Goobay 60471 Wireless Quick-Charging Pad 15W

1 Safety Instructions

The user manual is part of the product and contains important information for correct use.

• Read the user manual completely and carefully before use.
• The user manual must be available for uncertainties and passing the product.
• Keep this user manual.
• Do not open the housing.
• Do not modify product and accessories.
• Do not short-circuit connectors and circuits.

A defective device may not be put into operation, but must be protected against further use.

• Use product, product parts and accessories only in perfect condition.
• Avoid stresses such as heat and cold, moisture and direct sunlight, microwaves, vibrations and mechanical pressure.
• In case of questions, defects, mechanical damage, trouble and other problems, non-recoverable by the documentation, contact your dealer or producer.

Not meant for children. The product is not a toy!

• Secure packaging, small parts and insulation against accidental use.

Dangers in the vehicle

Attention while driving may be impaired and serious accidents, personal injury and property damage may occur.

• Place the product so that the driver is not obstructed.
• Do not operate your charging equipment while driving.

There is a risk that the charging device may fall or become a skidding hazard.

• Do not pick up your charging devices while driving if they fall off the charging mat.
• Do not charge devices that are larger or thicker than the surface of the charging mat.
• Only use the charging mat when the engine is running.

Otherwise, there is a risk that the capacity of the vehicle battery will be reduced to such an extent that it will no longer be possible to start the engine.

Heat storage

Heat is generated during inductive charging.

• Make sure that there are no metal parts on the back of your device (e.g. metal cover, metal plate for magnetic holder). Metal heats up strongly in the induction field and can cause damage to the product or your end device.
• Do not cover the product.

Magnetism

The product contains magnetic materials.

• Consult a doctor before use to ensure compatibility with implanted medical devices.
• Keep a minimum distance of 20 cm from medical devices.
• Do not store and/or operate the product near bank cards.

Tripping hazard

• Install the product so that no persons or property can be injured or damaged, e.g. by falling, tripping or the like.

2 Description and function

3 Intended use

We do not permit using the device in other ways like described in chapter "Description and Function" or in the "Safety Instructions". Use the product only in dry interior rooms. Not attending to these regulations and safety instructions might cause fatal accidents, injuries, and damages to persons and property.

4 Preparation

1. Check the scope of delivery for completeness and integrity.
2. Compare the specifications of all used devices and ensure compatibility.

5 Connection and operation

1. Place the charging mat on a dust-free, level, horizontal surface.
2. Connect the USB-C™ socket of the charging mat to a USB power source via the charging cable. This can be either a 230 V USB charging adapter, a 12/24 V car USB charger or the USB socket of a PC (see Fig. 2).Fig. 2: Depicts how to connect the charging mat to various USB power sources: a 230V USB charging adapter, a 12/24V car USB charger, and a PC's USB port.
3. Place a Qi standard compatible device on the charging mat (see Fig. 3).Fig. 3: Shows a Qi-compatible smartphone being placed on the charging mat for wireless charging.
4. Remove your device from the charging mat when it is fully charged.
5. Disconnect all cable connections after use.

6 Smartphone holder

In addition to the charging function, the charging mat also has a convenient smartphone holder for using your device in navigation mode (see Fig. 4). Simultaneous wireless charging of your device is not possible, as the device is then no longer within the charging induction radius.Fig. 4: Illustrates the use of the integrated smartphone holder on the charging mat, suggesting its utility for navigation purposes.

7 Maintenance, Care, Storage and Transportation

The product is maintenance-free.

NOTICE! Material damage

• Only use a dry and soft cloth for cleaning.
• Do not use detergents or chemicals.
• Store the product out the reach of children and in a dry and dust-protected ambience when not in use.
• Store cool and dry.
• Keep and use the original packaging for transport.

8 Disposal instructions

9 EU Declaration of conformity

Hereby Goobay®, a registered trademark of Wentronic GmbH, ensures that the mentioned radio system type is conformed to Directive 2014/53/EU. The full text of EU Declaration of Conformity is available at the following Internet address: https://www.wentronic.com/en/

Symbols Used