Instructions for MechaTronix models including: IceLED Ultra, Active Star LED Cooler, LED Cooler, Active Star Cooler, IceLED Ultra, Cooler
MechaTronix ICELED ULTRA
ICELED ULTRA Mechatronix Active Cooler - Cutter Electronics
File Info : application/pdf, 1 Pages, 562.34KB
DocumentDocumentø99 x H75 (mm) Rth 0.25 °C/W Power Pd 200 W IceLED Ultra | Luminus Modular Active Star LED Cooler ø99mm Mounting Instruction Patented, high performance Luminus LEDs are the brightest and most versatile solid state light sources available today, redefining the solid state lighting landscape by enabling the adoption of LED technology into emerging markets. Luminus technology is used in commercial and industrial lighting fixtures, theatrical lighting, projectors, signs, medical equipment, UV curing... just about anywhere a bright, efficient, reliable, long-life light source is needed. Mounting indicator marks overview MechaTronix recommends the use of a high thermal conductive interface between the LED module and the LED cooler. Either thermal grease, a thermal pad or a phase change thermal pad thickness 0.1-0.15mm is recommended. Thermal pads or phase change thermal pads can be preapplied from MechaTronix. Luminus Gen 4 COB Array Model names · CXM-32 Mounting · Direct mounting with 2 self tapping screws M3 x 6mm Red indicator marks Luminus Gen 3 COB Array Model names · CXM-32 (AC) Mounting · Direct mounting with 2 self tapping screws M3 x 6mm Red indicator marks Luminus Studio COB Gen 4 Model names · CVM-32 Mounting · Direct mounting with 2 self tapping screws M3 x 6mm Red indicator marks No.818, Dashun 2nd Rd., Sanmin Dist., Kaohsiung City 80787, Taiwan sales@mechatronix-asia.com www.led-heatsink.com www.mechatronix-asia.com Tel: +886-7-381-5892 Fax: +886-7-383-9293 VAT: 28600841