D1 - 3 Channel 4K Dash Camera

Notice

Thanks for ordering the D1 3 Channel 4K Dash Camera. Please read this manual before using the camera. If the damage is caused by failure to follow the instructions, the warranty will be voided.

• Please use the original power cable coming with the package. Do not connect this dash cam with a non-original charger; an unmatched charger or voltage converter may damage the dash cam's battery, even causing danger.
• Do not try to open the cover or disassemble the internal battery by yourself without professional instruction.
• Do not put the product into fire.
• Do not use the product if it has become wet, or do not touch the charger with wet hands.
• Please insert a micro SD card over class 10 that is compatible with the SDXC standard. The storage is minimum support 512MB, max to 256GB.
• For the first time use, please insert the SD card before powering the dash cam, and format the SD card on the camera or PC.

Content

1. Package Lists
2. Product Diagram
3. Installation
4. Product Specification
1. Power On/Off
2. Video Recording Mode
3. Photo Mode
4. Video Playback Mode
5. Menu Setting
5. Parking Mode Instruction
6. WiFi and App Instruction
7. GPS Instruction
8. Transport files to PC
9. Tech Specs
10. Warranty

01 Package Lists

D1 Front Camera

Standard Accessories

• Suction cup*1
• Cigarette lighter*1
• User manual*1

With Rear Camera

• Rear Camera*1
• Rear camera cable*1
• 3M sticker*1

D1 Front Camera + Inside Camera

Standard Accessories

• Suction cup*1
• Cigarette lighter*1
• User manual*1

With Rear Camera

• Rear Camera*1
• Rear camera cable*1
• 3M sticker*1

D1 Dash Camera Step-down line for Parking Mode (Output current: 3A)

02 Product Diagram

Key:

1. LED indicator
2. Display
3. Magnetic suction cup
4. Inside camera
5. IR light
6. Type-C port
7. TF card slot
8. Rear camera/Earphone port
9. Reset Button
10. Power Button
11. Up Button [Up/Lock/Switch/WiFi]
12. OK Button [Confirm/Video]
13. Down Button [Scroll down/Switch Cameras/Audio]
14. M Button [Menu/Mode Switch/Picture]
15. Front Camera
16. Mic

03 Installation

Install Front Camera

1. Connect the device with the suction cup, then install it on the windshield, ensuring the dash cam does not obstruct the driver's view.
2. Connect the device with the cigarette lighter for power supply, and hide the rest of the cable into the car's edge.
3. Start the car engine; the device will power on automatically.

Install Rear Camera

1. Connect the device and the rear camera with the cable.
2. Stick the rear view camera to the rear window using the 3M glue, and hide the rest of the cable into the car's edge.

Note:

• The rear view camera is not waterproof; please do not install it outside the car.
• The length of the rear camera cable is approximately 6 meters. Connecting the red wire on the extended cable to the reversing lamp positive will switch the dash cam to the rear camera when the car is reversing.

04 Product Specification

1. Power On/Off

• Power on: The device will automatically enter video recording mode when the Power Button is pressed or the device is connected to the car charger.
• Power off: Long press and hold the power button until the screen turns off.

2. Video Recording Mode

• Insert the micro SD card into the card slot and power on the device. The dash cam will be in recording mode, and the icon will turn.
• Press the OK button to stop recording; the icon on the display will stop blinking and disappear.
• Press the OK button again to restart the recording mode.

3. Photo Mode

• In recording mode, press the M button to take photos.

4. Video Playback Mode

• Press OK to stop recording, then long press the M button to enter the video playback page. The list on the left shows videos and pictures chronologically. The icon on the upper left represents a video file, and the icon represents a picture file. The letter at the end of the file name represents the camera: A for front camera recordings, B for inside camera recordings, and C for rear camera files.
• Press the Up/Down buttons to select a file, and press OK to play the video or picture.
• Short press the M button to set the videos. Click to delete the current or all videos, click to lock or unlock the current or all videos. Locked videos will not be overwritten unless unlocked.

5. Menu Setting

The menu allows adjustment of various settings:

• Resolution: Select video resolution. Note that only the selected camera will record videos; unselected cameras will not record.
• Loop Recording: Set the recording duration for each video. When the memory card is full, the new video will automatically overwrite the earliest videos. Options: Off/1min/3mins/5mins/10mins. System Default: 3 min.
• Exposure: Adjust the exposure level to make the video darker or brighter. Options: -2.0, -5/3, -4/3, -1, -2/3, -1/3, +0.0, +1/3, +2/3, +1, +4/3, +5/3, +2.0. System Default: +0.0.
• WDR: WDR enhances dash cam clarity in dark or bright conditions and expands the shooting range. Options: On/Off. System Default: On.
• Screen Saver: Enables the screen to auto-off while the dash cam continues recording. Options: Off/1min/2mins/5mins/10mins. System Default: Off.
• Parking Guard: Requires the step-down line to be connected. In parking mode, the dash cam continuously buffers video and saves a parking recording when motion is detected within its field of view. Options: Off/Time lapse video/Parking Guard. System Default: Off.
• G Sensor: Detects significant or sudden movement (impact or collision) to trigger event recording. Sensitivity can be adjusted to prevent minor incidents from triggering recordings. Options: Low/Medium/High. System Default: Low.
• Audio Recording: Options: On/Off. System Default: On.
• Keypad Sound: Options: On/Off. System Default: On.
• Language: Options: English/Japanese/Russian/Simplified Chinese/Traditional Chinese/Italian/German/Portuguese/Spanish/French. System Default: English.
• Time: Set the Date/Month/Year and select 12-hour or 24-hour clock.
• WiFi: Connects the dash cam wirelessly to a smartphone for accessing recordings and settings. Options: On/Off. System Default: Off.
• Frequency: Set the AC power frequency to reduce interference from fluorescent lights. In the USA and Canada, set to 60Hz. Options: 50Hz/60Hz. System Default: 60Hz.
• Rear Image Rotation: Mirror flip the image from the rear view camera. Options: On/Off. System Default: On.
• Inside Image Rotation: Mirror flip the image from the inside camera. Options: On/Off. System Default: On.
• 2.4G/5G: Switch WiFi transmission speed between 2.4G and 5G. Options: 2.4G/5G. System Default: 5G.
• Night Scene: Controls infrared LED lights of the inside camera. Options: Auto/On/Off. System Default: Auto.
• Speed Unit: Options: KM/H, MP/H. System Default: KM/H.
• Daylight Saving: Options: On/Off. System Default: Off.
• GPS: Records driving trace, speed, time, and mileage. Outputs information via the interface. Options: On/Off. System Default: On.
• Time Zone: Select time zones according to your location. System Default: GMT+08:00.
• Format: Erases all files on the card. Upload desired files to PC before formatting. Options: Yes/No.
• Default Setting: Resets all settings to factory preset. Original personalized settings will be lost. Options: Yes/No.
• Version: Check the device version.

6. Parking Mode Instruction

• The parking mode function requires the step-down line, which is not included and must be purchased separately.
• Parking mode defaults to OFF.
• Parking mode ON:
  1. If 'Parking Guard' is selected, the status bar icon will show 'P'. Disconnect the ACC to power off the dash cam. Upon detecting motion or collision, the device will turn on to record videos and then turn off automatically after the motion or collision ends.
  2. If 'Time-lapse' is selected, the video recording status bar icon will show . After disconnecting ACC, the device continues recording. Video resolution automatically switches to 1080P, recording at 2FPS per second.

7. WiFi and App Instruction

Download App and connect WiFi

1. Download the 'Witcam Pro' app from the App Store or Google Play.
2. Scan the QR code or visit the provided URL to download the WITCAM PRO APP: https://play.google.com/store/apps/details?id=com.zj.witcampro
3. Long press or short press the button to enter the system and open WiFi. The SSID name and password will be displayed. SSID name: ZD81_CARDV684e05ca6d3c.
4. On your mobile phone, open WiFi and find the SSID name. The default password is 12345678. Input the password to connect to the dash cam's WiFi.
5. Open 'Witcam Pro' on your mobile phone, click to add the device, and it will connect to the dash camera. The device can be set via the app, allowing you to take photos, record, or share videos.

App Instruction

1. Click the button to start/stop recording. When recording stops, click the button to access the dash cam's memory card for checking or downloading videos, photos, or emergency recordings. Click the button to set up dash cam functions.
2. After disconnecting the dash cam's WiFi, enter the 'Witcam Pro' album to playback, share, or edit downloaded videos.

Note:

• When connected to 'Witcam Pro' WiFi, your phone's internet access will be cut off. Disconnect 'Witcam Pro' WiFi if you need to use your phone's internet function.
• The WiFi signal range is approximately 10 meters. Connection will drop if your smartphone is out of range.

8. GPS Instruction

The built-in GPS records the driving trace and shows the tracking on your mobile phone or PC.

• On mobile phone: Download recording videos from 'Witcam Pro'. Disconnect the App WiFi, then connect to the internet. Enter 'Witcam Pro' to play the video; the GPS trace will be displayed.
• On PC: Transfer videos to your PC and play them using the GPS player. Download 'Witcam Pro PC': http://www.ligoor.com/app/witcam/witcampc.html

9. Transport files to PC

• Connect the dash cam and PC via USB.
• The dash cam will turn on automatically, displaying 'Mass Storage' and 'PC Camera'.
• Select the 'Mass Storage' option; the dash cam can be read as a storage disk on the computer.
• Follow the on-screen instructions on the computer to watch or save the needed videos/photos.

05 Tech Specs

06 FCC STATEMENT:

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may cause undesired operation.

Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

FCC Radiation Exposure Statement: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator and your body.