Lindab Building Product Declaration
Product: Pascal 4 - LCFV
According to BPD associations' standardised format eBVD
1. COMPANY INFORMATION
Company name: Lindab Sverige AB Filial
Address: Dolkvägen 16, Kungsäter
E-mail: kundtjanst.ventilation@lindab.com
Telephone: +46 10 14 64 100
Website: www.lindab.com
VAT number: [Not specified]
Organisation number: 556247-2273
GLN: 7300009-00795-0
DUNS: [Not specified]
Company was last saved: 2025-02-10 10:43:06
Company's certification
Certifications: ISO 9001 ✔️, ISO 14001 ✔️
Other: [Not specified]
Policies and guidelines
The company has a code of conduct/policy/guidelines for dealing with social responsibility in the supplier chain, including procedures for ensuring the requirements.
This is third-party audited: [Not specified]
Affiliated guidelines/management systems:
- UN guiding principles for companies and human rights ✔️
- ILO's eight core conventions ✔️
- OECD Guidelines for Multinational Enterprises ✔️
- UN Global Compact ✔️
- ISO 26000 ✔️
- Other policy guidelines: [Not specified]
Management system
If you have a management system for corporate social responsibility, what out of the following is included in the work?
- Mapping ✔️
- Risk analysis ✔️
- Action plan ✔️
- Monitoring ✔️
Sustainability reporting guidelines: GRI (Global Reporting Initiative), GHG (Green House Gas Protocol)
2. ARTICLE INFORMATION
Document data
Id: A-7300009-00795-0-154
Created: 2025-07-14 07:41:45
Version: 5
Last saved: 2025-07-14 09:02:23
Changes relates to: Update of section 2-10
Article details
Article name: Pascal 4 - LCFV
Article No/ID concept: [Not specified]
Article identity: GTIN: 7319660392770, 7319660392787, 7319660392855, 7319660392862, 7319660966018, 7319660989468, 7319661722897, 7319661722958, 7319661723016, 7319661750272, 7319662421997
Product group/Product group classification
| Product group system | Product group id |
|---|---|
| BK04 | 21004 |
| BSAB96 | QM |
Article description
LCFV is a VAV diffuser unit for supply air with a circular unperforated face plate for free hanging installations. LCFV includes a unique linear cone damper with an integrated volume flow regulator used for VAV regulation directly in the unit. The built-in VAV actuator is delivered pre-programmed with damper characteristic and, in combination with stable flow measurement over the damper, it ensures very accurate and reliable VAV regulation. In the Pascal system, LCFV is controlled by a Regula Combi room controller, allowing all room settings to be done after installation. This means no factory settings or specific room labeling are needed for LCFV.
The assessment at Byggvarubedömningen is registered under the name "Pascal 4". It is also possible to use the article name (LCFV) or BVB ID 82973 as search criteria.
Declarations of performance
Declarations of performance: Not applicable
Declaration of performance number: [Not specified]
Annexes
3. CHEMICAL CONTENT
Chemical content
Declaration applies to: Product
Chemical content for the whole article: The concentration is calculated at component level according to the principle of "once an article always an article".
Safety data sheet for the article: Not applicable
Classification of the article: Not applicable
Classification under Regulation (EC) No 1272/2008: [Not specified]
Version of candidate list used: 2025-07-13
RoHS Directive compliance: Yes
Proportion of material content declared: 100%
Reason for not declaring 100% material content: [Not applicable]
Weight of the article: [Not specified]
Nanomaterials: The product does not contain deliberately added nanomaterial.
Nanomaterials reported to Product Register: No
Proportion of volatile organic substances [g/litre]: [Not specified]
Article and/or sub-components
| Phase | Component | Comment | Material | Substance | Concentration interval (%) | EG/CAS/Alternative designation | Other substance properties | Weight% of product |
|---|---|---|---|---|---|---|---|---|
| Delivery | Body, top plate, damper parts etc. | Galvanized steel | =100 | EN 10346:2015 | Comment: Alloy DX51+Z275 | =79.817 | ||
| Color | Standard powder coating | JOTUN GUARD STYLE D (C102) | =3.592 | |||||
| Barium Sulphate | =20.17 | 007727-43-7 | ||||||
| Epoxy resin | =38.64 | 025036-25-3 | ||||||
| Iron oxide | =2.56 | 001309-37-1 | ||||||
| Titanium dioxide | =38.64 | 013463-67-7 | ||||||
| Hose | POM | =2.17 | 9002-81-7 | =0.469 | ||||
| Silicone | =97.83 | 63394-02-5 | ||||||
| Insulation | Cellofoam | PET | =100 | 25038-59-9 | =4.969 | |||
| Motor | Motor LHV-D3-MP from Belimo | Electronics | =13.04 | =7.398 | ||||
| Plastic part of casing | =50.69 | |||||||
| Steel parts of casing | =36.27 | |||||||
| Plastic parts 1 | DOTP | =25 | 6422-86-2 | Comment: Plasticizer | =0.796 | |||
| PVC | =75 | 9002-86-2 | ||||||
| Plastic parts 2 | PA66 | =100 | 32131-17-2 | =0.929 | ||||
| Rail, distance, rivets | Aluminium | =100 | Alu 6061 | =0.265 | ||||
| Safe sealing strip | Rubber | EPDM | =100 | Proprietary | Comment: The content of the rubber gasket is confidential information. No classified or hazardous substances have been added. Fulfills all of BASTA's criteria as of July 2025. | =0.184 | ||
| Rubber | Parafin oil | =20 | 8012-95-1 | Comment: A health test has been performed, and no remarks were noted. | ||||
| Screws, nuts etc. | Steel | =100 | CK15 / 1.1141 | =0.949 | ||||
| Sealant | Sikacryl® Vent 188 N | =100 | Registered in BASTA | Comment: Registered in BASTA by supplier. | =0.306 | |||
| Spring | Stainless steel | =100 | AISI 316L / 1.4404 | =0.061 | ||||
| Steel band | Steel | =100 | AZ SS-EN 10215 | =0.265 |
4. RAW MATERIALS
Supporting documentation for raw materials
Third-party certified system for control of origin, raw material extraction, manufacturing or recycling processes: No
Raw materials
Total recycled material in the article
Is recycled material included in the article? [Not specified]
| Material | Share of waste (from own production) | Share of waste (from other people's production) | Recycled material (treated) | Recycled material | Weight/percent by weight | Comment |
|---|---|---|---|---|---|---|
| Stainless steel | 0 | 0 | 100 | 0 | >75 % | About 75% recycled material are being used in the production of stainless steel. |
| Steel | 0 | 0 | 100 | 0 | >20 % | About 20% recycled material are being used in the production of steel. |
Renewable material
Proportion of renewable material in the article: 0
Included biobased raw material tested according to ASTM test method D6866: [Not specified]
Origin of raw material
Withdrawal of virgin fossil material: No
Maximum percentage of virgin fossil material: [Not applicable]
Wood raw materials
Wood raw materials are included: [Not specified]
Proportion certified [%]: [Not specified]
Included wood raw material is certified: [Not specified]
Certification system used: [Not specified]
Reference number: [Not specified]
Country of logging: [Not specified]
Criteria met:
- Does not contain type of wood or origin in CITES appendix of endangered species: [Not specified]
- Which version of CITES has been used for the check?: [Not specified]
- The timber has been logged legally and there is certification for this: [Not specified]
5. ENVIRONMENTAL IMPACT
Environmental impact during life cycle of the article, production phase module A1-A3 under EN 15804
Environmental product declaration according to EN 15804 or ISO 14025: [Not specified]
Product-specific rules (PCR) applied: [Not specified]
Registration number / ID number for EPD: [Not specified]
Life cycle assessment description: The information refers to "gate to gate", including inflows (raw materials, inputs, energy, etc.) for the registered product into the manufacturing unit, and outflows (emissions and waste) from it, related to a unit of product of 1 kg.
Country of final manufacture: Czech Republic
Energy used in manufacturing: Electricity from renewable sources.
Transport: <99% truck, deliveries to the customer/branch; <1% electric forklift.
Climate impact from internal transports: CO2 0.0025 kg, CH4 <0.0001 kg and N20 <0.0001 kg.
Emissions to air, water or soil from manufacture (climate impact from operations): Carbon dioxide equivalents (CO2-e) ≈ 1.5 kg per kilo product (Not included in Lindab carbon footprint study).
Production emissions: The production itself causes no emissions to air, water or land.
Residual products from manufacture:
- <30% steel scrap, 100% is recycled, waste code 17 04 05.
- <18% aluminium scrap, 100% is recycled, waste code 17 04 02.
- All waste is handled by a carrier with necessary permits. No waste is exported.
For information about raw materials, distribution, waste etc., see other sections.
6. DISTRIBUTION
Distribution of finished article
Supplier applies system with multiple-use packaging: No
Supplier takes back packaging: No
Supplier affiliated to a system for product responsibility for packaging: Yes
Packaging system: Näringslivets producentansvar
Packaging can be reused: Yes
Packaging can be recycled: Yes
Packaging can be energy recycled: Yes
Supplier uses Retursystem Byggpall: No
Other information: Possible products are packed together. Packaging materials include wood, cardboard, and plastic wrap. All packaging consists of recyclable material. Shipments of manufactured goods are mainly transported by truck to the customer/branch.
7. CONSTRUCTION PHASE
Construction phase
Special requirements in storage: Yes
Specification for storage: To prevent soiling and oxidation, the product should be stored protected from the weather. See Lindab's product catalogue for more information.
Special requirements for surrounding building products: No
Specification for surrounding building products: [Not specified]
Other information: [Not specified]
8. USE PHASE
Use phase
Requirements for input materials for operation and maintenance: No
Specification for input materials: [Not specified]
Requires supply of energy during operation: No
Specification for energy supply: [Not specified]
Estimated technical service life: >50 years
Comment on service life: Lifetime depends on the environment where the product is used. Corrosive environments can affect the product's life negatively. There is a special instruction for the care of this product; see Lindab's product catalogue for more information. The product can be adapted to work with new tech.
Energy labelling under Energy Labelling Directive (2010/30/EU): Not applicable
Energy labelling (G to A, A+, A++, A+++): [Not specified]
Energy marking (G to A): [Not specified]
Other information: [Not specified]
9. DEMOLITION
Demolition
Prepared for disassembly (dismantling): Yes
Separated into pure material types for recycling: Not applicable
Specification for material separation: The parts can easily be separated into insulation, plastic, steel, metals and electronics.
Special measures for protection of health and environment in demolition/disassembly: No
Specification for protection measures: Appropriate protective equipment should be used to minimize risk of injury and discomfort.
Other information: [Not specified]
10. WASTE MANAGEMENT
Delivered article
Covered by Ordinance (2014:1075) on producer responsibility for electrical and electronic products: No
Reuse possible for the whole or parts: Yes
Specification for reuse: The entire product can be reused.
Material recovery possible for the whole or parts: Yes
Specification for material recovery: ~90% of the material can be recycled.
Energy recovery possible for the whole or parts: Yes
Specification for energy recovery: Heat recovery occurs at smelter.
Supplier restrictions/recommendations for re-use, material or energy recovery or landfilling: Yes
Specification for restrictions/recommendations: All materials used in the product can be easily separated, allowing for proper recycling in accordance with applicable waste codes and regulations. Electronic components, such as the motor, should be taken to a local waste management facility. Any hazardous waste must be handled by an authorized contractor for safe disposal. Identified metal fractions should be directed to metal recycling, while combustible materials are to be sent to an approved incineration facility.
Waste code for the delivered article when it becomes waste: 170402-02 Aluminium, 170405-05 Iron and steel, 191204-04 Plastic and rubber, 200136-36 Other discarded electrical and electronic equipment.
Mounted article
Classified as hazardous waste (mounted article): No
Other information: [Not specified]
11. INDOOR ENVIRONMENT
Indoor environment
Article not intended for indoor use: [Not specified]
Article does not emit any substances: ✔️
Emissions from the article not measured: [Not specified]
Critical moisture state: No
Specification for critical moisture state: [Not specified]
Noise
Can the article give rise to own noise? No
Value: [Not specified]
Unit: [Not specified]
Measuring method: [Not specified]
Electrical field
Can the article give rise to electrical fields? No
Value: [Not specified]
Unit: [Not specified]
Measuring method: [Not specified]
Magnetic fields
Can the article give rise to magnetic fields? No
Value: [Not specified]
Unit: [Not specified]
Measuring method: [Not specified]
Paints and varnishes
Article is resistant to fungi and algae in use in wet areas: [Not specified]
Emissions
The article produces the following emissions in intended use: [Not specified]
