Instruction Manual for SKYDANCE models including: C4, Dimming 4 Channel LED RF Controller, 4 Channel LED RF Controller, LED RF Controller, RF Controller, C4, Controller
RGB/RGBW dynamic mode list No. Name No. Name RGB jump RGB smooth 6 color jump 6 color smooth Yellow cyan purple smooth RGB fade in and out Red fade in and out
4CH*700mA 12-48VDC CC Controller (Push Dim) C4(700mA)
RGBW/RGB/CCT/Dimming 4 Channel LED RF Controller Model No.: C4(150-500mA) / C4(350-1200mA) 4 Channels/Multiple current/Push Dim/Wireless remote control/Auto-transmitting/Synchronize Features LVD RED Set as single color, dual color, RGB or RGBW controller by DIP switch. DC to DC constant current output, multiple output current settings. Match with RF 2.4G single zone or multiple zone single color, dual color and RGB/RGBW remote control. One RF controller accept up to 10 remote control. 4096 levels 0-100% dimming smoothly without any flash. When using with RGB/RGBW light, built in 10 dynamic mode, include jump or gradual change style. Auto-transmitting function: Controller automatically transmit signal to another controller with 30m control distance. Synchronize on multiple number of controllers. Fade in and out effect selectable. Connect with external push switch to achieve on/off and 0-100% dimming function. Technical Parameters Input and Output Input voltage 12-48VDC Output voltage Output current 4 x (10-42)VDC 4CH,150-500mA or 350-1200mA/CH Output power 4 x (1.5-21)W (150-500mA) 4 x (3.5-50.4)W (350-1200mA) Output type Constant current Environment Operation temperature Case temperature (Max.) IP rating Ta: -30 OC ~ +55 OC T c: +85OC IP20 Warranty and Protection Warranty 5 years Protection Reverse Polarity Short circuit Dimming data Input signal Control distance Dimming gray scale Dimming range Dimming curve Safety and EMC EMC standard (EMC) Safety standard(LVD) Radio Equipment(RED) Certification Weight Net weight Gross weight RF 2.4GHz + Push Dim 30m(Barrier-free space) 4096 (2^12) levels 0 -100% Logarithmic ETSI EN 301 489-1 V2.2.3 ETSI EN 301 489-17 V3.2.4 EN 62368-1:2020+A11:2020 ETSI EN 300 328 V2.2.2 CE,EMC,LVD,RED 0.120kg 0.140kg User Manual Ver 2.0.0 C4 RGBW/RGB/CCT/Dimming 4 Channel LED RF Controller Mechanical Structures and Installations LED indicator Match key DIP switch for current select Push switch + Push switch common DIP switch for light type select 175mm - ON 12 1 23 ON 1 23 CW CW Output White LED Output Blue LED Output Green LED Installation rack Output Red LED Output LED + Power Input + Power Input - 45mm 160mm 27mm LED Current Selection Note: Please select the correct current through the DIP switch on the PCB board when the power is off. DIP Switch C4 (150-500mA) Output Current Output Voltage Output Power/CH 150mA 10-42V 1.5-6.3W 200mA 10-42V 2-8.4W 250mA 10-42V 2.5-10.5W 300mA 10-42V 3-12.6W 350mA 10-42V 3.5-14.7W 400mA 10-42V 4-16.8W 450mA 10-42V 4.5-18.9W ON 1 23 500mA 10-42V 5-21W DIP Switch C4 (350-1200mA) Output Current Output Voltage Output Power/CH 350mA 10-42V 3.5-14.7W 500mA 10-42V 5-21W 600mA 10-42V 6-25.2W 700mA 10-42V 7-29.4W 800mA 10-42V 8-33.6W 900mA 10-42V 9-37.8W 1050mA 10-42V 10.5-44.1W 1200mA 10-42V 12-50.4W ON OFF ON OFF Wiring Diagram C4 for RGBW Push Switch ON 12 1 23 ON 1 23 + 12 CW CW Drives 3-13pcs LED per channel x 4CH RGBW remote AC100-240V Power Supply 12-48VDC Constant Voltage C4 for RGB Push Switch ON 12 1 23 ON 1 23 + 12 CW CW Drives 3-13pcs LED per channel x 3CH RGB remote AC100-240V Power Supply 12-48VDC Constant Voltage Page 1 C4 for dual color Push Switch ON 12 1 23 ON 1 23 + 12 CW CW Drives 3-13pcs LED per channel x 4CH CCT remote C4 for single color Push Switch ON 12 1 23 ON 1 23 AC100-240V Power Supply 12-48VDC Constant Voltage CW CW + 12 Drives 3-13pcs LED per channel x 4CH Dimming remote AC100-240V Power Supply 12-48VDC Constant Voltage Note: 1. The LED quantity at each channel can be different, the controller could auto check and output a proper voltage to each channel according to its LED quantities. 2. The controller works on buck mode, the voltage of power supply should be greater than the total voltage of the seried LEDs. Push Dim Single color Dual Color RGB RGBW Click Double Click Long press(>1s) from OFF Long press(>1s) from ON Click Double Click Long press(>1s) from OFF Long press(>1s) from ON Click Double Click Long press(>1s) from OFF Long press(>1s) from ON Click Double Click Long press(>1s) from OFF Long press(>1s) from ON ON/OFF Turn on at 100% or 10%(night light) and vice-versa Dimming UP/DOWN Dimming UP/DOWN ON/OFF Turn on at 100% or 10%(night light) and vice-versa Color temperature UP/DOWN (turn off and turn on to return dimming) Dimming UP/DOWN ON/OFF Change from color mode to white mode(RGB mixed) and vice-versa If on color mode change rotation speed; If on white mode dimming UP/DOWN If on color mode start/stop color rotation; If on white mode dimming UP/DOWN ON/OFF Change between color mode, white mode(W channel) and color+W mode If on color mode change rotation speed; If on white mode or color+W mode, W dimming UP/DOWN If on color mode start/stop color rotation; If on white mode or color+W mode, W dimming UP/DOWN Color rotation: We can select 4 rotation speed: 10 flash/s means 6 seconds color rotation, 5 flash/s means 30 seconds color rotation, 2 flash/s means 1 minute color rotation, 1 flash/s means 6 minutes color rotation. User Manual Ver 2.0.0 C4 RGBW/RGB/CCT/Dimming 4 Channel LED RF Controller Match Remote Control (two match ways) End user can choose the suitable match/delete ways. Two options are offered for selection: Use the controller's Match key Match: Short press match key, immediately press on/off key (single zone remote) or zone key (multiple zone remote) on the remote. The LED indicator fast flash a few times means match is successful. Delete: Press and hold match key for 5s to delete all match, The LED indicator fast flash a few times means all matched remotes were deleted. Use Power Restart Match: Switch off the power, then switch on power, repeat again. Immediately short press on/off key (single zone remote) or zone key (multiple zone remote) 3 times on the remote. The light blinks 3 times means match is successful. .DSwelietcteh: off the power, then switch on power, repeat again. Immediately short press on/off key (single zone remote) or zone key (multiple zone remote) 5 times on the remote. The light blinks 5 times means all matched remotes were deleted. RGB/RGBW dynamic mode list No. Name No. Name 1 RGB jump 6 RGB fade in and out 2 RGB smooth 7 Red fade in and out 3 6 color jump 8 Green fade in and out 4 6 color smooth 9 Blue fade in and out 5 Yellow cyan purple smooth 10 White fade in and out Dual color control CH1,CH3=Warm white LED CH2,CH4=Cool white LED Each channel can supply up to 10W(@350mA, 30V) and white balance can be controlled as such: Color temperature Power distribution Cool white CH1=0W,CH2=10W CH3=0W,CH4=10W Neutral white CH1=5W,CH2=5W CH3=5W,CH4=5W Warm white CH1=10W,CH2=0W CH3=10W,CH4=0W Linear dual color tuning Dimming curve for CCT Dimming curve for RGBW/RGB/DIM Warm white(Min. 2700K) Neutral white(4000K) Cool white(Max. 6500K) 110000 9900 8800 7700 6600 5500 4400 3300 2200 1100 Gamma=1.0 PPW WMM dduuttyy((%%)) PWM duty(%) 100 Gamma=1.6 90 80 70 60 50 40 30 20 10 Recommended CCT range 10 20 30 40 50 60 70 80 90 100 Brightness(%) 10 20 30 40 50 60 70 80 90 100 Brightness(%) Fade in and Fade out Setting Long press match key 5s, then short press match key 3 times, The lighting effect will be set to the fade in and fade out in 3s, the indicator light of LED controller blinks 3 times. Long press match key 10s, restore factory default parameter, the light on/off time restores to 0.5s. Page 2Corel PDF Engine Version 16.1.0.843 CorelDRAW X6