Televes NevoSwitch 13-Input Amplifier 27/31dB
The NevoSwitch 13-input amplifier is designed to increase the number of users in an installation by optimizing the signal for terrestrial and satellite reception. It provides approximately 27dB amplification for terrestrial signals and 31dB for satellite signals, with a passive return path.
Key Features
- Compact design
- Zamak construction
- High output level
- Switch for terrestrial preamplifier power (VDC) or OFF
- Individual gain (20dB) and slope (12dB) adjustment
- 12V power supply
- Low consumption
- Color identification for inputs and outputs
Product Details
- Reference:
- 714709
- Logic Reference:
- MS1327VGQ
- EAN13:
- 8424450173510
Physical Specifications
Item | Value |
---|---|
Net Weight | 734.00 g |
Gross Weight | 734.00 g |
Width | 275.00 mm |
Height | 121.00 mm |
Depth | 30.00 mm |
Product Main Weight | 726.00 g |
Technical Characteristics (Ref. 714709)
Characteristic | TERR | SAT | |
---|---|---|---|
Number of Inputs | 13 | 13 | |
Number of Outputs | 13 | 13 | |
Bands | MHz | 950 ... 2400 | |
Bandwidth | 88 ... 862 | ||
Output Level | dBμV | 112 | 119 |
Gain | dB | 27 | 30 |
Signal Regulation | dB | 0 ... 20 | 0 ... 20 |
Slope Adjustment | dB | 0 ... 12 | 0 ... 12 |
Isolation | dB | > 30 | > 30 |
Supply Voltage | Vdc | 12 ... 18 | |
Max. Current Consumption (@12V) | mA | 865 | |
Max. Current Consumption (@18V) | mA | 580 | |
Max. Power Consumption | W | 10.4 | |
Operating Temperature | °C | -5 ... 45 | |
Protection Index (IP) | 20 |
Application Example
The diagram illustrates a typical installation setup for the NevoSwitch amplifier, showing connections for terrestrial and satellite inputs, power supplies (PSU), and multiple NevoSwitch units.
Diagram Description: The diagram shows a central unit labeled "OFFSET LNB QUATTRO" connected to a "Nevoswitch 13x13x16" amplifier. This amplifier is then connected to two other "Nevoswitch 13x13" amplifiers. Each of these is connected to a "PSU" (Power Supply Unit) and a "Nevoswitch 13x13x16" unit. The setup also includes connections for "DIRECT AND RETURN" signals.