Altronix Home
Installation Guide for Altronix models including: Trove1BL1R Rack Enclosure with Universal Blank Backplane, Trove1BL1R, Rack Enclosure with Universal Blank Backplane, Universal Blank Backplane, Blank Backplane, Backplane
20 set 2023 — Trove1BL1R. Trove1R rack mount enclosure with TBL1R universal blank backplane. • 16 Gauge black enclosure with ample knockouts for convenient access.
2023-09-20 — Trove1BL1R. Trove1R rack mount enclosure with TBL1R universal blank backplane. • 16 Gauge black enclosure with ample knockouts for convenient access.8 puslapiai
File Info : application/pdf, 8 Pages, 954.35KB
DocumentDocumentAccess & Power Integration Trove1BL1R - Trove1R rack enclosure with universal blank backplane (TBL1R) Installation Guide All registered trademarks are property of their respective owners. Rev. TBLR102418 More than just power.TM Installing Company: _______________ Service Rep. Name: __________________________________ Address: _____________________________________________ Phone #: __________________ Overview: Altronix Trove1BL1R can be customized to accommodate various combinations of access control and power supply boards and accessories for access control systems. TBL1R backplane is blank, which allows for ultimate flexibility in configuration. Specifications: Agency Listings: · CE European Conformity. Trove1BL1R Trove1R rack mount enclosure with TBL1R universal blank backplane. · 16 Gauge black enclosure with ample knockouts for convenient access. · Modular 2U standard EIA 19" drawer with extendable slides up to 48". · Dimensions (H x W x D): 3.375" x 19.0" x 26.5" (85.8mm x 482.6mm x 673.1mm). · Includes tamper switch (Altronix Model TS112 or equivalent) and cam lock. TBL1R Universal blank backplane. · 16 Gauge backplane. · Dimensions (H x W x D): 18.5" x 15.25" x 0.3125" (469.9mm x 387.4mm x 7.9mm). Optional Accessories: · RE2: Rack Mount Battery Enclosure accommodates up to four (4) 12VDC/7AH batteries · WM5, WM25, WM100: Magnetic Cable Tie Mounts (5, 25, 100 counts). · LC3: 6 ft. three-wire line cord. - 2 - Trove1BL1R Installation Guide Installing Trove1R into Rack Tower: Wiring methods shall be in accordance with the National Electrical Code/NFPA 70/ANSI, and with all local codes and authorities having jurisdiction. These products are for indoor use only and must be installed within the protected premises. Note: First assemble and Install Z Bracket Wire Management Accesory (refer to Z Bracket Installation pg. 4) 1. Remove backplane from enclosure prior to installing into rack cabinet Fig. 1 Back of the drawer, viewed from outside. (do not discard hardware). 2. In order to mount included UL Listed tamper switch (Altronix Model TS112 or equivalent) turn the enclosure upside down. Punch out the knockout in designated location, on the back of the unit, from outside of the drawer (Fig. 1, pg. 3). Insert the tamper switch into the knockout from outside of the drawer with the button facing outwards and spaded connectors inside the drawer. Connect tamper switch wiring to the Access Control Panel input or the appropriate UL Listed reporting device. Tamper Switch To activate alarm signal open the rack drawer. mounting location 3. Slide the rack enclosure into an open 2U location in the four post rack cabinet. 4. Utilizing proper fasteners attach front ears to the rack rails. 5. Attach the rear of the adjustable slides to the rear rails of the rack cabinet with the proper fasteners. 6. Secure the rack cover (Fig. 2a, pg. 3) and rack drawer to earth ground (Fig. 2b, pg. 3). Fig. 2 Fig. 2b Fig. 2a 7. Mounting Boards and Accessories to TBL1R: a. Carefully plan the boards' layout and mark their place(s) on backplane. b. Drill the backplane in the marked spots using appropriate tools. c. Attach mounting hardware for the boards and mount boards according to their specifications. d. Make all wire connections between boards prior to mounting backplane into Trove rack. e. Ensure all internal configurations (voltage selection, switch settings, etc.) are completed before mounting backplane back into Trove rack enclosure. 8. After all components are mounted on the backplane, fasten backplane into Trove rack utlizing supplied mounting hardware. Trove1BL1R Installation Guide - 3 - Assembling and Attaching Z Bracket Wire Management Accessory (included): Altronix Trove Rack enclosures include Z Bracket, a convenient and reliable wire management accessory. Hardware (included): Fig. 3 Ten (10) bolts and eight (8) lock nuts. 1. Carefully unpack Z Bracket. Do not discard hardware (included) (Fig. 3, pg. 4). 2. Attach arms to each other using bolts and lock nuts (Fig. 3a, pg. 4). 3. Attach the hinge brackets to the ends of arms using bolts and nuts positioning them as shown on (Fig. 3b, pg. 4). 4. Make sure that all nuts are tightened. Two (2) Fig. 3a Fig. 3b 5. Attach the hinge bracket on the longer side of Z Bracket to the adjustable slide using bolts and lock nuts (included) (Fig. 4, 4a, pg. 4). 6. Attach the hinge bracket on the shorter side of Z Bracket to the rear of the rack enclosure using bolts (included). Fig. 4 Fig. 4a - 4 - Trove1BL1R Installation Guide Notes: Trove1BL1R Installation Guide - 5 - Notes: - 6 - Trove1BL1R Installation Guide TBL1R Backplane Dimensions (H x W x D): 18.5" x 15.25" x 0.3125" (469.9mm x 387.4mm x 7.9mm) 15.25" (387.4mm) 18.5" (469.9mm) Trove1BL1R Installation Guide - 7 - Trove1R Enclosure Dimensions: 3.375" x 19.0" x 26.5" (85.8mm x 482.6mm x 673.1mm). Shown with Z Bracket attached. Tamper Switch Conduit 3/4" 1/2" 2.4" 61mm 4.57" 116.1mm 3/4" Conduit 1" Conduit 11.175" (283.8mm) 1" (25.4mm) 0.55" (14mm) R 1.27" (32.3mm) 0.1" 2.5mm 3.62" 92mm 1.5" 38.1mm 26.5" 673.1mm 3.375" 85.8mm 19" (482.6mm) Altronix is not responsible for any typographical errors. 140 58th Street, Brooklyn, New York 11220 USA | phone: 718-567-8181 | fax: 718-567-9056 website: www.altronix.com | e-mail: info@altronix.com | Lifetime Warranty IITrove1BL1R D09V MEMBER - 8 - Trove1BL1R Installation Guide