PLT Solutions PLTS-20126 LED T8 Ballast Bypass: GLASS
PLTS-20126
DESCRIPTION
Eliminate ballast maintenance costs and compatibility issues by retrofitting existing fluorescent fixtures with these ballast bypass LED T8 tubes.
FEATURES
- Frosted glass lens reduces visual glare
- Suitable for use in totally enclosed fixtures
- Instantaneous full light output upon power-up
- Operates directly off of line voltage, no ballast needed
- Solid state replacement for 2 ft. F17T8 tubes
- Delivers 1150 Lumens per Watt for highly efficient performance
- Can be used with select emergency drivers; see Emergency Drivers section for full list of compatible products
- Ballast must be removed and fixture rewired for single or double-ended operation during installation; see installation instructions for more information
LISTINGS
- UL Listed for damp locations
- RoHS
- FCC Part 15 Class B
- DesignLights Consortium® 5.1 Standard - meets the requirements for the highest DLC qualification for efficacy and lumen maintenance; DLC PN - PLTSP4M24
WARRANTY
5 year limited warranty; see pltsolutions.com for warranty details
APPLICATIONS
- Office Lighting
- High Bays
- Industrial Strips
- Warehouses
- Stairwells
- Cold Storage
PERFORMANCE SUMMARY
| Item # | Length | Lumens | Watts | LPW | CCT | CRI | Beam | Envelope | LED L70 Life Hours | DLC Level | DLC # |
|---|---|---|---|---|---|---|---|---|---|---|---|
| PLTS-20126 | 2' | 1150 | 9W | 128 | 4000K | 82 | 210° | Glass | ≥100,000 | 5.1 Standard | PLTSP4M24 |
ELECTRICAL
| Power Consumption | 9 Watt |
| Lumens | 1150 |
| Efficacy (LPW) | 128 |
| CRI | 82 |
| Beam | 210° |
| CCT | 4000K |
| LED L70 Life Hours | ≥100,000 |
| Power Factor | 0.9 |
| THD | <20% |
| Input Voltage | 120-277V |
| Operating Temperature | -4°F to 113°F (-20°C to 45°C) |
CONSTRUCTION
| Base | Medium Bi-Pin |
| Lens | Frosted |
LISTINGS
| Certifications | UL Listed; FCC; DLC |
| Material Usage | RoHS - No mercury or lead |
| Environment | Suitable for Damp Locations |
EMERGENCY DRIVERS
| Item # | Description |
|---|---|
| PLTS-20116 | 5W Emergency Driver |
| PLTS-20117 | 10W Emergency Driver |
WIRING DIAGRAM
0-10V continuous dimming by selected Dimming Mate. Please refer to the wiring diagram below. Dimmable via an external accessory in definition of DLC V5.1.
Diagram showing wiring connections for a ballast bypass LED T8 tube. It includes connections for Line (L), Neutral (N), Dim mate (Purple/Gray), and Load. The diagram illustrates a direct connection from Line and Neutral to the tube, with a separate 0-10V dimming control connected to the Dim mate input.
DIMENSIONS
A diagram showing the dimensions of the LED T8 tube. The overall length is 23.67 inches, and the diameter is 1 inch. Labels A, B, and C indicate different points along the tube for measurement.
Length: 23.67"
Diameter: 1"
WARNINGS
- Not for use with ballasts.
- Minimum compartment dimensions: 24.02" x 13.39" x 1.77"
