User Guide for TechSupport models including: Windows 11 Legacy Driver, Windows 11, Legacy Driver, Driver
Pilotes et firmware du FiberMark 24 d'Epilog
Download af drivere og firmware til Epilog Zing
Mises à jour de firmwares Epilog Mini et Helix
File Info : application/pdf, 5 Pages, 1.55MB
DocumentDocument3. Click Network and Internet. Windows 11 - Legacy Driver Installation Before beginning, connect the laser to your computer with an Ethernet cable and turn the machine on. Ethernet Adapter/Port Setup 1. In the search bar at the bottom of the screen, type Settings. 4. Click Advanced Network Settings. 2. Click Open. 5. Select the drop down arrow next to the lasers Ethernet connection. It will often say unidentified network. 1 Driver Install - Windows 11 6. Next to More adapter settings, click Edit. 7. Select Internet Protocol Version 4 (TCP/IP), then click Properties. 9. Click the Subnet Mask field. It will autopopulate with 255.255.255.0. 10. Then click OK. Installing the Driver This guide is for Ethernet installation of the Mini/Helix, Zing, EXT, and older Fusion/M2 drivers. 1. Download the Driver from https://www. epiloglaser.com/tech-support/drivers/ 2. Open the downloaded file and click unzip. 8. Select Use the Following IP address. Type 192.168.3.3 into the IP address. The last digit of this IP address will be different from the IP address of the laser. 3. The Add a Device window will open up. Click The printer that I want isn't listed. 2 Driver Install - Windows 11 To manually launch, open Settings / Bluetooth and Devices / Printers and Scanners / Add a device / The printer I want isn't listed. 4. Select Add a local printer or network printer with manual settings. If you don't know the IP address of the laser please refer to the Laser System Manual. 7. Select Custom and click Settings. 5. Select Create a new port. From the drop down menu, select Standard TCP/IP Port. Click Next. 8. Select LPR protocol. Enter the machine model in Queue Name. Click OK. 6. Deselect Query the printer. Enter the IP address of the laser. The default address is 192.168.3.4. Then click Next. 3 Driver Install - Windows 11 9. Click Next. 12. Click This PC, Local Disk (C:), Open. 10. Click Have Disk. 13. Open the driver file for your machine. 11. Click Browse. 14. Select the .inf file and click Open. 4 Driver Install - Windows 11 15. Click OK. 19. Leave Do not share this printer selected and click Next. 16. Click Next. 20. Click Finish. 17. Name the printer or leave the default name and click Next. 18. Click Install. You have now completed the Ethernet installation of your Legacy Driver. Unable to send a job to the machine? - Verify the IP address of the laser matches what was entered during driver install. - Make sure the USB is NOT connected. - Test your Ethernet cable. Further support is available at https://www. epiloglaser.com/tech-support/technicalsupport/ 5