils up

2. Bad nozzle angle

3. Obstacle in the pool 4. Stuck to the main drain of the pool

5. Long operational time
Robot does not cover 1. Power-supply unit incorrectly placed the entire surface of the floor
2. Nozzle badly oriented

3. Unusual pool shape

4. Filter system and pump switched on

5. Cable too short
Cleaning robot does not Bad connection of mains cable/plug. run

Solution
1. Unplug the plug and disentangle cable.
2. Set water outlet to correct angle.
3. Remove obstacle.
4. Switch off filter system of the pool.
5. Disentangle cable by hand.
1. Correctly place the power-supply unit so that the robot can reach every spot.
2. Set nozzle to correct orientation.
3. Set nozzle so that the moving radius increases.
4. Switch off filter system of the pool.
5. Unwind cable further.
Correctly plug in mains cable/plug.

Item 63229

Page 15 01 2022-1

Regulations for waste disposal
The Waste Electrical and Electronic Equipment Directive (WEEE Directive, 2012/19/EU) of the EU was implemented in the German law related to electrical and electronic equipment and appliances.
All WilTec electric devices that fall under the WEEE directive are labelled with the symbol of a crossedout wheeled rubbish bin. This symbol indicates that this electric device must not be disposed of with the domestic waste.
WilTec Technik GmbH is registered with the German registration authority EAR (Stiftung ElektroAltgeräte Register) under the WEEE-registration number DE45283704.
Disposal of used electrical and electronic devices (intended for use in the countries of the European Union and other European countries with a separate waste collection system for these devices). The symbol on the packaging or the product itself indicates that this product must not be treated as normal domestic waste but must be disposed of at a recycling collection station for electrical and electronic waste. By disposing of this product correctly, you contribute to the protection of the environment and the health of your fellow people. Inappropriate disposal threatens the environment and health.
Material recycling helps to reduce the consumption of raw materials.
Additional information about the recycling of this product can be provided by your local commune, the municipal waste disposal facilities, or the store where you purchased the product.
Address: WilTec Wildanger Technik GmbH
Königsbenden 12 / 28 52249 Eschweiler Germany

Important Note:

Reproduction and any commercial use (of parts) of this operating manual, requires a written permission of WilTec Wildanger Technik GmbH.

Item 63229

Page 16 01 2022-1

References

Microsoft Word 2016 Microsoft Word 2016