CarPlay & Android Auto Player Manual

Specifications

Power Supply Voltage: 12~14.4V DC, Negative Ground
Max Current Consumption: 15A
Max Output Power: 4X60W

Key Features

HD Display
Stereo Radio
Bluetooth (BT)
CarPlay
Android Auto
MirrorLink
Audio/Video/Picture Playback
Supports USB, BT, Radio, TF Card, FLAC formats.

Before Installation

Thank you for purchasing this product. Before installing in your car, please test the unit using a 12V DC power source (like a car battery).

Testing Method:

Connect the yellow and red wires of the power cord together to the positive pole of the battery.
Connect the black wire to the negative pole of the battery.
Wait for 10 seconds, then press each button to check if the unit boots normally.
If it boots, installation can proceed. If not, re-confirm the steps or contact support.

Rear Interface Description

The rear of the unit features various ports for connectivity:

FUSE 15A
Video Output 1
Rear MIC IN (3.5MM)
Left Audio Output
Right Audio Output
USB Playback
CVBS Input
Radio Antenna
Reversing Video Input
Video Output 2

Wiring Diagram:

Connector B:

Red: ACC (Ignition Switch +12V)
Black: GND (Ground wire B-)
Blue: ANT (Radio Antenna)
Green: ILLUMINATION
Brown: KEY (Steering wheel control)
Yellow: BATTERY (Power Supply +12V)
Pink: REVERSE (Reversing camera)
Orange: BRAKE (Parking brake cable)

Speaker Outputs (Connector A):

White / White-Black striped: Front Speaker
Gray / Gray-Black striped: Rear Speaker
Green / Green-Black striped
Purple / Purple-Black striped

Notes:

The unit turns on normally when the yellow line (B+) and red line (ACC) both receive 12V positive power.
The yellow line (B+) maintains power and the unit's memory function.
Ensure speaker cables are not grounded, shared, or touching each other to avoid sound issues or damage.

Reversing Camera Installation Method

Connect the reverse light wire (typically pink) to the positive terminal of the reverse light. Connect the unit's reverse video input to the camera. If the reversing camera is not installed, do not connect the REVERSE/BACK cable, as this may cause the unit to automatically enter reverse mode.

Machine Fixed Reference Method

Follow the provided steps for securely mounting the unit.

Main Interface

The main interface provides access to various functions:

HOME: Returns to the main interface.
RADIO: Accesses the radio mode.
PhoneLink: Enables CarPlay, Android Auto, or MirrorLink by connecting your phone via USB.
USB: Plays music, video, or pictures from a USB flash drive (Front USB).
USB2: Plays music, video, or pictures from a USB flash drive (Rear USB).
BT: Connects for Bluetooth music playback and calls.
SD: Accesses the Micro SD card for media playback (functionality may vary by model).
AV IN: Connects external audio/video sources.
CCD (Rear Camera): Displays the view from the rear camera.
Calculator: Opens the calculator application.
Clock: Accesses clock settings.
Calendar: Opens the calendar application.
Setup: Navigates to system settings.

Radio Function

Control radio playback with the following options:

◄◄ / ►►: Automatically search for the next/previous station. Long press to manually tune. Long press P1-P6 to save current station.
Pre-stored stations: Access up to 18 saved radio stations by pressing their assigned buttons (P1-P6).
FM: Switch between FM bands (FM1, FM2, FM3).
AS: Automatically search and store all available radio stations.
ST/MO: Select Stereo or Mono reception.
PS: Browse through saved radio stations.
LOC/DX: Switch between local and distant broadcast reception.
EQ Button: Access the EQ sound effect settings.
Back Button: Returns to the previous screen.

Music Function

Manage your music playback:

Previous/Next Track: Navigate between songs.
Pause/Resume Playback: Control music playback.
Loop Playback: Select single song loop or all songs loop.
Playback Modes: Choose between sequential or random play.
Return to File List: Go back to the music file directory.
Playback Progress Bar: Slide to adjust playback position.
EQ Sound Effect Setting: Access audio equalization settings.

Photo Function

View your photos:

Previous/Next Picture: Navigate between images.
Pause/Resume Playback: Temporarily stop or resume viewing.
Zoom In/Out: Adjust the image magnification.
Rotate: Change the image orientation.
Return to File List: Go back to the photo directory.

Video Function

Control video playback:

Previous/Next Track: Skip between video files.
Pause/Resume Playback: Start or stop video playback.
Loop Video Playback: Set video to repeat.
Playback Modes: Choose between sequential or random play.
Return to File List: Go back to the video file directory.

Tip: If a brake warning occurs, disable the brake warning switch in system settings to play videos normally.

BT Function (Bluetooth)

Connect your phone via Bluetooth for music and calls:

Make a call interface: Initiate phone calls.
Contact interface: Access your phone's contact list.
Call history interface: View past calls.
BT Music interface: Play music from your phone.
BT pairing interface: Manage Bluetooth device connections.
Backspace key: Delete characters.
Dial keypad interface: Manually dial numbers.
Answer call key: Accept incoming calls.
End call key: Disconnect calls.
BT Music Prev/Next track: Control music playback.
Pause music/resume playback: Control music playback.

Device Information:

Device Name: "CAR-BT"
PIN Number: "0000" (if required)

Connection Method:

Turn on the unit.
Enable Bluetooth on your mobile phone, search for "CAR-BT", and connect.

AV IN Function

Connect external audio players, such as mobile phones or iPods, through the 3.5MM Front AUX hole.

Steering Wheel Controls

Wiring Method:

Connect the positive pole of the original car's steering wheel button control line to the unit's KEY line, and the negative pole to the unit's GND line.

Learning Method:

Press and hold a function key on the steering wheel, then tap the corresponding function key on the car screen. A constant light on the screen key indicates successful learning.
Repeat for other buttons. Press the confirm button to save settings.
If an error occurs, press the reset button and re-learn.

Phonelink (CarPlay & Android Auto & Mirrorlink)

Project your phone's screen onto the car's display via a USB data cable.

Apple CarPlay (CarPlay)

Connect your iPhone to the unit with a USB data cable.
The unit will automatically enter the CarPlay interface.
To re-enter CarPlay after exiting, press "Phonelink" on the HOME screen.

Android Auto (Auto)

Requirements:

Download and install the "Android Auto" app from Google Play.
Use a mobile phone with Android 6.0 or higher.
Use a valid USB data cable connection.

Connection:

Connect your mobile phone to the unit with a USB data cable.
The unit will automatically enter the Android Auto interface.

Phonelink Modes:

iPhone: Enter Apple CarPlay mode.
iPhone: Enter MirrorLink mode.
iPhone Default: "CarPlay or Mirrorlink" is selected.
Android: Enter MirrorLink mode.
Android: Enter Android Auto mode.
Android Default: "Android Auto or Mirrorlink" is selected.

Mirrorlink (Android & iPhone)

Mirrorlink (Android)

After connecting your Android device via USB, you may be prompted to install Mirrorlink software. Once installed, plug in the data cable again to enter screen mirroring mode. Operation is possible from both the player and phone screens. Sound is transmitted via Bluetooth connection.

Mirrorlink (iPhone)

When connected via USB, your iPhone's screen content is projected onto the car's screen, and audio is transmitted in sync. Touch input is not supported for iPhone MirrorLink.

System Settings

Access and configure various system settings:

Basic Setup:

Vehicle: Basic setup options.
Tuner Region: Select radio area for appropriate frequency.
Wheel: Steering wheel control settings.
Factory Set: Restore factory defaults (requires password "113266").
Equipment: Equipment settings.
Sound Setup: Adjust EQ, Loudness, Balance, and frequency bands.
Display Settings: Adjust Brightness, Contrast, Hue, and Saturation.

Other Settings:

Beep: Toggle key tone on/off.
Reverse Mute: Mute audio when reversing.
Video Warning: Display warning while driving.
Animation: Adjust interface animation effects.
Camera Mirror: Configure camera mirror settings.
Key Light: Adjust key illumination settings.
7 Color Light: Set color light change interval.
Restore Factory: Reset all settings to factory defaults.

Language Settings:

Select the desired language for the system interface (e.g., English, Chinese, French, German, Italian, Japanese, Portuguese).

Time Setting:

Set the Year, Month, Day, Hour, and Minute. Choose between 12-hour and 24-hour time formats.

Remote Control Function

The remote control allows operation of the unit:

Mute: Toggle audio mute.
Mode: Switch between RADIO, AV IN, BT, USB, SD modes.
Power: Turn the unit on/off.
Volume +/-: Adjust audio volume.
Enter / Play / Pause: Confirm selections or control media playback.
Next Track: Skip to the next song/video.
Volume -: Decrease audio volume.
End Call: Disconnect a phone call.
Number Buttons: Input numbers for direct access or dialing.
Menu: Access the main menu.
Previous Track: Skip to the previous song/video.
Answer Call: Accept an incoming call.

Note: Remove the battery insulation paper before first use. If the remote is unresponsive, try cleaning the battery contacts or replacing the battery.

Common Problems and Simple Troubleshooting

1) Unable to Boot Normally

Reason: Incorrect wiring (e.g., only 2 of the 3 power wires connected), blown fuse, or incorrect connection of power wires.
Troubleshooting: Ensure correct wiring (Yellow to +12V, Red to ACC/+12V, Black to GND/-). Check the fuse on the yellow wire. Try twisting yellow and red wires together and connecting to a 12V source. If it boots, the original car wiring may be at fault. If not, the unit may be faulty.

2) Automatic Shut-down

Reason: Incorrect cable connection (e.g., blue cable connected to power), or unstable voltage supply.
Troubleshooting: Verify wiring connections. Test with a stable 12V-5A power supply. If the issue persists, the unit may be faulty.

3) Noise

Reason: Insufficient speaker power or speaker cables are grounded.
Troubleshooting: Use speakers with adequate power. Ensure speaker cables are properly insulated and not grounded.

4) Remote Control Cannot Be Used

Reason: Dead battery in the remote control.
Troubleshooting: Test the remote using a phone camera (point remote at camera, press button; if light appears, battery is okay). Replace the battery if needed.

5) Settings Cannot Be Saved (No Memory)

Reason: Incorrect connection of the yellow and red power wires.
Troubleshooting: Ensure the yellow and red wires are connected correctly together (or as per specific wiring instructions).

6) Car Audio with Bluetooth Not Working

Troubleshooting: On your phone, search for "CAR-BT", connect, and use PIN "0000" if prompted.

7) Unit Emits Smoke

Reason: Internal circuit failure, likely a short circuit.
Troubleshooting: The unit requires professional repair. Do not attempt to replace fuses repeatedly.

8) Sound Adjustment Issues

Adjusting Sound: Use the volume knob.
Equalizer Settings: Access via the volume knob menu (SEL).
Sound Cannot Be Adjusted: Try resetting the unit or unplugging/replugging the power. If the volume knob is physically broken, it may need replacement.

9) No Display of Reversing Video

Reason: Incorrect or missing wiring connections for the camera.
Troubleshooting: Ensure the reverse control line (pink or brown) is connected to the positive pole of the 12V reverse lamp. Connect the camera's power to the reverse lamp positive and the video cable to the unit's reverse video input. Ensure the backup light's positive and negative are correctly connected to the camera.

10) USB Flash Drive Not Playing / Card Slot Issue

USB Playback: Format the USB drive to FAT32 and re-download files.
Card Slot: Ensure the memory card is inserted correctly and the slot is not damaged.

11) FM Radio Not Receiving Stations

Reason: Antenna plug not fully inserted, antenna disconnected, or wiring issue.
Troubleshooting: Ensure the antenna is properly connected. Try searching for stations using AMS or manual tuning. If problems persist, try inserting a metal strip into the antenna port as a temporary antenna.

12) No Sound Right After Installation

Reason: Wiring error or short-circuited speaker wires.
Troubleshooting: Check all speaker wire connections for shorts. Ensure the original car wiring matches the unit's speaker output configuration (each speaker requires two wires).

13) No Sound After a While

Reason: Speaker wires are short-circuited with iron, or the speaker itself is damaged.
Troubleshooting: Disconnect all speaker cables from the unit. Connect an external speaker to the unit's speaker output wires (e.g., gray and purple groups) to test. If sound is present, the car's speaker wiring or speakers are the issue. If no sound, the unit may be faulty.