Moment Inc Bluetooth Remote Control Operation Manual

Operating Instructions

1. Flip the switch to ON to start the device. Initially, the fast broadcast light flashes for 8 seconds, followed by the slow broadcast light flashing for 1 second. Then, turn ON the Bluetooth on your mobile phone to search for the Bluetooth device named "Mosment Remote" and pair it. The LED indicator will turn off upon successful Bluetooth connection.
2. Click the "take photo" button to capture photos. Pressing the "take photo" button will cause the LED indicator to flash once.
3. If the Bluetooth is not paired or has been unpaired, the Bluetooth remote control will automatically enter deep sleep mode after 5 minutes. Press any button to resume broadcasting.
4. Toggle the switch to OFF to power down the device.
5. The Bluetooth remote control features memory and automatic connection functionality.

FCC Compliance Information

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.

If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

The device has been evaluated to meet general RF exposure requirements. The device can be used in portable exposure conditions without restriction.

FCC ID: 2AEZQ-200-002