User Manual for VEVOR models including: 18R, 15R, 12R, 24R, 21R, 27R, 1530OV, 1833OV, 1224OV, 1632RE, 1224RE, 18R Pool Liner Pad, 18R, Pool Liner Pad, Liner Pad

司顺工业设计


File Info : application/pdf, 8 Pages, 313.95KB

PDF preview unavailable. Download the PDF instead.

sku1~5714~1719-诺兰-地上泳池底垫-说明书(生产版)-20241126 1736903562039
Technical Support and E-Warranty Certificate www.vevor.com/support
POOL LINER PAD USER MANUAL
MODEL:18R15R12R24R21R27R 1530OV1833OV1224OV1632RE1224RE
We continue to be committed to provide you tools with competitive price. "Save Half", "Half Price" or any other similar expressions used by us only represents an estimate of savings you might benefit from buying certain tools with us compared to the major top brands and does not necessarily mean to cover all categories of tools offered by us. You are kindly reminded to verify carefully
when you are placing an order with us if you are actually Saving Half in comparison with the top major brands.

POOL LINER PAD
MODEL:18R15R12R24R21R27R1530OV1833OV1224OV 1632RE1224RE
NEED HELP? CONTACT US! Have product questions? Need technical support? Please feel free to contact us:
Technical Support and E-Warranty Certificate www.vevor.com/support
This is the original instruction, please read all manual instructions carefully before operating. VEVOR reserves a clear interpretation of our user manual. The appearance of the product shall be subject to the product you received. Please forgive us that we won't inform you again if there are any technology or software updates on our product.
1

SAFETY INSTRUCTIONS
WARNING: Read this material before using this product. Failure to do so can result in serious injury.
Assembly precautions 1. Assemble only according to these instructions. Improper assembly can
create hazards. 2. Wear ANSI-approved safety goggles and heavy-duty work gloves
during assembly. 3. Keep the assembly area clean and well-lit. 4. Keep bystanders out of the area during assembly. 5. Do not assemble if tired or when under the influence of alcohol, drugs
or medication. 6. The product capabilities apply to properly and completely assembled
products only. 7. Assemble on a flat, level, hard and smooth surface capable of safely
supporting the Pool Liner Pad. 8. For additional information regarding the parts listed in the following
pages, please refer to the Assembly Diagram of this manual. Unwrap and separate all parts in a clean work area.
Use precautions 1. DO NOT SIT OR STAND ON THIS ITEM. 2. This product is not a toy. Do not allow children to play with or near this
item. 3. Do not exceed specified weight capacities. 4. Use only on a flat, level, hard, and smooth surface that can safely
support a fully loaded Pool Liner Pad. 5. Use as intended only. 6. Inspect before every use; do not use if parts are loose or damaged.
SAVE THIS MANUAL
2

POOL LINER PAD INSTALLATION INSTRUCTIONS For best results,unfold the LinerLife line pad 24 hrs prior to installation to allow crease lines to smooth out. 1.After the pool wall has been assembled,smooth and level the appropriate amount of sand on the pool floor.Sand coves should be created at this time as well. NOTE: If foam coves are being used,install after the pad has been put down. 2.Spread the precut pool liner over the sand,ensuring it is even around the perimeter of the pool. 3.If a foam cove is being used,install it over the liner pad (as shown in illustration right). 4. Install the liner over the liner pad and foam cove (if applicabl
3

PRODUCT PARAMETER

Model 18R

Size 18ft 180g/m2

colour black

15R

15ft 180g/m2

12R

12ft 180g/m2

24R

24ft 180g/m2

21R

21ft 180g/m2

27R

27ft 180g/m2

1530OV

15*30ft 180g/m2

1833OV

18*33ft 180g/m2

black black black black black black black

1224OV

12*24ft 180g/m2

1632RE

16*32ft 180g/m2

black black

1224RE

12*24ft 180g/m2

black

4

Net weight 4.5kg 3kg 2kg 7.7kg 6.3kg 9.85kg 7kg 9.4kg 4.7kg 8.7kg 5.1kg

Manufacturer: Shanghaimuxinmuyeyouxiangongsi Address: Shuangchenglu 803nong11hao1602A-1609shi, baoshanqu, shanghai 200000 CN. Imported to AUS: SIHAO PTY LTD. 1 ROKEVA STREETEASTWOOD NSW 2122 Australia Imported to USA: Sanven Technology Ltd. Suite 250, 9166 Anaheim Place, Rancho Cucamonga, CA 91730
E-CrossStu GmbH
EC REP Mainzer Landstr.69, 60329 Frankfurt am Main.
YH CONSULTING LIMITED.
UK REP C/O YH Consulting Limited Office 147, Centurion House, London Road, Staines-upon-Thames, Surrey, TW18 4AX
5

Technical Support and E-Warranty Certificate www.vevor.com/support



References

WPS 文字