Newport Brass || Quality Bath & Kitchen Products
Instruction Manual for NEWPORT BRASS models including: 3103 Single Hole Lavatory Set, 3103, Single Hole Lavatory Set, Hole Lavatory Set, Lavatory Set
Newport Brass 3103/034 Pavani 1.2 GPM Single Hole Bathroom | Build.com
File Info : application/pdf, 3 Pages, 550.60KB
DocumentDocumentINSTALLATION INSTRUCTIONS SINGLE HOLE LAVATORY SET MODEL No: 3103 2001 CARNEGIE AVE, SANTA ANA CA 92705 (949) 417-5207 WWW.NEWPORTBRASS.COM Recommended Installation by a Professional Plumbing Contractor Note: The use of petroleum base plumbers putty on our products will nullify the warranty. We recommend the use of clear silicone sealing materials. Recommended deck thru hole Ø 1-1/8" 1. Place the spout hoses, one at a time, and secure spout into place with MOUNTING KIT (1) See Fig. 1 2. Attach hot/cold spout supply hoses to valves in the wall. See Fig. 2 3. Drain assembly installation. Remove drain FLANGE (4) from TAILPIECE (9). Place FLAT WASHER (7) and then FLANGE (4) through sink drain opening. (Clear silicone may be used in place of white washer.) From bottom side of sink, place cone shaped rubber WASHER (5) onto FLANGE (4) and slide up against sink bottom. Note: Cone portion of WASHER (5) to face upward. Next slide on clear WASHER (6) and secure with flange NUT (8). Place NUT (8) & tighten to FLANGE (4). See Figure 3. 4. Apply thread sealant to STOPPER (10) and attach to DRAIN ASSEMBLY (11) See Figure 4. NWP-3103 1 2 Figure 1 3/8" COMPRESSION OUTLET 9/16-24 UNEF (FOR 3/8" COMPRESSION OUTLET ) Figure 2 Figure 3 Drain assembly NWP-3103 Figure 4 EN-4590 REV. NC