Company Imprint & Legal Information | Hytronik
iot.koolmesh.com
Installation Guide for HYTRONIK models including: HBHC25 PIR Standalone Motion Sensor, HBHC25, PIR Standalone Motion Sensor, Standalone Motion Sensor, Motion Sensor
File Info : application/pdf, 9 Pages, 1.21MB
DocumentDocumentPIR Standalone Motion Sensor with 5.0 SIG Mesh HBHC25 HBHC25/R HBHC25/W Low-bay Reinforced Low-bay Wide range Low-bay RED HBHC25/H HBHC25/RH High-bay Reinforced High-bay Product Description HBHC25 is a Bluetooth PIR standalone motion sensor with 80mA DALI power supply built in, splitting into 2 DALI channels: 50mA for Channel 1 (up to 25 LED drivers) and 30mA (up to 15 LED drivers) for Channel 2. It is ideal for typical indoor applications such as office, classroom, healthcare and other commercial areas. With Bluetooth wireless mesh networking, it makes communication between luminaires much easier without time-consuming hardwiring, which eventually saves costs for projects (especially for retrofit upgrade projects!). Meanwhile, simple device setup and commissioning can be done via app. App Features HBHC25 HBHC25/R HBHC/W HBHC25/H HBHC25/RH (3-pyro) Quick setup mode & advanced setup mode Tri-level control Daylight harvest Circadian rhythm (Human centric lighting) Floorplan feature to simplify project planning Web app/platform for dedicated project management Koolmesh Pro iPad version for on-site configuration Grouping luminaires via mesh network Scenes Detailed motion sensor settings Interoperability with Hytronik Bluetooth product portfolio Compatible with EnOcean BLE switches Continuous development in progress... Hardware Features 80mA DALI broadcast output in 2 channels: - 50mA (Channel 1) - 30mA (Channel 2) Support to control DT8 LED drivers 3 Push inputs for flexible manual control Dusk/Dawn photocell (Twilight function) Push switch configuration Schedule to run scenes based on time and date Astro timer (sunrise and sunset) Staircase function (primary & secondary) Internet-of-Things (IoT) featured Device firmware update over-the-air (OTA) Keep real time for up to 2 weeks against power failure IP20/IP54 Ceiling/Surface mount box available as accessory Two types of blind inserts / blanking plates User-friendly design for installation High bay version available (up to 15m in height) 5-year warranty Device social relations check Bulk commissioning (copy and paste settings) Dynamic daylight harvest auto-adaptation Power-on status (memory against power loss) Offline commissioning Different permission levels via authority management Network sharing via QR code or keycode Remote control via gateway support HBGW01 Subject to change without notice. Edition: 17 Jun. 2021 Ver. A2 Page 1/9 5.0 SIG mesh iOS Android for iOS for Android Smartphone app for both iOS & Android platform Fully support EnOcean self-powered switch module PTM215B (HBES01/W & HBES01/B) Technical Specifications Bluetooth Transceiver Operation frequency Transmission power Range (Typical indoor) Protocol 2.4 GHz - 2.483 GHz 4 dBm 10~30m 5.0 SIG Mesh Sensor Data Sensor Model HBHC25 PIR max* detection range Installation Height : 6m Detection Range(Ø) :9m HBHC25/R Installation Height : 6m Detection Range(Ø) :10m HBHC25/W HBHC25/H HBHC25/RH Installation Height : 6m Detection Range(Ø) :18m Installation height15m (forklift) 12m (person) Detection range (Ø)24m Installation height20m (forklift) 12m (person) Detection range (Ø)40m Detection angle 360O * For more details of detection range, please refer to "detection pattern" section. Placement Guide and Typical Range for iPad Koolmesh Pro app for iPad Web for Web Web app/platform: www.iot.koolmesh.com Input & Output Characteristics Operating voltage 220~240VAC 50/60Hz Stand-by power <1W DALI Channel 1 DALI Channel 2 *Suitable for DALI DT8 LED drivers 50mA, Max. 25 devices 30mA, Max. 15 devices Safety & EMC EMC standard (EMC) Safety standard (LVD) RED Certification EN55015, EN61000, EN61547 EN60669-1/-2-1 AS/NZS60669-1/-2-1 EN300328, EN301489-1/-17 CB, CE , EMC, RED, RCM Environment Operation temperature IP rating Ta: -20OC ~ +50OC IP20 Smart Phone to Device Range 6-10m 10m Wire Preparation The smart device with the App installed will have a typical range of 10m, but varies from device to device. During commissioning, the installer will need to be in range of the devices when searching for devices to add to the network. Once the devices have been added to the network via the App, the devices will start communicating within the wireless mesh. This means that once the network is complete, all devices are accessible from the smart device when in a 20m range of a single point. 0.75 - 2.5mm 7-8mm Pluggable screw terminal. It is recommended to make connections to the terminal before fitting to the sensor. 1. 200 metres (total) max. for 1mm² CSA (Ta = 50) 2. 300 metres (total) max. for 1.5mm² CSA (Ta = 50) Subject to change without notice. Edition: 17 Jun. 2021 Ver. A2 Page 2/9 Mechanical Structure & Dimensions Ø66~68mm 1 2 3 62 4 70.5 75.2 5 A B * Install blind as required 1 2 3 4 5 * Install lens as required 6 7 1 62.2 62.2 2 62.2 Ø78 1. Ceiling (drill hole Ø 66~68mm) 2. Carefully prise off the cable clamps. 3. Make connections to the pluggable terminal blocks. 4. Insert plug connectors and secure using the provided cable clamps, then clip terminal covers to the base. 5. Fit detection blind (if required) and desired lens. 6. Clip fascia to body. 7. Bend back springs and insert into ceiling. 62.2 62.2 HBHC25 HBHC25/R HBHC25/W HBHC25/H HBHC25/RH 70.5 75.2 70.5 77.6 70.5 81 70.5 80.5 70.5 82.9 Subject to change without notice. Edition: 17 Jun. 2021 Ver. A2 Page 3/9 Detection Pattern & Optional Accessories 1. HBHC25 (Low-bay) HBHC25: Low-bay flat lens detection pattern for single person @ Ta = 20OC (Recommended ceiling mount installation height 2.5m-6m) A: Tangential movement B: Radial movement Mount height h = max.6m h = max.6m " Tangential: max. 9m # Radial: max. 4m insensitive sensitive insensitive sensitive Optional Accessory --- Ceiling/Surface Mount Box: HA03 2.5m 3m 4m 5m 6m Tangential (A) max 50m2 (Ø = 8m) max 64m2 (Ø = 9m) max 38m2 (Ø = 7m) max 38m2 (Ø = 7m) max 38m2 (Ø = 7m) Radial (B) max 13m2 (Ø = 4m) max 13m2 (Ø = 4m) max 13m2 (Ø = 4m) max 13m2 (Ø = 4m) max 13m2 (Ø = 4m) Ø 94 75 Optional Accessory --- Blind Insert for Blocking Certain Detection Angles Valid Range Valid Range Blind Option 1 --- Aisle Detection Blind Option 2 --- 180O Detection Subject to change without notice. Edition: 17 Jun. 2021 Ver. A2 Page 4/9 2. HBHC25/R (Reinforced Low-bay) HBHC25/R: Low-bay convex lens detection pattern for single person @ Ta = 20OC (Recommended ceiling mount installation height 2.5m-6m) A: Tangential movement B: Radial movement Mount height 2.5m h = max.6m h = max.6m 3m " Tangential: max. 10m # Radial: max. 5m 4m 5m insensitive sensitive insensitive sensitive 6m Optional Accessory --- Ceiling/Surface Mount Box: HA03 Tangential (A) max 79m2 (Ø = 10m) max 79m2 (Ø = 10m) max 64m2 (Ø = 9m) max 50m2 (Ø = 8m) max 50m2 (Ø = 8m) Radial (B) max 20m2 (Ø = 5m) max 20m2 (Ø = 5m) max 20m2 (Ø = 5m) max 20m2 (Ø = 5m) max 20m2 (Ø = 5m) Ø 94 75 Optional Accessory --- Blind Insert for Blocking Certain Detection Angles Valid Range Valid Range Blind Option 1 --- Aisle Detection Blind Option 2 --- 180O Detection 3. HBHC25/W (Wide range Low-bay) HBHC25/W: Low-bay convex lens detection pattern for single person @ Ta = 20OC (Recommended ceiling mount installation height 2.5m-6m) A: Tangential movement B: Radial movement Mount height 2.5m h = max.6m h = max.6m 3m " Tangential: max. 18m # Radial: max. 6m 4m 5m insensitive sensitive insensitive sensitive 6m Optional Accessory --- Ceiling/Surface Mount Box: HA03 Tangential (A) max 254m2 (Ø = 18m) max 254m2 (Ø = 18m) max 154m2 (Ø = 14m) max 113m2 (Ø = 12m) max 79m2 (Ø = 10m) Radial (B) max 28m2 (Ø = 6m) max 28m2 (Ø = 6m) max 28m2 (Ø = 6m) max 28m2 (Ø = 6m) max 13m2 (Ø = 4m) Ø 94 75 Subject to change without notice. Edition: 17 Jun. 2021 Ver. A2 Page 5/9 4. HBHC25/H (High-bay) HBHC25/H: High-bay lens detection pattern for forklift @ Ta = 20OC (Recommended ceiling mount installation height 10m-15m) A: Tangential movement B: Radial movement h = max.15m " Tangential: max. 24m h = max.15m # Radial: max. 16m insensitive sensitive insensitive sensitive Mount height 10m 11m 12m 13m 14m 15m Tangential (A) max 380m2 (Ø = 22m) max 452m2 (Ø = 24m) max 452m2 (Ø = 24m) max 452m2 (Ø = 24m) max 452m2 (Ø = 24m) max 452m2 (Ø = 24m) Radial (B) max 201m2 (Ø = 16m) max 201m2 (Ø = 16m) max 201m2 (Ø = 16m) max 177m2 (Ø = 15m) max 133m2 (Ø = 13m) max 113m2 (Ø = 12m) HBHC25/H: High-bay lens detection pattern for single person @ Ta = 20OC (Recommended ceiling mount installation height 2.5m-12m) A: Tangential movement B: Radial movement Mount height 2.5m h = max.12m h = max.12m 6m " Tangential: max. 20m # Radial: max. 3m 8m 10m 11m insensitive sensitive insensitive sensitive 12m Optional Accessory --- Ceiling/Surface Mount Box: HA03 Tangential (A) max 50m2 (Ø = 8m) max 104m2 (Ø = 11.5m) max 154m2 (Ø = 14m) max 227m2 (Ø = 17m) max 269m2 (Ø = 18.5m) max 314m2 (Ø = 20m) Radial (B) max 7m2 (Ø = 3m) max 7m2 (Ø = 3m) max 7m2 (Ø = 3m) max 7m2 (Ø = 3m) max 7m2 (Ø = 3m) max 7m2 (Ø = 3m) Ø 94 75 Optional Accessory --- Blind Insert for Blocking Certain Detection Angles Valid Range Valid Range Blind Option 1 --- Aisle Detection Subject to change without notice. Blind Option 2 --- 180O Detection Edition: 17 Jun. 2021 Ver. A2 Page 6/9 5. HBHC25/RH (Reinforced High-bay with 3-Pyro) HBHC25/RH: Reinforced high-bay lens detection pattern for forklift @ Ta = 20OC (Recommended ceiling mount installation height 10m-20m) A: Tangential movement B: Radial movement h = max.20m " Tangential: max. 40m h = max.20m # Radial: max. 15m insensitive sensitive insensitive sensitive Mount height 10m 11m 12m 13m 14m 15m 20m Tangential (A) max 346m2 (Ø = 21m) max 660m2 (Ø = 29m) max 907m2 (Ø = 34m) max 962m2 (Ø = 35m) max 1075m2 (Ø = 37m) max 1256m2 (Ø = 40m) max 707m2 (Ø = 30m) Radial (B) max 177m2 (Ø = 15m) max 177m2 (Ø = 15m) max 154m2 (Ø = 14m) max 154m2 (Ø = 14m) max 113m2 (Ø = 12m) max 113m2 (Ø = 12m) max 113m2 (Ø = 12m) HBHC25/RH: Reinforced high-bay lens detection pattern for single person @ Ta = 20OC (Recommended ceiling mount installation height 2.5m-12m) A: Tangential movement B: Radial movement h = max.12m " Tangential: max. 30m h = max.12m # Radial: max. 4m insensitive sensitive insensitive sensitive Mount height 2.5m 6m 8m 10m 11m 12m Optional Accessory --- Ceiling/Surface Mount Box: HA03 Tangential (A) max 38m2 (Ø = 7m) max 154m2 (Ø = 14m) max 314m2 (Ø = 20m) max 531m2 (Ø = 26m) max 615m2 (Ø = 28m) max 707m2 (Ø = 30m) Radial (B) max 7m2 (Ø = 3m) max 7m2 (Ø = 3m) max 7m2 (Ø = 3m) max 13m2 (Ø = 4m) max 13m2 (Ø = 4m) max 13m2 (Ø = 4m) Ø 94 1.5 4 75 15.2 Big and small silicon gasket used to make IP54 degree protection when HBHC25 series device mounted into HA03 housing for ceiling mount Small silicon water-proof gasket dimension(size:mm) Big silicon water-proof gasket dimension(size:mm) Ø 62 Ø 76.5 4.2 48.2 61.8 Subject to change without notice. Edition: 17 Jun. 2021 Ver. A2 Page 7/9 Typical Application for Classroom (Human Centric Lighting) Different from other complex system, Hytronik offer a simple yet decentralized one-stop solution to achieve Human Centric lighting. It cuts at least 50% to 60% in costs as compared to traditional complex wiring system. This solution is based on Bluetooth together with an intuitive and portable app; it does not require complicated PC tools to set up and configure. What's more, our Bluetooth solution is futureproof with OTA upgrade capability. With services of tailor making Bluetooth solution including app, products, server and cloud, this solution brings flexibility and versatility to adapt to each customer's requirements at affordable prices. What you need HBHC25 x 1 Push switches x 3 HHC2045 x 8 for LED panels HHC2050L x 4 for linear LED lights HBP02 x 1 (Optional) QCB01 x 2 with cables and plugs (Optional) HBGW01 gateway x 1 (Optional) Free app Cloud & server What you get · Bluetooth enabled and controllable via app · 2 DALI channels for whiteboard/electronic display area and student area independently · Human Centric Function · PIR motion sensing · Daylight Harvest · Manual control: brightness adjustment, colour tuning, recall scenes etc. · Tunable white LED driver (Can also be any other DALI DT8 drivers) · Bluetooth touch panel · Can recall up to 6 scenes · Switchable between each scene · Brightness adjustment,colour tuning · Labour cost saved significantly · Simplify wiring on site via plug `n' play · Hassle-free maintenance after installation · Remote control access · Data collection and analysis · Futureproof via OTA · Off-line commissioning · Settings data backup · Accounts security UP UP DOWN WARM UP UP DOWN WARM UP UP DOWN WARM HBP01 P3 P2 P1 N L HBHC25 DA1 DA2 HBHC25 x 1 Subject to change without notice. Top-view Edition: 17 Jun. 2021 Ver. A2 Page 8/9 Wiring Diagram -+ LN LED LED Driver DA DA L 220~240VAC N P3 P2 P1 N L HBHC25 DA1 DA2 Max.15pcs -+ LN LED LED Driver DA DA -+ LN LED LED Driver DA DA Max.25pcs -+ LN LED LED Driver DA DA Dimming Interface Operation Notes Switch-Dim The provided Switch-Dim interface allows for a simple dimming method using commercially available non-latching (momentary) wall switches. Detailed Push switch configurations can be set on Koolmesh app. Switch Function Push switch Sensor-link Emergency Self-Test Function Fire Alarm (VFC signal only) Action Descriptions Short press (<1 second) * Short press has to be longer than 0.1s, or it will be invalid. Double push Long press (1 second) / Short press (<1 second) * Short press has to be longer than 0.1s, or it will be invalid. - Turn on/off - Turn on only - Turn off only - Recall a scene - Quit manual mode - Do nothing - Turn on only - Turn off only - Recall a scene - Quit manual mode - Do nothing - Dimming - Colour tuning - Do nothing - Upgrade a normal on/off motion sensor to a Bluetooth controlled motion sensor - Start Self test (Monthly) - Start Self test (Annually) - Stop Self test - Invalid Long press (1 second) - Start Self test (Monthly) - Start Self test (Annually) - Stop Self test - Invalid Refer to App User Manual V2.1 - Able to connect the Fire Alarm system - Once the fire alarm system is triggered, all the luminaries controlled by the Push Switch will enter the preset scene (normally it's full on), after the fire alarm system gives the ending signal, all the luminaries controlled by this Push Switch will revert back to normal status. Additional Information / Documents 1. To learn more about detailed product features/functions, please refer to www.hytronik.com/download ->knowledge ->Introduction of App Scenes and Product Functions 2. Regarding precautions for Bluetooth product installation and operation, please kindly refer to www.hytronik.com/download ->knowledge ->Bluetooth Products - Precautions for Product Installation and Operation 3. Regarding precautions for PIR Sensors installation and operation, please kindly refer to www.hytronik.com/download ->knowledge ->PIR Sensors - Precautions for Product Installation and Operation 4. Data sheet is subject to change without notice. Please always refer to the most recent release on www.hytronik.com/products/bluetooth technology ->Bluetooth Sensors 5. Regarding Hytronik standard guarantee policy, please refer to www.hytronik.com/download ->knowledge ->Hytronik Standard Guarantee Policy Subject to change without notice. Edition: 17 Jun. 2021 Ver. A2 Page 9/9