MOSEN Electronic Drum User Manual

Function Introduction

Thank you for choosing our electronic drum set. This product is finely crafted and technologically advanced, making it the perfect companion to start your musical journey. Please read this manual carefully before using this instrument.

Key Features:

• Maximum polyphony of 32 notes, with 6 layers of velocity sensitivity
• Support for cymbal choke
• 25 drum kits, with 195 drum sounds
• 10 built-in songs
• Adjustable sensitivity for each drum pad
• Tempo control: 30-280 BPM
• Metronome
• Additional features: Parameter memory, reset function
• LED display
• Connections: USB MIDI, headphone jack, line-in, line-out
• Ability to create and edit custom drum kits

Diagram Description: The electronic drum set includes a control module, various drum pads (snare, tom-toms, hi-hat, crash, ride cymbals), and pedals (hi-hat control pedal, bass drum control pedal). Visuals illustrate the drum side, drum skin, how to grab the edge to silence a cymbal, and a hi-hat combination.

Notice: This product is an electronic musical instrument. A slight humming noise from the speakers or headphones when powered on is normal. To avoid interference, keep the device away from radios, televisions, antenna receivers, routers, refrigerators, electric motors, and other sources of radio frequency interference.

Installation Guide

Check the Included Items

Upon opening the package, please immediately check to ensure all items are included. If anything is missing, contact your dealer.

• Control module
• Control module stand
• Hi-hat
• Crash cymbal
• Ride cymbal
• Cymbal support rod (2 pieces)
• Cymbal support rod
• Tom-toms
• Snare drum
• Plastic head fastening screws
• Hi-hat control pedal
• Bass drum control pedal
• Drumsticks
• Connection cables
• Power adapter
• Drum key
• USB cable

Tubes

The tubes are in a separate small package inside the box.

Stand Installation

The stands need to be assembled and the screws tightened to prevent them from falling off. Insert the stands and drum pads into their respective positions and then tighten the screws. Note: The tom and snare have different functions and need to be installed correctly.

Drum Pad Installation

Handle with care to avoid pinching your fingers. According to the diagram, insert the three tom-toms and one snare drum into the tubes and secure with the plastic tightening screws.

Installing Cymbals, Control Module, Pedal Placement

Proceed with caution to avoid pinching your fingers. The diagram shows the placement of cymbals, the control module, and pedals onto the assembled stand.

Connections

After opening the package, please immediately check to ensure all items are included. If anything is missing, contact your dealer. The diagram shows how to connect the components. Insert the parallel port plug into the host box and then into the corresponding striking component hole according to the English label on the head of the connecting cable. Components labeled include: Hi-hat, Crash, Ride, Tom1, Control box, Tom2, Tom3, Snare, Hi-hat pedal, Kick drum pedal.

Control Module Port Diagram

The control module features several ports:

• Port 1: Audio Input Port: Allows the connection of external audio sources (e.g., MP3 players, smartphones) for playback.
• Port 2: Headphone Port: Enables monitoring of playing without disturbing others when not connected to external speakers.
• Port 3: USB MIDI Port: Connects to other MIDI-equipped devices for learning, performing, composing, and storing functionalities. When connected to a computer or tablet, the device's audio output needs to be connected to the drum control module's audio input port to synchronize sound effects.
• Port 4: Audio Output Port: Connects to powered speakers or large sound systems.
• Port 5: Power Cord Connection: Connect the power cord to the module and a 100-240V household electrical outlet. Unplug the power cord and store it properly when the product is not in use for an extended period.

Operation Guide

KIT: Drum Kit Mode

Upon powering on, the device defaults to Drum Kit Mode, indicated by a lit key indicator showing "001" (Drum Kit 1). There are 25 drum kits in total: 1-20 are preset, and U01-U05 are user-created. Drum kits can be adjusted using the number wheel or the [-] or [+] keys.

TRIGGER

Users can adjust trigger parameters such as threshold, sensitivity, and crosstalk control by pressing the [TRIGGER] key. Threshold ranges from 1-10, sensitivity from 1-15, and crosstalk control from 0-9. These can be adjusted via the numerical wheel.

Plus and Minus Keys

Used to select drum kits and return to the KIT page. Pressing both keys for 3 seconds resets to factory settings.

Song

There are 10 built-in songs, displayed as "Sxx" (range 1-10), indicated by a lit key indicator.

Tempo

Pressing the [TEMPO] key enters the tempo adjustment page, displaying "xxx" with a range of 30-280 BPM.

Click (Metronome)

Short press the [CLICK] key to play and stop the metronome. Press and hold the [CLICK] key for 3 seconds to adjust the time signature (e.g., "4-4", representing 4 beats per measure, or time signatures like 1/4-9/4, 1/8-9/8).

Record

Pressing the [REC] key starts recording. The indicator lights up and flashes during recording. Pressing [REC] again stops recording.

Playback Stop

Controls playback and stop for recordings or songs.

Voice

Allows adjustment of sound, volume, and pitch. Parameters are displayed with a lit key indicator. Sound ranges from 1-200, Volume from 0-32, Pitch from -8 to 8, and Transposition from -6 to 6. These can be adjusted via the numerical wheel.

Creating User Drum Kit

Press the VOICE key, then hit a drum pad to change its sound. Navigate through sound, volume, pitch, and transposition settings using the VOICE key and adjust with the encoder. To save, press the number wheel key until U01 flashes, rotate to select a user kit number (U01-U05), and press again to save.

Appendix

Drum Sounds

The appendix lists 195 drum sounds categorized by type:

KICK:

• KICK01 - KICK15

HIHAT:

• CLOSED HH01 - CLOSED HH07
• PEDAL HH01 - PEDAL HH07
• OPEN HH01 - OPEN HH07
• HALF HH01 - HALF HH03
• QUATER HH01 - QUATER HH03
• E_HIHAT1 - E_HIHAT4

SNARE:

• SNARE01 - SNARE19
• SIDESTICK1, SIDESTICK2
• E_SNARE1, E_SNARE2

TOM:

• HITOM1 - HITOM7
• MIDTOM01 - MIDTOM11
• LOTOM1 - LOTOM6
• E_TOM1 - E_TOM4

CYMBAL:

• CRASH01 - CRASH14
• RIDE1 - RIDE3
• RIDEBELL1 - RIDEBELL3
• E_CYMBAL1 - E_CYMBAL6

PERCUSSION:

• HI_Q, SPACEHIT, X-RAY, SLAP, PUSH, PULL, STICK, SQCLCK, CLICK, BELL, CLAP, TAMBRINE, COWBELL1 - COWBELL4, VIBRASLAP, HIBONGO, LOBANGO, MUTED CONGA, HI CONGA, LO CONGA1, LO CONGA2, HI TIMBALE, LO TIMBALE, HI AGOGO, LO AGOGO, CABASA, MARACS, SHORT WHISTLE, LOONG WHISTLE, SHORT GUIRO, LONG GUIRO, CLAVE, HI WOODBLOCK, LO WOODBLOCK, METED CUICA, OPEN CUICA, MUTED TRINGLE, OPEN TRINGLE, SHKER1, SHKER2, JINGLEBELL, BELL TREE, CASTANETS1, CASTANETS2, MUTED SURDO, OPEN SURDO, TALKING DRUM, TABLA1, TABLA2, SNAP, DJEMBE1 - DJEMBE3, CAJON1 - CAJON3, TIMPANI1, TIMPANI2, LOW GONG, E_LCLICKH, E_LCLICKL, TAIKO, BELL, BAN, SIGU, DONG1, DONG2, MID_GONG, PIATTI, SMALL_GONG1, SMALL_GONG2, CN_GONG1, CN_GONG2, ESCRCH, DOWN

Preset Drum Kits

• 01 Funk
• 02 Original
• 03 Metal
• 04 Pop Rock
• 05 Rock
• 06 Songo
• 07 Standard
• 08 Dancehall
• 09 Seesion
• 10 SpeedMetal
• 11 Metal
• 12 ClassicDry
• 13 Modern
• 14 Jazz
• 15 Blues

User Custom Drum Kits

• U01
• U02
• U03
• U04
• U05

Demonstration Songs

• 001 POP
• 002 FUNK
• 003 ROCK
• 004 SAMBA
• 005 DANCE
• 006 DISCO
• 007 SWING
• 008 BALLADE
• 009 COUNTRY
• 010 WALTZ

Product Maintenance

Proper maintenance and protection of this product play a crucial role in extending its lifespan and reducing malfunctions.

• 1. Avoid Heat, Moisture, or Direct Sunlight: Do not expose the product excessively to direct sunlight, or place it near air conditioning units or in extremely hot locations.
• 2. Do not Use Near Television or Radios: This product may cause video or audio interference with televisions and radios. If this occurs, move the product away from the television or radio.
• 3. Do not Clean with Paint, Thinners, or Similar Chemicals: To clean surface stains on the product, use a soft, clean cloth lightly dampened with water or a specific cleaning solution.
• 4. Do not Shake or Subject to Impact: When moving the product, handle it with care. It is strictly forbidden to shake violently or collide with other objects, as this may damage the casing or internal electronic components.

Safety Precautions

Warning: Smoke, Odd Smell, Overheating

If the product produces smoke, emits an odd smell, or overheats, continuing to use it could lead to fire and electric shock. In such cases, immediately perform the following actions: 1. Turn off the power. 2. Unplug the power cord from the electrical outlet. 3. Contact your dealer.

Power Cord Precautions

Improper use of the power cord can lead to fire and electric shock. The following precautions must be observed:

• Use only the designated power cord specified for this product.
• Use only AC power sources with output voltages within the rated voltage range for household use.
• Do not overload wall outlets and extension cords.
• Mishandling the power cord, causing it to become damaged or frayed, can lead to fire and electric shock. Do not place heavy objects on the power cord or subject it to heat. Do not attempt to modify the power cord or bend it excessively. Do not twist or pull the power cord. If the power cord or plug is damaged, replace it with one of the same type and specifications.
• Never touch the power cord or plug with wet hands, as this could lead to electric shock.
• Use the power cord in places where it will not be splashed with water. Water can cause fire and electric shock.
• Do not place vases or any other container filled with water on the product. Water can cause fire and electric shock.
• Do not allow minors to plug or unplug the power cord or touch the connection panel. Minors lack knowledge of electrical safety, which could lead to electric shock.

Important Notices:

• Never place the power cord near stoves or other heat sources.
• When unplugging from the power outlet, do not pull on the power cord; always grasp the plug itself.
• Ensure the power cord is fully inserted into the outlet.
• Before connecting or disconnecting the power cord, always make sure the power is turned off.
• During thunderstorms or when going on trips or leaving for an extended period, unplug the power cord from the wall outlet.
• At least once a year, unplug the power cord from the wall outlet and clean accumulated dust around the plug.

Do Not Dispose of This Product in Fire

Never place this product in fire. Doing so can cause the product to burn and its internal electronic components to explode, leading to fire and injury.

Water and Foreign Objects

Water, other liquids, or foreign objects (such as metal pieces) entering the product can cause fire and electric shock. In such cases, immediately perform the following actions: 1. Turn off the power. 2. If using a power cord for power supply, unplug it from the wall outlet. 3. Contact your dealer.

Disassembly and Modification

Do not disassemble or modify this product in any way. Doing so could lead to electric shock, burns, or other personal injuries. All internal inspections, adjustments, and maintenance should be referred to your dealer.

Dropping or Impact

Using this product after it has been dropped or subjected to a strong impact poses a risk of fire and electric shock. In such cases, immediately perform the following actions: 1. Turn off the power. 2. If using a power cord for power supply, unplug it from the wall outlet. 3. Contact your dealer.

Plastic Bags

Do not let anyone put the plastic bags used for packaging this product over their head or in their mouth, as it poses a risk of suffocation. Families with small children should pay particular attention to this.

Maintain Distance from This Product and Its Stand

Climbing on the stand can cause it to tip over or get damaged, posing a risk. Families with small children should pay particular attention to this.

Placement

Avoid placing this product on uneven surfaces or any other unstable locations. Doing so can cause the product to fall, posing a risk of injury.

Moving the Product

Before moving this product, you must first unplug the power cord from the wall outlet and disconnect all other cables and connections. Failing to do so can result in damage to the cables, leading to fire and electric shock.

Cleaning

Before cleaning this product, you must first unplug the power cord from the wall outlet to avoid the risk of fire and electric shock.

Ports

Only specified devices and equipment should be connected to the ports of this product. Connecting unspecified devices or equipment can cause fire and electric shock.

Location Selection

Avoid placing this product in locations that might lead to fire and electric shock, such as:

• Areas with high temperatures or excessive dust.
• Kitchens or other areas prone to oily smoke.
• Direct sunlight exposure or any other conditions that could cause the product to overheat.

Volume

Do not listen to music at high volumes for long periods. This is especially important when using headphones. Excessive volume can damage your hearing.

Heavy Objects

Do not place heavy objects on this product. Doing so can make the product top-heavy, causing it to tip over or objects to fall off, which could lead to injury.

Proper Stand Assembly

Improper assembly of the stand can cause it to tip over, leading to the product falling and potential injury. Therefore, it is essential to assemble the stand following the instructions provided in the installation guide to ensure the product is securely mounted on its stand.

Safety Symbol Descriptions:

Safety symbols are used to indicate warnings and precautions:

• [General Warning Symbol]: A triangular symbol indicating matters the user should be aware of (e.g., electric shock hazard).
• [Prohibited Action Symbol]: A circle with a diagonal line through it, indicating prohibited actions. The symbol inside or next to the circle indicates the specific prohibited action (e.g., no disassembly).
• [Mandatory Action Symbol]: A circle with a black background, indicating actions that must be complied with. The symbol inside the circle indicates the specific action that must be followed (e.g., unplugging the power cord from the outlet).

Warranty Card

Warranty Terms

1. Faults occurring under normal use of this product are eligible for free warranty service for [Number of] days from the date of purchase. (Note: The specific number of days is missing in the provided text.)

2. To receive warranty service during the warranty period, this warranty card and the purchase receipt must be presented at the time of repair.

3. The following conditions will not be covered by free warranty service:

• A. Damage caused by improper use by the user.
• B. Faults caused by irresistible factors such as fire, flooding, earthquakes, lightning strikes, etc.
• C. Faults caused by unauthorized disassembly.

4. After the warranty period, the company will still provide repair services but will charge a cost-based fee.

Repair Information:

Repair point: [Space for input]

Address: [Space for input]

Contact number: [Space for input]

Maintenance Records