Product Information Sheet
COMMISSION DELEGATED REGULATION (EU) 2019/2015 with regard to energy labelling of light sources
Supplier Information
Supplier's name or trade mark: Livarno Home
Supplier's address: OWIM GmbH & Co. KG, OWIM GmbH & Co. KG Stiftsbergstraße 1 74167 Neckarsulm Amtsgericht Stuttgart: HRA 721742
Model Information
Model identifier: HG11933E
Type of Light Source
| Lighting technology used: | LED | Non-directional or directional: | NDLS |
| Light source cap-type (or other electric interface): | E14 | Mains or non-mains: | MLS |
| Colour-tuneable light source: | No | Connected light source (CLS): | No |
| High luminance light source: | No | Envelope: | No |
| Anti-glare shield: | No | Dimmable: | No |
Product Parameters
General product parameters:
| Energy consumption in on-mode (kWh/1000 h), rounded up to the nearest integer | 5 | Energy efficiency class | F |
| Useful luminous flux (фuse), indicating if it refers to the flux in a sphere (360º), in a wide cone (120º) or in a narrow cone (90º) | 470 in Sphere (360º) | Correlated colour temperature, rounded to the nearest 100 K, or the range of correlated colour temperatures, rounded to the nearest 100 K, that can be set | 2 700 |
| On-mode power (Pon), expressed in W | 4,9 | Standby power (Psb), expressed in W and rounded to the second decimal | - |
| Networked standby power (Pnet) for CLS, expressed in W and rounded to the second decimal | - | Colour rendering index, rounded to the nearest integer, or the range of CRI-values that can be set | 90 |
| Outer dimensions without separate control gear, light- | |||
| Height | 105 | Spectral power distribution in the range 250 nm to 800 nm, at full-load | See image in last page. |
| Width | 37 | ||
| Depth | 37 | ||
Parameters for LED and OLED light sources:
| R9 colour rendering index value | 43 | Survival factor | 0,90 |
| the lumen maintenance factor | 0,96 |
Parameters for LED and OLED mains light sources:
| displacement factor (cos φ1) | 0,96 | Colour consistency in McAdam ellipses | 6 |
| Claims that an LED light source replaces a fluorescent light source without integrated ballast of a particular wattage. | -(b) | If yes then replacement claim (W) | - |
| Flicker metric (Pst LM) | 0,1 | Stroboscopic effect metric (SVM) | 0,1 |
Spectral Power Distribution Description
The graph displays the spectral power distribution of the light source across the visible spectrum. The x-axis represents wavelength in nanometers (nm), ranging from approximately 380 nm to 780 nm. The y-axis indicates spectral power, with a maximum value of 1.2, where 1.0 corresponds to 3.205e+001mW/nm. The distribution shows distinct peaks in the blue, green, yellow, and red regions, characteristic of an LED light source, indicating a broad spectrum of visible light emission.
Additional Information
Model placed on the Union market from: 19/08/2024.
EPREL registration number: 1950372
Supplier (Manufacturer): OWIM GmbH & Co. KG
Customer care service Name: OWIM GmbH & Co. KG
Customer care service Email: info@owim.com
Customer care service Address: OWIM GmbH & Co. KG Stiftsbergstraße 1 74167 Neckarsulm Amtsgericht Stuttgart: HRA 721742
EPREL Website: https://eprel.ec.europa.eu/qr/1950372
Customer Care Phone: +497132942499
