Warranty Policy | EGO POWER+
Instruction Manual for EGO models including: LM2110E, LM2110E 56 Volt Lithium Ion Cordless Mower, 56 Volt Lithium Ion Cordless Mower, Lithium Ion Cordless Mower, Ion Cordless Mower, Cordless Mower, Mower
25 ago 2023 — Safety Alert. Indicates a potential personal injury hazard. Read Operator's. Manual. To reduce the risk of injury, user must read the operator's manual. Wear ...
6 56 VOLT LITHIUM-ION CORDLESS MOWER — LM2110E-SP READ ALL INSTRUCTIONS! READ OPERATOR'S MANUAL WARNING: To ensure safety and reliability, all repairs and replacements should be performed by a qualified service technician. Intended use & Foreseeable misuse: The product is intended for mowing grass in domestic gardens only.
Index of /medias/docus/84
File Info : application/pdf, 20 Pages, 2.15MB
DocumentDocumentOPERATOR'S MANUAL
56 VOLT LITHIUM-ION CORDLESS MOWER
MODEL NUMBER LM2110E-SP
WARNING: To reduce the risk of injury, the user must read and understand the Operator's Manual before using this product. Save these instructions for future reference.
MNL_EGO_LM2110E-SP_AV01.01_230413
A 2. Self-Propel Trigger
3. Bail Switch (Switch Lever) 4. Mower-Status Indicator
19. Mulching Insert 5. Rear Discharge Door
6. Rear Handle 7. Battery Compartment Cover
1. Self-Propel Speed-Control Knob 18. Handle 17. Safety Button 16. Headlights Button 15. Side Rail
14. Handle-Locking Clamp
13. Grass Bag 12. Quick-Adjust Lever
8. LED Headlights
11. Cutting-Height Adjustment Lever
9. Front Wheel
B 20. Front Handle 21. Mower Deck
10. Rear Wheel C
22. Trailling Shield
D
E
23. Battery-Release Button
F
G
H 2
J 1
I
Grass Bag
Attachment/
Removal
Position
Upper Operating Position
1
Middle Operating
Position
Locked Storage Position
Lower Operating Position
K
2
L Cutting-Height Adjustment Lever
Cutting-Height 1 Indication Plate 2
M Battery Compartment
1 Cover
Battery-Release Button
2
N
O
2 1
Indication Line
P
1
23
Q
2
Bail Switch
1
Safety Button
R
S
Self-Propel Speed-Control Knob
OFF
Self-Propel Trigger
T
LED Headlights
U
OFF
Mower-Status Switch Button for
Indicator
LED Headlights
V
W
THIS SIDE FACING GRASS
Loosen
Stablizer
Recommended torque for removing or tightening the blade bolt is 49-59Nm.
X
Y
Tighten
THIS SIDE FACING GRASS
Stablizer
Fan Blade
THIS SIDE FACING GRASS
Bolt
Out Flange
READ ALL INSTRUCTIONS!
READ OPERATOR'S MANUAL
SAFETY INSTRUCTIONS
This page depicts and describes safety symbols that may appear on this product. Read, understand, and follow all instructions on the machine before attempting to assemble and operate it.
WARNING: To ensure safety and reliability, all repairs and replacements should be performed by a qualified service technician.
Intended use & Foreseeable misuse: The product is intended for mowing grass in domestic gardens only. It must not be used to mow unusually high, dry or wet grass, e.g. pasture grass; or to shred leaves. The product is to be used only for its prescribed purpose. Any other use is deemed to be a case of misuse.
SAFETY SYMBOLS
The purpose of safety symbols is to attract your attention to possible dangers. The safety symbols and the explanations with them deserve your careful attention and understanding. The symbol warnings do not, by themselves, eliminate any danger. The instructions and warnings they give are no substitutes for proper accident prevention measures.
WARNING: Be sure to read and understand all safety instructions in this Operator's Manual, including all safety alert symbols such as "DANGER," "WARNING," and "CAUTION" before using this tool. Failure to follow all instructions listed below may result in electric shock, fire, and/or serious personal injury.
SYMBOL MEANING
SAFETY ALERT SYMBOL: Indicates DANGER, WARNING, OR CAUTION, may be used in conjunction with other symbols or pictographs.
WARNING: The operation of any power tools can result in foreign objects being thrown into your eyes, which can result in severe eye damage. Before beginning power tool operation, always wear safety goggles or safety glasses with side shields and a full face shield when needed. We recommend a Wide Vision Safety Mask for use over eyeglasses or standard safety glasses with side shields.
Safety Alert
Indicates a potential personal injury hazard.
Read Operator's Manual
To reduce the risk of injury, user must read the operator's manual.
Always wear hearing
Wear protective glasses and hearing protection
protection, safety goggles or safety glasses with side shields and a full face shield when operating this
product.
Keep hands and feet away from the blades
Keep hands and feet away from the blades.
Keep Bystanders Away
Ensure that other people and pets remain at least 30m away from the mower when it is in use and pay attention to the risk of injury caused by flying debris.
Disconnect battery before maintenance
Switch off and remove detachable battery pack (or disabling device) before adjusting or cleaning.
XX Noise
Guaranteed sound power level.
Keep hand away Keep hand away.
CAUTION
Do not stare at operating lamp.
The RCM is a
symbol that represents compliance with Australian
The RCM is a symbol that represents compliance with Australian Standards.
Standards
IPX4
Ingress Protection Protection from splashing
Degree
water.
V Volt
Voltage
6 56 VOLT LITHIUM-ION CORDLESS MOWER -- LM2110E-SP
A Amperes Kg Kilogram min Minutes
Direct Current
Current
Weight of the machine which is stated on the nameplate.
Time Type or a characteristic of current.
GENERAL POWER TOOL SAFETY WARNINGS
WARNING: READ ALL SAFETY WARNINGS, INSTRUCTIONS, ILLUSTRATIONS AND SPECIFICATIONS PROVIDED WITH THIS MACHINE. Failure to follow all instructions listed below may result in electric shock, fire and/or serious injury.
SAVE ALL WARNINGS AND INSTRUCTIONS FOR FUTURE REFERENCE.
The term "machine" in the warnings refers to your mainsoperated (corded) machine or battery-operated (cordless) machine.
WORK AREA SAFETY
Keep work area clean and well lit. Cluttered or dark
areas invite accidents.
Do not operate machines in explosive atmospheres,
such as in the presence of flammable liquids, gases or dust. Machines create sparks which may ignite the dust or fumes.
Keep children and bystanders away while
operating a machine. Distractions can cause you to lose control.
ELECTRICAL SAFETY
Machine plugs must match the outlet. Never
modify the plug in any way. Do not use any adapter plugs with earthed (grounded) machines. Unmodified plugs and matching outlets will reduce risk of electric shock.
Avoid body contact with earthed or grounded
surfaces, such as pipes, radiators, ranges and refrigerators. There is an increased risk of electric shock if your body is earthed or grounded.
Do not expose machines to rain or wet conditions.
Water entering a machine will increase the risk of electric shock.
Do not abuse the cord. Never use the cord for
carrying, pulling or unplugging the machine. Keep cord away from heat, oil, sharp edges or moving parts. Damaged or entangled cords increase the risk
of electric shock.
When operating a machine outdoors, use an
extension cord suitable for outdoor use. Use of a cord suitable for outdoor use reduces the risk of electric shock.
If operating a machine in a damp location is
unavoidable, use a residual current device (RCD) protected supply. Use of an RCD reduces the risk of electric shock.
PERSONAL SAFETY
Stay alert, watch what you are doing and use
common sense when operating a machine. Do not use a machine while you are tired or under the influence of drugs, alcohol or medication. A moment of inattention while operating machines may result in serious personal injury.
Use personal protective equipment. Always wear
eye protection. Protective equipment such as a dust mask, non-skid safety shoes, hard hat or hearing protection used for appropriate conditions will reduce personal injuries.
Prevent unintentional starting. Ensure the switch
is in the off-position before connecting to power source and/or battery pack, picking up or carrying the machine. Carrying machines with your finger on the switch or energising machines that have the switch on invites accidents.
Remove any adjusting key or wrench before
turning the machine on. A wrench or a key left attached to a rotating part of the machine may result in personal injury.
Do not overreach. Keep proper footing and balance
at all times. This enables better control of the machine in unexpected situations.
Dress properly. Do not wear loose clothing or
jewellery. Keep your hair and clothing away from moving parts. Loose clothes, jewellery or long hair can be caught in moving parts.
If devices are provided for the connection of dust
extraction and collection facilities, ensure these are connected and properly used. Use of dust collection can reduce dust-related hazards.
Do not let familiarity gained from frequent use of
machines allow you to become complacent and ignore machine safety principles. A careless action can cause severe injury within a fraction of a second.
MACHINE USE AND CARE
Do not force the machine. Use the correct machine
for your application. The correct machine will do
7
56 VOLT LITHIUM-ION CORDLESS MOWER -- LM2110E-SP
the job better and safer at the rate for which it was
Under abusive conditions, liquid may be ejected
designed.
from the battery; avoid contact. If contact
Do not use the machine if the switch does not turn
it on and off. Any machine that cannot be controlled with the switch is dangerous and must be repaired.
Disconnect the plug from the power source and/
or remove the battery pack, if detachable, from the machine before making any adjustments, changing accessories, or storing machines. Such preventive safety measures reduce the risk of starting the machine accidentally.
accidentally occurs, flush with water. If liquid contacts eyes, additionally seek medical help. Liquid ejected from the battery may cause irritation or burns.
Do not use a battery pack or machine that is
damaged or modified. Damaged or modified batteries may exhibit unpredictable behaviour resulting in fire, explosion or risk of injury.
Do not expose a battery pack or machine to
Store idle machines out of the reach of children
and do not allow persons unfamiliar with the machine or these instructions to operate the
fire or excessive temperature. Exposure to fire or
temperature above 130 °C may cause explosion.
Follow all charging instructions and do not
machine. Machines are dangerous in the hands of
charge the battery pack or machine outside the
untrained users.
Maintain machines and accessories. Check for
misalignment or binding of moving parts, breakage
of parts and any other condition that may affect
temperature range specified in the instructions. Charging improperly or at temperatures outside the specified range may damage the battery and increase the risk of fire.
the machine's operation. If damaged, have the machine repaired before use. Many accidents are caused by poorly maintained machines.
Keep cutting machines sharp and clean. Properly
maintained cutting machines with sharp cutting edges are less likely to bind and are easier to control.
Use the machine, accessories and machine bits
etc. in accordance with these instructions, taking into account the working conditions and the work
SERVICE
Have your machine serviced by a qualified repair
person using only identical replacement parts.
This will ensure that the safety of the machine is
maintained.
Never service damaged battery packs. Service
of battery packs should only be performed by the
manufacturer or authorized service providers.
to be performed. Use of the machine for operations LAWNMOWER SAFETY WARNINGS
different from those intended could result in a hazardous situation.
Keep handles and grasping surfaces dry, clean
and free from oil and grease. Slippery handles and grasping surfaces do not allow for safe handling and control of the machine in unexpected situations.
Do not use the lawnmower in bad weather
conditions, especially when there is a risk of lightning. This decreases the risk of being struck by lightning.
Thoroughly inspect the area for wildlife where the
lawnmower is to be used. Wildlife may be injured by
BATTERY MACHINE USE AND CARE
Recharge only with the charger specified by the
manufacturer. A charger that is suitable for one type
of battery pack may create a risk of fire when used
with another battery pack.
Use machines only with specifically designated
battery packs. Use of any other battery packs may
create a risk of injury and fire.
When battery pack is not in use, keep it away from
other metal objects, like paper clips, coins, keys,
nails, screws or other small metal objects, that can
make a connection from one terminal to another.
Shorting the battery terminals together may cause
the lawnmower during operation.
Thoroughly inspect the area where the lawnmower
is to be used and remove all stones, sticks, wires,
bones, and other foreign objects. Thrown objects
can cause personal injury.
Before using the lawnmower, always visually
inspect to see that the blade and the blade
assembly are not worn or damaged. Worn or
damaged parts increase the risk of injury.
Check the grass catcher frequently for wear or
deterioration. A worn or damaged grass catcher may
increase the risk of personal injury.
Keep guards in place. Guards must be in working
burns or a fire.
order and be properly mounted. A guard that is
loose, damaged, or is not functioning correctly may
8
result in personal injury.
56 VOLT LITHIUM-ION CORDLESS MOWER -- LM2110E-SP
Keep all cooling air inlets clear of debris. Blocked
air inlets and debris may result in overheating or risk
of fire.
While operating the lawnmower, always wear
non-slip and protective footwear. Do not operate the
lawnmower when barefoot or wearing open sandals.
This reduces the chance of injury to the feet from
contact with the moving blade.
While operating the lawnmower, always wear long
trousers. Exposed skin increases the likelihood of
injury from thrown objects.
Do not operate the lawnmower in wet grass. Walk,
never run. This reduces the risk of slipping and falling
which may result in personal injury.
Do not operate the lawnmower on excessively
steep slopes. This reduces the risk of loss of control,
slipping and falling which may result in personal injury.
When working on slopes, always be sure of your
footing, always work across the face of slopes,
never up or down and exercise extreme caution
when changing direction. This reduces the risk of
loss of control, slipping and falling which may result in
personal injury.
Use extreme caution when reversing or pulling the
lawnmower towards you. Always be aware of your
surroundings. This reduces the risk of tripping during
operation.
Do not touch blades and other hazardous moving
parts while they are still in motion. This reduces the
risk of injury from moving parts.
When clearing jammed material or cleaning the
lawnmower, make sure all power switches are off
and the battery pack is disconnected. Unexpected
operation of the lawnmower may result in serious
trimmer personal injury
Use only with EGO's battery packs and chargers listed
below:
SPECIFICATIONS
Model Number Self Propel System Voltage Recommended Operating Temperature Recommended Storage Temperature Optimum Charging Temperature No-Load Speed Cutting Height Cutting Height Positions Deck Size Cutting Width Grass Bag Volume Weight (without battery pack)
Blade Model
Blade Brake
PACKING LIST
PART NAME Lawn mower Grass bag Grass bag frame Mulching Insert Blade Operator's Manual
LM2110E-SP Yes 56 V 0°C-40°C
-20°C-70°C
5°C-40°C 2800 r/min 25-90 mm 7 53 cm 52 cm 70 L 23 kg AB2103, AB2102(Sold Separately) Yes
QUANTITY 1 1 1 1 1 1
BATTERY PACK
CHARGER
BA1400, BA2800, BA4200, BA1400T, BA2800T, BA4200T, BA5600T, BA6720T
CH2100E, CH5500E, CH7000E
SAVE THESE INSTRUCTIONS. Refer to them frequently
and use them to instruct others who may use this machine. If you lend this machine to someone else, also lend these instructions to them to prevent misuse of the product and possibly injury.
DESCRIPTION
KNOW YOUR MOWER (Fig. A& B & C & D) 1. Self-Propel Speed-Control Knob 2. Self-Propel Trigger 3. Bail Switch (Switch Lever) 4. Mower-Status Indicator 5. Rear Discharge Door 6. Rear Handle 7. Battery Compartment Cover
9
56 VOLT LITHIUM-ION CORDLESS MOWER -- LM2110E-SP
8. LED Headlights 9. Front Wheel 10. Rear Wheel 11. Cutting-Height Adjustment Lever 12. Quick-Adjust Lever 13. Grass Bag 14. Handle-Locking Clamp 15. Side Rail 16. Headlights Button 17. Safety Button 18. Handle 19. Mulching Insert 20. Front Handle 21. Mower Deck 22. Trailing Shield 23. Battery-Release Button
OPERATION
ASSEMBLING THE GRASS BAG 1) Slide the grass bag onto the frame (Fig. E). 2) Assemble the top clips to the frame (Fig. F). Then
assemble the two side clips. Assemble the bottom clip lastly. 3) The completely assembled grass bag is shown in Fig. G.
ADJUSTING THE FOLDABLE HANDLE
WARNING: Do not attempt to start the mower until the handle has been locked at one of the three preset operating positions (UPPER OPERATING POSITION, MIDDLE OPERATING POSITION and LOWER OPERATING POSITION). Your mower is shipped with the handle in the compact, LOCKED STORAGE POSITION (Fig. H).
1) Press and hold the quick-adjust lever to release the handle from the LOCKED STORAGE POSITION.
2) Lift the handle from its folded position, then release the lever. Gently pivot the handle upward until you hear and feel the lock pin engage in one of the following different positions as shown in the Fig. I.
ATTACHING/REMOVING THE GRASS BAG/ MULCHING INSERT
WARNING: Do not at either time make any adjustment to the lawn mower without first stopping the motor, removing the battery pack and waiting for the
blade to stop rotating.
To Attach/Remove the Grass Bag (Fig. J)
Adjust the handle to the suitable operating position. Lift the rear discharge door and hook the grass bag onto the pivot rod. To remove, just lift the grass bag up, off of the pivot rod. Lastly, release the rear discharge door.
NOTICE: Remove the pre-installed mulching insert from the mower before attaching the grass bag to the mower.
NOTICE: leftover grass in the lawn mower grass bag can cause it to become overfilled and may even cause something to break. Empty the grass bag after each and every use!
To Attach/Remove the Mulching Insert (Fig. K)
ADJUSTING THE CUTTING HEIGHT (Fig. L)
WARNING: Keep your feet away from the deck when adjusting its height.
ATTACHING/DETACHING THE BATTERY PACK (Fig. M)
CHARGE BEFORE FIRST USE.
WARNING: If any parts are broken or missing, do not attempt to attach the battery pack to the mower or operate the mower until the broken or missing parts are replaced. Failure to do so could result in serious injury.
To Attach
Push the battery pack into the battery compartment until you hear a "click".
To Detach
Depress the battery-release button in the battery compartment.
NOTICE: Make sure that the latch on the mower snaps into place and that the battery pack is secured to the mower before starting operation.
STARTING/STOPPING THE MOWER
WARNING: The operation of any lawn mower can result in foreign objects being thrown into your or others' eyes, which can damage eyes severely. Always wear safety glasses while operating the mower, or while performing any adjustments or repairs on it.
WARNING: Do not use the mower in the rain.
10
56 VOLT LITHIUM-ION CORDLESS MOWER -- LM2110E-SP
WARNING: Ensure that other people and pets remain at least 30m away from the mower when it is in use.
WARNING: The blade will continue to rotate for a few seconds after the mower is turned off. Allow the motor/blade to stop rotating before starting it again. Do not rapidly turn the mower off and on.
WARNING: Stop the blade if the lawnmower has to be tilted for transportation when crossing surfaces other than grass and when transporting the lawnmower to and from the area to be mowed.
WARNING: Do not tilt the lawn mower when starting switching on the motor, except if the lawn mower has to be tilted for starting. In this case, do not tilt it more than absolutely necessary and lift only the part which is away from the operator.
self-propel capability. This system is independent of the blade On/Off switch. It is not dependent on blade rotation.
For example, when you have completed cutting your lawn, you can use the self-propel to propel the mower back to your storage location without blade rotation. Or you may choose to operate the mower as a non-self-propelled mower to maximize battery running time.
To operate the self-propel system without blade rotation, turn the self-propel speed-control knob on, press the selfpropel trigger(s).There are two self-propel triggers. Press either trigger to start the self-propel function (Fig. S).
To turn the self-propel off, release the self-propel trigger, turn the self-propel speed-control knob off.
LED HEADLIGHTS (Fig. T) To turn on the headlights, press the headlights button (Fig. U).
NOTICE: The motor cannot be started unless:
The side rails are fully extended (Fig. N). Both green handle-locking clamps are securely closed
(Fig. O).
The handle is locked into one of the three operating
positions.
To Start
1) Attach the battery pack to the mower.
2) Depress the safety button (Fig. P).
3) With the safety button depressed, pull the bail switch upward to meet the handle and release the safety button (Fig. Q).
To Stop
1) Fully release the bail switch (Fig. R).
2) The electric brake in the Automatic Braking Mechanism will stop the blade rotation.
3) Stop the machine, and remove the battery pack to make sure that all moving parts have come to a complete stop after striking a foreign object, and to inspect the machine for damage and make repairs before restarting and operating the machine.
4) Stop the machine, and remove the battery pack to make sure that all moving parts have come to a complete stop, if the machine starts to vibrate abnormally, and then to immediately inspect for damage, replace or repair any damaged parts and to check for and tighten any loose parts.
VARIABLE-SPEED SELF-PROPEL SYSTEM
To turn off the headlights, press the button again.
POWER INDICATOR ON THE MOWER
Mowerstatus indicator
Solid green
Meaning
Action
Mower is working properly; battery has at least 15% of its charge.
None required.
Flashing green
The side rails are not fully extended.
The handle is not locked in an operating positions.
Make sure that the side rails are fully extended.
Make sure that the handle is locked in an operating positions.
Flashing red
Low battery.
Stop the mower and charge the battery pack.
Solid orange
The mower stops due to overheating.
Remove the battery from the mower, move them to the shade and cool them for at least 15 minutes.
LM2110E-SP mower is equipped with variable-speed, 56 VOLT LITHIUM-ION CORDLESS MOWER -- LM2110E-SP
11
Flashing orange
The mower is overloaded.
Flashing red/green Error alternately
Dark & LED on battery flashing
Battery overheat.
First, remove the battery pack, then check and clean if grass has collected beneath the deck. Slow down your pace when cutting. If this does not work, please contact EGO.
Contact EGO
Release the bail switch, wait until the battery pack cools down, then restart the mower.
MOWER OVERLOAD PROTECTION
To prevent overload conditions, do not try to remove too much grass at one time. Slow down your cutting pace or raise the cut height.
Your mower has built-in overload circuit protection. When the mower is overloaded, the motor will stop and the power indicator on the mower will flash orange. Remove the battery pack from the mower. Check to see if grass has collected beneath the deck and clear it if necessary, then install the battery and restart the mower.
BATTERY HIGH TEMPERATURE PROTECTION
The battery pack will generate heat during operation. The heat dissipates more slowly in hot weather. If the battery temperature exceeds 70°C during operation, the protection circuit will immediately turn off the mower to protect the battery pack from damage. The power indicator on the mower will shine orange and the LED on the battery will flash orange. Release the bail handle, wait until the battery pack cools down to approximately 67°C, then restart the mower.
MAINTENANCE
WARNING: Before inspecting, cleaning or servicing the unit, stop the motor, wait for all moving parts to stop, and remove the battery pack. Failure to follow these instructions can result in serious personal injury or property damage.
WARNING: When servicing, use only identical replacement parts. Inspect and maintain the machine regularly. To ensure safety and reliability, all repairs should be performed by a qualified service technician.
GENERAL THE MOWER The underside of mower deck should be cleaned after each use, as grass clippings, leaves, dirt and other debris will accumulate.
Remove any build-up of grass and leaves on or around the drive shaft and the motor fan (do not use water). Wipe the mower clean with a damp cloth.
REMOVING/INSTALLING THE BLADE
WARNING: Always protect your hands by wearing heavy gloves or wrapping the cutting edges with rags or other materials when performing any maintenance on the mower blade. Always remove the battery pack when servicing or transporting the mower.
WARNING: Be careful during adjustment of the machine to prevent entrapment of the fingers between moving blades and fixed parts of the appliance.
To remove the blade (Fig. V)
Place a manual screwdriver or metal rod in the stabilizer hole. This is to stop the blade from rotating while loosening the bolt.
Use a wrench (impact wrench is recommended) to turn the blade bolt counterclockwise to loosen and remove the bolt. Remove the out flange and the blade (Fig. W).
To install the blade (Fig. X)
Following the assembly sequence in Fig. W. Position the blade on the shaft with the surface stating "THIS SIDE FACING GRASS" facing toward the outside. Mount the bolt into the shaft and turn it clockwise.
NOTICE: The recommended torque for removing or tightening the blade bolt is 49-59Nm.
STORING THE MOWER
The following steps should be taken in order to prepare the lawn mower for storage:
Always allow the machine to cool down before storing Remove the battery pack from the mower and store it
in a cool, dry and clean location. Do not store it next to corrosive materials, such as fertilizer or rock salt.
Lubricate the mower. Store the mower in a covered, enclosed space, that is
cool and dry and out of the reach of children.
Do not cover the lawn mower with a solid plastic sheet.
Plastic coverings trap moisture around the mower, which causes rust and corrosion.
The mower can be stored upright or flat. (Fig. Y).
WARNING: If the mower begins to tip over from
12
56 VOLT LITHIUM-ION CORDLESS MOWER -- LM2110E-SP
the upright position, mower damage or personal injury may result. Always keep the mower stable and out of the reach of children when it is in the upright position. If possible, lay it flat for storage.
Protecting the environment
Do not dispose of electrical appliances as unsorted municipal waste, use separate collection facilities.
Contact your local government for information regarding the collection systems available.
If electrical appliances are disposed of in landfills or dumps, hazardous substances can leak into the groundwater and get into the food chain, damaging your health and well-being.
56 VOLT LITHIUM-ION CORDLESS MOWER -- LM2110E-SP
13
TROUBLESHOOTING
WARNING: Always remove the battery pack when servicing or transporting the mower. Always protect your hands by wearing heavy gloves or wrapping the cutting edges with rags or other materials when performing any maintenance on the mower blade.
PROBLEM
The mower fails to start
The mower cuts unevenly
Short running time of the mower with included battery The mower does not mulch properly
CAUSE
The battery pack is depleted. The battery pack is not mounted in place in
the battery compartment.
The battery or mower circuitry is too hot.
(The power indicator on the mower shines orange).
The side rails are not extended to their
maximum length and the clamps are not locked in position.
The handle is not set at one of the three
operating positions.
The mower deck is clogged with grass and
debris.
The blade is dull. The cutting height is not set properly.
The blade is assembled incorrectly.
Grass conditions and cutting height setting
will greatly affect the battery run time. The claimed run time is based on a light load condition.
Wet grass clippings are sticking to the
underside of the deck.
The mower is set to cut too much grass at
once.
SOLUTION
Charge the battery pack. Attach the battery pack to the
mower; press it until you hear a click.
Allow the battery pack or mower
to cool until the temperature drops below 67°C.
Fully extend the handle and lock
both clamps.
Adjust the handle to one of the three
operating positions.
Clean the mower deck and make
certain that the blade has freedom of movement.
Sharpen or replace the blade. Raise the deck to a higher cutting
height setting.
Reassemble the blade, following the
section "INSTALLING THE BLADE" in this manual.
Raise the blade height and slow
your pace to reduce the cutting load.
Wait until the grass dries before
mowing.
Raise the deck to a higher cutting
height setting.
14
56 VOLT LITHIUM-ION CORDLESS MOWER -- LM2110E-SP
PROBLEM
CAUSE
The battery pack charge is depleted. Mower is in overload condition.
The blade/motor unexpectedly stops while mowing
Mower deck is clogged with grass and
debris.
The battery or mower circuitry is too hot.
(The power indicator on the mower shines orange for 10s).
The side rail is retracted a little by the
pushing force applied on the handle.
There is excessive vibration
The handle-locking clamps cannot be closed in position
Mower is difficult to pull back when the self-propel is turned off
Self-propel function fails to turn on when one of the self-propel triggers is pressed
The motor works but the blade doesn't cut the grass
The cutting blade is loose. The cutting blade is unbalanced. The cutting blade is bent. The motor shaft is bent. The mower is set to cut too much grass at
once.
The side rails are not fully extended.
The wheels are temporarily locked.
The self-propel speed-control knob is set
all the way back effectively turning off the self-propel function.
The blade bolt is not tightened to the
required torque.
SOLUTION
Charge the battery pack. Raise the cutting height or slow
down the pace.
Unclog the mower deck. Raise the
cutting height and/or cut a narrower swath.
Allow the battery pack or mower
to cool until the temperature drops below 67°C.
Unlock the clamps. Fully extend the
side rails and lock the handlelocking clamps again.
Tighten the outer nut. Balance the blade. Replace the blade. Contact the service center. Raise the deck to a higher cutting-
height setting.
Fully extend the side rails, then lock
the clamps.
Simply push the mower ahead
slightly and then move the mower as desired.
Turn the self-propel speed-control
knob slightly forward BEFORE pressing the self-propel trigger.
Re-tighten the blade bolt to
recommended torque of 49-59 Nm.
56 VOLT LITHIUM-ION CORDLESS MOWER -- LM2110E-SP
15
WARRANTY POLICY
For warranty service or to make a claim, please visit our Warranty Portal at egopowerplus.com.au/warranty-policy, alternatively you can contact EGO customer service via the following, Australia 1300 000 346, New Zealand 0508 000 346.
Chervon Australia Pty Ltd ABN 36 165 077 501 and Chervon New Zealand Subsidiary Ltd NZBN 9429049277616 ("Chervon") warrants to the original domestic purchaser that this product will be free from defects in materials and workmanship for 5 years from date of purchase, and any battery or charger will be free from defects in materials and workmanship for 3 years from date of purchase. Warranty for commercial use is 1 year on all product, battery and chargers. The Commercial Range Product Warranty for commercial users is 2 years for product, backpack battery (BAX1501) and commercial charger (CHX5500E). Please refer to product warranty table below for further clarification. To make a claim, call 1300 000 346 for AU or 0508 000 346 for NZ or lodge a claim via our portal link above. Any handling and transportation costs (and other expenses incurred in claiming this warranty) are not covered by this warranty and will not be borne by Chervon. The replacement product or part or repaired product will be made available for your collection at an address nominated by Chervon. Where a valid warranty claim is made, Chervon will replace the defective product or repair the fault. Where the product is repaired, Chervon may use refurbished parts. This warranty does not cover normal wear and tear, misuse or abuse (including overloading of the product beyond capacity and exposure to water or rain), accidents, neglect or lack of proper installation, and improper maintenance or storage. This warranty does not cover the damage resulting from modification, alteration or unauthorised repair. This warranty does not cover normal deterioration of the exterior finish, including but not limited to scratches, dents, paint chips, or to any corrosion or discolouring by heat, abrasive and chemical cleaners. This warranty is void if the product has been used for rental purpose. This warranty may also be further limited or voided as specifically detailed in the product Manual. Chervon has no other liability under this warranty. The benefits to you given by this warranty are in addition to other rights and remedies imposed by State and Federal legislation that cannot be excluded. Our goods come with guarantees that cannot be excluded under the Australian Consumer Law and the New Zealand Consumer Guarantee Act 1993. You are entitled to a replacement or refund for a major failure and compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure. The warranty applies to the original purchaser and applies only to purchases made from authorised EGO Dealers, which can be confirmed on the website store locator. For avoidance of doubt, 3rd party online stores such as eBay, Gumtree, Amazon, etc. are excluded. Chervon Australia Pty Ltd, Unit 14, 5 Kelletts Rd, Rowville, VIC. 3178. Ph Australia; 1300 000 346. Email: support@egopowerplus.com.au Chervon New Zealand Subsidiary Ltd, 4th Floor, Smith & Caughey Building, 253 Queen St, Auckland, 1141. Ph New Zealand; 0508 000 346. Email: support@egopowerplus.co.nz
16
56 VOLT LITHIUM-ION CORDLESS MOWER -- LM2110E-SP
PRODUCT WARRANTY TABLE
PRODUCT OR MODEL #
LIMITED WARRANTY FOR CONSUMER USE (PERSONAL, HOUSEHOLD USE)
EGO Power+ Outdoor Power Equipment and Portable Power Products
EGO Power+ Battery Packs and Chargers
Specific warranties apply to the products below:
Commercial Tools: LBX6000, BCX3800, STX3800, HTX7500, CSX3000, PPX1000, PSX2500, PTX5100, BHX1001, STX4500, BCX4500, EDX2000, HTX5300-P, HTX5300-PA, LBPX8000
Commercial Backpack Battery: BAX1501
Commercial Charger: CHX5500E
5 years 3 years
5 years 3 years 3 years
LIMITED WARRANTY FOR PROFESSIONAL USE (ANY COMMERCIAL, AGRICULTURAL, INSTITUTIONAL, OR INCOME-PRODUCING USE)
1 year 1 year
2 years
2 years 2 years
17
56 VOLT LITHIUM-ION CORDLESS MOWER -- LM2110E-SP