Specifications
Acoustic & Electrical Specifications
| Nominal Impedance | 4 ohms |
| Frequency Range (-10 dB) | 41 Hz to 18 kHz |
| Frequency Response (±3 dB) | 49 Hz to 16 kHz |
| Coverage Pattern | 60° x 60° |
| Passive Crossover | 1.75 kHz |
| Transducer Power Ratings |
LF: 1200 W (4800 W Peak, 100 hrs) MF: 350 W (1400 W peak), 100 hrs HF: 75 W (300 W peak), 2 hrs (AES) |
| Long-Term System Power |
Bi-amp Passive: 1200 W (4800 W peak) M/HF: 300 W (1200 W peak) 100 hrs.Rating (IEC) |
| Maximum SPL |
Tri-amp mode: LF: 128 dB-SPL cont avg (134 dB peak) MF: 135 dB-SPL cont avg (141 dB peak) HF: 135 dB-SPL cont avg (141 dB peak) Passive mode: 135 dB-SPL cont avg (141 dB peak) |
| System Sensitivity (1W @ 1m) | Passive Mode: 110 dB-SPL (M/H only) |
System Components
| Component | Details |
|---|---|
| Cabinet | Enclosure (Not For Sale) |
| Grille | 352235-001 (BK), 352235-003 (WH) |
| Low Frequency Driver | 2 x 2206H 300 mm (12 in) driver with 100 mm (4 in) voice coil |
| D.C.Resistance (LF Driver) | 5.3 ohms +/- 10% (each device) |
System Components (Continued)
| Component | Details |
|---|---|
| Mid Frequency Driver | CMCD-82H cone mid-range compression driver with integral 200 mm (8 in) Differential Drive® dual 75 mm (3.0 in.) voice coil driver |
| D.C.Resistance (MF Driver) | 5.1 ohms +/- 10% |
| High Frequency Driver | 2432H, 38 mm (1.5 in) exit compression driver with 75mm (3.0 in.) voice coil |
| D.C.Resistance (HF Driver) | 4.0 ohm +/- 0.2 ohm |
| Waveguides |
MF: PT-N66MF-1 600 x 600 mm (24 x 24 in) HF: PT-H66HF-1 300 x 300 mm (12 x 12 in) |
Aural Sweep Test Specifications
| Test | Conditions |
|---|---|
| A. System Aural Sweep Test | 7.0V Input, 50 Hz to 21 kHz |
| B. L.F. Aural Sweep Test | 10.0V Input, 20 Hz to 1.0 kHz (each) |
| B. M.F. Aural Sweep Test | 7.0V Input, 20 Hz to 1 kHz |
| C. H.F. Aural Sweep Test | 3.0V Input, 300 Hz to 1 kHz |
Physical Specifications
| Specification | Value |
|---|---|
| Enclosure Dimensions (H x W x D in vertical orientation) | 991 x 673 x 706 mm (39.0 x 26.5 x 27.8 in) |
| Net Weight | 77.0 kg (170.0 lb) |
Warranty Information
Refer to Warranty Statement posted on line.
Package Contents
***PACKAGING NOT FOR SALE***
- Warranty Card (59660)
- Carton (352163-001)
- Filler (2) (352164-001)
- Microfoam (8) (49790P)
Wiring Diagram
The wiring diagram illustrates the connections for the loudspeaker system. It shows the routing of signals to the Mid Frequency Driver (2169H), High Frequency Driver (2432H), Low Frequency Speaker (2206HPL), and the Network Assembly (5041294). Wire color codes such as YEL/BLK, WHT/BK, WHT, YEL, GRN/BK, and GRN are indicated, along with connector labels like CON1 and CON2.
Component Exploded View
The exploded view provides a detailed visual breakdown of the JBL PD6322/66-WH loudspeaker system. It displays all the individual components and their relative positions, aiding in understanding the assembly and internal structure of the unit.
Component Parts List
| Item | Part No. | Qty | Description |
|---|---|---|---|
| 10 | 352085-001 | 2 | GRILLE STICK, TOP/BOTTOM, PD |
| 11 | 352084-001 | 2 | GRILLE STICK, LEFT/RIGHT, PD |
| 12 | 339111-001X | 1 | M/I, 2169H |
| 13 | 365512-001X | 1 | M/I, 2432H |
| 14 | 5041294 | 1 | NTWRK, PD6200/66 + PD6322/66 |
| 15 | 339335-001 | 1 | INPUT PLATE, NL8 |
| 16 | 443454-001 | 1 | WAVEGUIDE, PT-H66HF |
| 17 | 5036860 | 1 | WAVEGUIDE, PT-N66MH-1 |
| 18 | 352235-001 | 1 | GRILLE, BLACK |
| 18 | 352235-003 | 1 | GRILLE, WHITE |
| 19 | 339400-001 | 1 | LOGO, GRILLE |
| 20 | 381-00023-01 | 10 | MOUNTING SUPPORT, 90 DEG 2X M10 |
| 21 | 352051-001 | 20 | BOLT, M10 X 25MM, HEX (BLACK) |
| 21 | 352051-002 | 20 | BOLT, M10 X 25MM, HEX (WHITE) |
| 22 | 352257-001 | 1 | GASKET,HORN TO PHASE PLUG |
| 24 | 339484-001 | 1 | SCREEN, MIDRANGE PHASE PLUG |
| 25 | 339403-001 | 1 | GASKET, PHASING PLUG |
| 26 | 350307-001 | 1 | GASKET 8" |
| 27 | 61861 | 36 | T-NUT, 10-32 |
| 28 | 804-41110-16 | 28 | SCR, 10-32X1, PAN, PH, BLK |
| 29 | 882-41110-10 | 51 | SCR, 6 X 5/8, PAN, PH, PB, BLK ZINC, LCS |
| 30 | 882-51110-12 | 22 | SCR, 6 X 3/4, OV, PH, PTCL, BLK ZC, LCS |
| 32 | 5041671 | 1 | LABEL, INPUT NL8, PD6322 |
| 33 | 76168 | 1 | WASHER, BLK.175ID.75OD |
| 34 | 365201-001 | 1 | COMPRESSION SPRING, GRILLE |
| 36 | 350689-001 | 1 | PUSH NUT, 7/16" GRILL LOGO |
| 38 | 804-41110-20 | 4 | SCR, 10-32X1.25, PAN, PH, BLK ZINC, LCS |
| 56 | 75815 | 4 | STUD, 1/4-20 X 1.5"LG (WHITE) |
| 56 | 705-90002-16 | 4 | SCR, 1/4-20 X 1, SKT SET, BLK (BLACK) |
| 57 | 338471-002 | 1 | PHASING PLUG, 12" |
| 59 | 834-30010-00 | 4 | NUT, 1/4-20, KEPS, BLK ZINC, LCS, RIGHT |
| 61 | 2206HPL | 2 | M/I 2206HPL |
| 63 | 353210-001 | 1 | LF WIRE ASSY |
| 65 | 804-41110-24 | 8 | SCR, 10-32X1-1/2, PAN, PH, BK |
Network Schematic
The document includes a network schematic (5041294) detailing the internal crossover network of the JBL PD6322/66-WH. It illustrates the connections from input terminals (CON1, CON2) to various circuits via W1-W8, and provides a PCB schematic showing the layout of components. The schematic lists the following electronic components:
| Item # | Designator | Qty | Description | TOL |
|---|---|---|---|---|
| 1 | L1 | 1 | IND, 0.51mH, AIR CORE | 5% |
| 2 | L2 | 1 | IND, 0.64mH, AIR CORE | 5% |
| 3 | L3 | 1 | IND, 1.0mH, STEEL CORE | 5% |
| 4 | L4 | 1 | IND, 1.25mH, STEEL CORE | 5% |
| 5 | C1 | 1 | CAP, 6.70uF, 250V, METALLIZED POLYESTER FILM | 2% |
| 6 | C2 | 1 | CAP, 5.7uF, 250V, METALLIZED POLYESTER FILM | 5% |
| 7 | C3 | 1 | CAP, 9.0uF, 250V, METALLIZED POLYESTER FILM | 5% |
| 8 | C4 | 1 | CAP, 12.0uF, 250V, METALLIZED POLYESTER FILM | 5% |
| 9 | C5 | 1 | CAP, 10.0uF, 250V, METALLIZED POLYESTER FILM | 5% |
| 10 | R1 | 1 | 2 Ohms | 5% |
