Sansui ES-24X3AL Monitor Quick Start Guide

Getting Started

Note: Use a screw driver to tighten the screw.

Monitor Settings

Picture Settings

Brightness: Adjust display brightness (Range: 0-100).

Contrast: Adjust display contrast (Range: 0-100).

Blacklevel: (Range: 0-10).

Sharpness: (Range: 0-10).

DCR: Enable or disable the Dynamic Contrast Ratio (DCR) function.

Image Ratio: Set the display aspect ratio (Options: Auto, 16:9, 4:3).

Picture Mode

Select a preset picture mode for different viewing scenarios: Energy Star, Standard, Movie, Office, FPS, RTS, RACING, SRGB.

Gamma

Adjust the gamma curve for color and brightness: Off, 1.8, 2.0, 2.2, 2.4.

Color Settings

Low Blue Light: Reduce blue light emission to ease eye strain (Options: Off, Weak, Middle, Strong).

Color Temperature: Adjust the overall color tone (Options: Warm, User, Cool, Normal).

RGB Components: Fine-tune individual Red, Green, and Blue color channels (Range: 0-100 for each).

Input Source

Auto Input Select: Automatically detect and switch to the active input source (Options: Off, On).

Available input signals: HDMI, VGA.

OSD (On-Screen Display) Settings

H.Position: Adjust the horizontal position of the OSD menu (Range: 0-100).

V.Position: Adjust the vertical position of the OSD menu (Range: 0-100).

Timeout: Set the duration the OSD menu remains visible before disappearing (Range: 0-60 seconds).

Transparency: Adjust the transparency level of the OSD menu (Range: 0-100).

DDC/CI: Enable or disable Display Data Channel/Command Interface (Options: Off, On).

Reset: Restore all monitor settings to their factory defaults (N/A).

Auto Configuration (VGA Input Only)

These settings are used to optimize the display when connected via VGA.

Auto Colour: Automatically adjusts color balance.

H.Position: Adjusts horizontal position (Range: 0-100).

V.Position: Adjusts vertical position (Range: 0-100).

Clock: Adjusts pixel clock frequency (Range: 0-100).

Phase: Adjusts pixel phase (Range: 0-100).

Note: Settings are subject to the actual status of the menu.

Important Safety Information

WARNING: To prevent serious injury or death from a falling monitor, never place it in an unstable location. Take simple precautions:

• Use only cabinets or stands recommended by the manufacturer.
• Ensure furniture can safely support the monitor.
• Do not let the monitor overhang the edge of supporting furniture.
• Avoid placing the monitor on tall furniture (e.g., cupboards, bookcases) unless both furniture and monitor are securely anchored.
• Do not place the monitor on cloth or other materials between it and the furniture.
• Educate children about the dangers of climbing furniture to reach the monitor or its controls.

Apply these considerations if relocating an existing monitor.

Wall Mounting Screw Specifications:

• 22-24 inch monitors: M4 screws
• 28-70 inch monitors: M6 screws
• 75 inch monitors: M8 screws

Note: Do not hang the monitor at an angle to prevent the risk of falling.

Note: When using a wall mount, installation height should not exceed 2 meters.

(The document also contains safety warnings in French, which are a translation of this English text.)