Support for Sony products | Sony USA
Instruction Manual for SONY models including: SA-SW5, Optional Wireless Subwoofer, Wireless Subwoofer, SA-SW5, Subwoofer
Sony SA-SW5 Wireless powered subwoofer for Sony HT-A7000 and HT-A5000 sound bars at Crutchfield
File Info : application/pdf, 6 Pages, 2.50MB
DocumentDocumentSubwoofer
Operating Instructions
SA-SW5
5-027-345-12(1) ©2021 Sony Corporation Printed in Malaysia
Owner's Record
The model and serial numbers are located on the rear of the subwoofer. Record the serial numbers in the space provided below. Refer to them whenever you call upon your Sony dealer regarding this product.
Model No. SA-SW5
Serial No.
Rear
About compatible
models for the
subwoofer
The SA-SW5 subwoofer works only with the specified model. For information about compatible models, visit Sony's website. In these Operating Instructions, the operations are described for the subwoofer used with the compatible model HT-A7000 or HT-A9.
Parts and Controls
Front
Æ (power) button LINK button AC inlet
Installation
The following illustration is the installation example to use the subwoofer with the compatible model HT-A7000 and optional rear speakers.
Power indicator Flashes slowly (green): The subwoofer is attempting to automatically connect to a compatible model. Lights up (green): The subwoofer is connected to a compatible model. Flashes twice repeatedly (green): The subwoofer is attempting to manually connect to a compatible model. Flashes/lights up (amber): The software is updating. Lights up (red): The subwoofer is in standby mode. Turns off: The subwoofer is turned off.
Slit
Note The brightness of the power indicator syncs with the DIMMER settings of a compatible model.
SA-SW5
1 Install the subwoofer in the place that you
want. You can install the subwoofer in the place that you want because the output sound from it has no directivity. The above illustration is the example for installation of the subwoofer. Note Install the subwoofer with the slit on the bottom, as shown in the "Parts and Controls" illustration. The subwoofer is not designed to be installed in a different orientation.
Connection
Tip You can connect the optional rear speaker with a compatible model in the following way when installing it too.
1 Turn on a compatible model.
2 Connect the AC power cord (mains lead)
If Wireless Transmission is Unstable
(supplied) to the subwoofer, and then connect
the cord to the AC outlets (mains).
If you use multiple wireless systems, such as a
wireless LAN, the wireless signals may become
unstable. In this case, the transmission may be
improved by changing the following setting.
The following operation is described for the
[fil ECJm:=== . .
subwoofer used with the compatible model HT-A7000 or HT-A9. Use the remote control supplied with the compatible model HT-A7000 or HT-A9 when
performing this operation.
If you use other compatible models, refer to the
3 Make sure that the power indicator on the
Operating Instructions supplied with them.
subwoofer lights in green. When the power indicator lights in green, the connection between the subwoofer and a compatible model is established.
1 Press HOME.
The home menu appears on the TV screen.
2 Select;;; [Setup] - [Advanced Settings] on the
For the cases below, follow the steps under
home menu.
"Performing a Manual Connection" to connect the3 subwoofer to a compatible model. - When you use multiple compatible models and
Select [Speaker Settings] - [Wireless Speaker Settings] - [RF Channel].
4 want to specify the model to which you wish to Select the setting you want.
connect the subwoofer.
· [On] (default setting): Normally select this. The
- If you have previously connected other
system automatically selects the better channel
subwoofers to the compatible model.
for transmission. Stronger mode for wireless
- If you cannot connect the subwoofer to a
interference.
compatible model automatically for any other
· [Off]: The system selects a channel from the
reason.
limited frequency band to prevent external
wireless interference. If sound dropping occurs
while [On] is selected, it may be improved by
selecting [Off].
If the input sources contain very little bass sound components (i.e., a TV broadcast), the sound from the subwoofer may be difficult to hear. You can check the subwoofer sound by emitting the test tone.
Set the night mode to off. For details, refer to the Operating Instructions supplied with a compatible model.
If you change the [RF Channel] setting from [Off] to [On], it may take 1 minute for the sound to be output.
Sound skips or has noise.
If there is a device nearby that generates electromagnetic waves, such as a wireless LAN or a microwave oven in use, locate the subwoofer and a compatible model apart from it.
If there is an obstacle between the subwoofer and a compatible model, move or remove it.
Locate the subwoofer and a compatible model as close as possible.
Change the [RF Channel] setting to [Off], and then change to [On] again.
Switch the network connection of the TV or Blu-ray Disc player from wireless to wired.
Change the [Wireless Playback Quality] setting to [Connection].
Specifications
,1,,
-0-
"1' ~
Note · If you change the [RF Channel] setting from [Off] to
[On], it may take 1 minute to reconnect. · A compatible model may not meet this setting
depending on countries/regions where you purchase it.
Troubleshooting
If you experience any of the following difficulties
Performing a Manual Connection
while using the subwoofer, use this troubleshooting guide to help remedy the problem before requesting
The following operation is described for the subwoofer used with the compatible model HT-A7000 or HT-A9. Use the remote control supplied with the compatible model HT-A7000 or HT-A9 when performing this operation. If you use other compatible models, refer to the Operating Instructions supplied with them.
1 Press HOME.
repairs. Should any problem persist, consult your nearest Sony dealer. Be sure to bring all of your subwoofer, a compatible model and optional rear speakers (not supplied) even if it seems as though only one has a problem, when you request to repair. The following solutions are described for the subwoofer used with the compatible model HT-A7000 or HT-A9.
The home menu appears on the TV screen.
If you use other compatible models, refer to the
2 Select;;; [Setup] - [Advanced Settings] on the
home menu.
3 Select [Speaker Settings] - [Wireless Speaker
Settings] - [Start manual linking]. The [Start manual linking] screen appears on the TV screen.
4 Press LINK on the subwoofer.
Operating Instructions supplied with them.
No sound or only a very low-level sound is heard from the subwoofer. Press SW .L'.l (volume)+ or BASS+ on the remote
control of a compatible model to increase the subwoofer volume. Make sure that the power indicator on the subwoofer is lit in green.
The power indicator of the subwoofer that had If the power indicator on the subwoofer does not
LINK pressed flashes twice repeatedly in green.
light, try the following.
5 Select [Start].
The manual connection starts.
The connecting process appears on the TV screen. To cancel the manual connection, select [Cancel].
6 When [Subwoofer] display [Connected], select
- Make sure the AC power cord (mains lead) of the subwoofer is connected properly.
- Press 6 (power) of the subwoofer to turn on the
power.
If the power indicator on the subwoofer flashes slowly in green or lights in red, try the following.
[Finish].
- Move the subwoofer to a location near a
7 Press 8 (enter).
The manual connection is established and the
power indicator of the subwoofer lights in green.
compatible model so that the power indicator on the subwoofer lights in green. - Follow the steps in "Performing a Manual Connection."
Note
- Check the wireless connection status. For details,
· If you perform [Start manual linking], [Link mode]
refer to the Operating Instructions supplied with
of [Wireless Speaker Settings] is set to [Manual]
a compatible model.
automatically.
If the power indicator on the subwoofer flashes in
· Only the speakers for which [Connected] has been red, press 6 (power) of the subwoofer to turn off
displayed in Step 6 connect to a compatible model. the power and check whether the ventilation holes
If the subwoofer is not properly connected,
of the subwoofer is blocked or not.
perform the operation again from Step 1.
Amplifier section
U.S. models: POWER OUTPUT AND TOTAL HARMONIC DISTORTION: (FTC) With 2 ohms loads, from 28 - 200 Hz; rated 130 W, minimum RMS power, with no more than 1% total harmonic distortion from 250 mW to rated output.
POWER OUTPUT (reference) 300 W (at 2 ohms, 100 Hz)
Canadian models: POWER OUTPUT (reference)
300 W (at 2 ohms, 100 Hz)
Speaker system Subwoofer speaker system, Passive radiator type
Speaker 180 mm (71/8 in.) cone type 200 mm (7 7/8 in.) x 300 mm (11 7/8 in.) cone type, Passive radiator
Power requirements 120 V AC, 60 Hz
Power consumption On:43W Standby mode: 1 W or less Turned off: 0.5 W or less
Dimensions (approx.) (w/h/d) 277 mm x 409 mm x 422 mm (11 in x 161/8 in x 16 5/8 in) (not including projection portion)
Mass (approx.) 13.0 kg (28 lb 11 oz)
Wireless transmitter/receiver section
Communication system Wireless Sound Specification Version 4.0
Frequency band 5 GHz
Modulation method OFDM
Included items
· Subwoofer (1) · AC power cord (mains lead) (1) · Operating Instructions (1)
Important information on software
For the customers in the U.S.A.
NOTE: Thi s subwoofer has been tested and found to comply with the limits for a Class B digital device, pursuant to
This product contains software that is subject to the Part 15 of the FCC Rules. These limits are designed to
GNU General Public License ("GPL") or GNU Lesser
provide reasonable protection against harmful
General Public License ("LGPL''). These establish that customers have the right to acquire, modify, and redistribute the source code of said software in accordance with the terms of the GPL or the LGPL.
For the method to confirm the GPL, LGPL and other software licenses contained in the subwoofer, please refer to the Operating Instructions of a compatible model. When you use the compatible model HT-A7000 or HT-A9, please refer to [Software License Information] under~ [Setup] - [Advanced Settings] - [System Settings] on the home menu.
interference in a residential installation. This subwoofer generates, uses and can radiate radio frequency energy and, if not in stalled and used in accordance with the instruction s, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If thi s subwoofer does cause harmful interference to radio or television reception , which can be determined by turning the subwoofer off and on, the user is encouraged to try to correct the interference by one or more of the following measures: - Reorient or relocate the re ce iving antenna.
You may find a copy of the relevant sou rce code as required under the GPLv2 (and other licenses) at https:// oss.sony. net/Products/Linu x
- Increase the sepa ration between the subwoofer and receiver.
- Connect the subwoofer into an outlet on a circuit different from that to which the receiver is
You may obtain the source code as required by the
connected.
GPLv2 on a physical medium from us for a period of - Consult the dealer or an experienced radio/TV
three years after our last shipment of this product by technician for help.
applying through the form at https:// oss.sony. net/Products/Linux Thi s offer is valid to anyone in receipt of this information.
If you have any questions about this subwoofer: Visit: www.sony.com/electronics/support Contact: Sony Customer Information Service Center at 1-800-222-Sony(7669)
Please note that Sony cannot answer or re spond to Write: Sony Customer Information Service Center
any inquiries regarding the content of this source
12451 Gateway Blvd. , Fort Mye rs , FL 33913
code.
Supplier's Declaration of Conformity
All other trademarks are trademarks of their
Trade Name: SONY
respective owners.
Model: SA-SW5
Responsible Party: Sony Electronics Inc.
WARNING
Address: 16535 Via Esprillo, San Diego, CA 92127 U.S.A.
To reduce the ri sk of fire or electric shock, do not expose this subwoofer to rain or moisture.
Telephone Number: 858-942-2230 This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions:
The subwoofer is not disconnected from the mains (1) This device may not cause harmful interference,
as long as it is connected to the AC outlet, even if the and (2) this device mu st accept any interference
subwoofer itself has been turned off.
received, including interference that may cause
undesired operation. To reduce the ri sk of fire, do not cover the ventilation
opening of the subwoofer with newspapers,
CAUTION
tablecloths , curtains, etc.
You are cautioned that any change s or modifications
Do not expose the subwoofer to naked flame sources not expressly approved in this manual could void
(for example, lighted candles).
your authority to operate this subwoofer.
To reduce the ri sk of fire or electric shock, do not
This subwoofer must not be co-located or operated
expose this subwoofer to dripping or splashing, and in conjunction with any other antenna or transmitter.
do not place objects filled with liquids, such as vases, on the subwoofer.
As the mains plug is used to disconnect the subwoofer from the mains, connect the subwoofer to an easily accessible AC outlet. Should you notice an abnormality in the subwoofer, disconnect the main s plug from the AC outlet immediately.
Thi s subwoofer complies with FCC radiation exposure limits set forth for an uncontrolled environment and meets the FCC radio frequency (RF) Exposure Guidelines. This subwoofer should be in stalled and operated keeping the radiator at least 20cm or more away from person's body.
Compliance with FCC requirement 15.407(c)
Do not install the subwoofer in a confined space, such as a bookcase or built-in cabinet.
Data transmi ssion is always initiated by software, which is the passed down through the MAC, through
the digital and analog baseband, and finally to the
Do not place this product close to medical RF chip. Several special packets are initiated by the
devices.
MAC. These are the only ways the digital baseband
This product (including accessories) has magnet(s) portion will turn on the RF tran smitter, which it then
which may interfere with pacemakers, programmable turns off at the end of the packet. Therefore, the
shunt valves for hydrocephalus treatment , or other transmitter will be on only while one of the
medical devices. Do not place this product close to aforementioned packets is being tran smitted. In
persons who use such medical devices. Consult your other words, this device automatically discontinue
doctor before using this product if you use any such transmission in case of either absence of information
medical device.
to tran smit or operational failure.
Indoor use only.
Frequency Tolerance: ±20 ppm or less
For the customers in Canada
This subwoofer contains licence-exempt tran smitter( s)/receiver(s) that comply with Innovation, Science and Economic Development Canada's license-exempt RSS(s). Operation is subject to the following two conditions: (1) This subwoofer may not cause interference; and (2) This subwoofer must accept any interference,
including interference that may cause undesired operation of the subwoofer.
This subwoofer complies with ISED radiation exposure limits set forth for an uncontrolled environment and meets RSS-102 of the ISED radio frequency (RF) Exposure rules. This subwoofer should be installed and operated keeping the radiator at least 20cm or more away from person's body.
5.15 - 5.35 GHz band is restricted to indoor operations only.
Data transmission is always initiated by software, which is the passed down through the MAC, through the digital and analog baseband, and finally to the RF chip. Several special packets are initiated by the MAC. These are the only ways the digital baseband portion will turn on the RF transmitter, which it then turns off at the end of the packet. Therefore, the transmitter will be on only while one of the aforementioned packets is being transmitted. In other words, thi s device automatically discontinue transmission in case of either absence of information to transmit or operational failure.
Precautions
On safety
· Sho uld any solid object or liquid fall into the subwoofer, unplug the system and have it chec ked by qualified personnel before operat ing it any further.
· Do not climb on the subwoofer, as yo u may fall down and injure you rse lf, or the subwoofer damage may result.
On power sources
· Before operat ing the subwoofer, check that the ope rating vo ltage is identi ca l to your loca l power supp ly. The operating vo ltag e is indi cated on the nam ep late at the rear of the subwoofer.
· If you are not going to use the subwoofer for a long time, be sure to disconnect the subwoofer f ro m the wa ll outl et (ma in s). To disconnect the AC power cord (ma ins lead ), grasp the plug itself; never pull the cord.
· One blade of the plug is w ider than the other for the purpose of safety and w ill fit into th e wa ll outlet (mains) only one way. If you are unabl e to insert the plug fully into the outlet, contact your dealer.
· AC power cord (ma ins lead ) must be changed on ly at a qualified service shop.
On heat buildup
· Although the subwoofe r heats up during ope rati on, this is not a malfunction. If you co ntinuously use this subwoofer at high vo lume, the subwoofer temperature at the rear and bottom rises considerably. To avoid burning yourself, do not touch the subwoofer.
On placement
· Do not place the subwoofer near heat sources or in a place subject to direct sunlight, excessive dust, or mechanical shock.
· Do not place metal objects other than a TV around the subwoofer. Wireless functions may be unstable.
· If the subwoofer is being used in comb ination w ith a TV, VCR, or tape deck, noise may result and picture quality may suffer. In such a case, place the subwoofer away from the TV, VCR, or tape deck.
· Use ca uti on w hen placing the subwoofer on a surface that ha s been spec ially treated (with wax, oil , polish, etc.), as staining or discoloration of the surfa ce may result.
· The speakers of this subwoofer are not of magnetically shielded type. Do not place magnetic cards on the subwoofer or near it.
If you encounter color irregularity on a nearby TV screen
Co lor irregularities may be observed on ce rtain types of TV sets.
On cleaning
Clean the subwoofer w ith a soft, dry clot h. Do not use any type of abras ive pad, scouring powder, or so lvent such as alcohol or benzine.
If you have any question or problem concern ing you r system, please co nsult your nearest Sony dealer.