LG Electronics & Home Appliances | Shop Now | LG USA
Instruction Manual for LG models including: SL4, Wireless Sound Bar
Manual Subwoofer Connection If the subwoofer does not make sound, try to connect manually. a Press PAIRING on the rear of the wireless subwoofer. • The yellow - green LED on the front of the wireless subwoofer blinks quickly. (If the yellow - green LED does not blink, press and hold the PAIRING.) b Turn on the sound bar. • Pairing is ...
Bluetooth connection to only BT and LG TV. SOUND EFFECT: Selects a sound effect mode. - TV remote: Long press SOUND EFFECT and press it again to use TV remote control. FOLDER W/S: Searches a folder. J: Displays the information of a file, an input source or connected Bluetooth device name. - Auto Power ON/OFF: Long press J and press it again.
Please read this manual carefully before operating your set and retain it for future reference. To view the instructions of advanced ...
File Info : application/pdf, 6 Pages, 772.91KB
DocumentDocumentENGLISH SIMPLE MANUAL Wireless Sound Bar Please read this manual carefully before operating your set and retain it for future reference. To view the instructions of advanced features, visit http://www.lg.com and then download Owner's Manual. Some of the content in this manual may differ from your unit. MODEL SL4 MFL71380137 2105_Rev01 SL4.DCANLLM_SIM_ENG_MFL71380137.indd 1 www.lg.com Copyright © 2021 LG Electronics Inc. All Rights Reserved. 2021-06-21 8:41:47 Front Panel The buttons are located on the side. 1 (Standby) · · · · · · · · · ·Switches the unit ON or OFF. F (Function) · · · · · · · · · · · · · · · · · · · · · · · ·Selects function. p/o (Volume) · · · · · · · · · · · · · · · · · · · · Adjusts volume. Rear Panel DC IN · · · · · · · · · · · · · · · · · · · · · Connect to the AC adapter. OPTICAL IN · · · · · · · · · · · · Connect to an optical device. USB Port · · · · · · · · · · · · · · · · · · · ·Connect to a USB device. Subwoofer Connection Place the wireless subwoofer near the sound bar and follow steps below. a Connect the power cord of the sound bar and the wireless subwoofer to the outlet. b Turn on the sound bar. · The sound bar and wireless subwoofer will be automatically connected. The subwoofer's yellow - green LED turns on. Manual Subwoofer Connection If the subwoofer does not make sound, try to connect manually. a Press PAIRING on the rear of the wireless subwoofer. · The yellow - green LED on the front of the wireless subwoofer blinks quickly. (If the yellow - green LED does not blink, press and hold the PAIRING.) b Turn on the sound bar. · Pairing is completed. The yellow - green LED on the front of the wireless subwoofer turns on. Keep the sound bar and the subwoofer away from the device (ex. wireless router, microwave oven, etc.) over 1 m (3.3 ft) to prevent wireless interference. 1 m ! (3.3 ft) SL4.DCANLLM_SIM_ENG_MFL71380137.indd 2 2021-06-21 8:41:50 TV Connection a Connect the sound bar to the TV using Optical cable. b Set up [External Speaker (Optical)] on your TV setting menu. TV Remote control Replacement of Battery Additional Device Connection a Connect to the external device like as follow. (Set-top Box, Player etc.) TV b Set the input source by pressing F repeatedly. C/V: Skip/Search N: Play/Pause - Bluetooth connection lock (BT LOCK): Select the Bluetooth function by pressing F repeatedly. Long press N and press it again to limit Bluetooth connection to only BT and LG TV. SOUND EFFECT: Selects a sound effect mode. - TV remote: Long press SOUND EFFECT and press it again to use TV remote control. FOLDER W/S: Searches a folder. J: Displays the information of a file, an input source or connected Bluetooth device name. - Auto Power ON/OFF: Long press J and press it again. : Adjusts sound level of each speaker. REPEAT: Listens to your files repeatedly or randomly. SL4.DCANLLM_SIM_ENG_MFL71380137.indd 3 2021-06-21 8:41:51 Additional Information Specification Power consumption AC adapter Refer to the main label. · Model : DA-38A25 · Manufacturer : Asian Power Devices Inc. · Input : 100 - 240 V ~ 50 - 60 Hz · Output : 25 V 0 1.52 A · Model : MS-Z1520R250- 038A0-P · Manufacturer : MOSO POWER SUPPLY TECHNOLOGY CO., LTD. · Input : 100 - 240 V ~ 50/60 Hz · Output : 25 V 0 1.52 A Dimensions (W x H x D) Approx. 890.0 mm X 57.0 mm X 85.0 mm With foot (35 inch x 2.2 inch x 3.3 inch) Bus Power Supply (USB) Amplifier 5 V 0 500 mA (Total RMS Output power) 300 W RMS Design and specifications are subject to change without notice. SL4.DCANLLM_SIM_ENG_MFL71380137.indd 4 2021-06-21 8:41:51 Industry Canada Statement [For having wireless function (WLAN, Bluetooth,...)] This device contains licence-exempt transmitter(s)/ receiver(s) that comply with Innovation, Science and Economic Development Canada's licence-exempt RSS(s). Operation is subject to the following two conditions: (1) This device may not cause interference. (2) This device must accept any interference, including interference that may cause undesired operation of the device. CAN ICES-003(B) / NMB-003(B) IC Radiation Exposure Statement [For having wireless function (WLAN, Bluetooth,...)] This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20 cm (7.8 inches) between the antenna & your body. NOTE: THE MANUFACTURER IS NOT RESPONSIBLE FOR ANY RADIO OR TV INTERFERENCE CAUSED BY UNAUTHORIZED MODIFICATIONS TO THIS EQUIPMENT. SUCH MODIFICATIONS COULD VOID THE USER'S AUTHORITY TO OPERATE THE EQUIPMENT. WARNING [For product having the wireless function using 5 GHz frequency bands] i. the device for operation in the band 51505250 MHz is only for indoor use to reduce the potential for harmful interference to co-channel mobile satellite systems; ii. for devices with detachable antenna(s), the maximum antenna gain permitted for devices in the bands 52505350 MHz and 5470-5725 MHz shall be such that the equipment still complies with the e.i.r.p. limit; iii. for devices with detachable antenna(s), the maximum antenna gain permitted for devices in the band 57255850 MHz shall be such that the equipment still complies with the e.i.r.p. limits as appropriate; and iv. [for devices operating in the band 5250-5350 MHz having an e.i.r.p. greater than 200 mW] antenna type(s), antenna models(s), and worst-case tilt angle(s) necessary to remain compliant with the e.i.r.p. elevation mask requirement set forth in section 6.2.2.3 of RSS-247 shall be clearly indicated. Users should also be advised that high-power radars are allocated as primary users (i.e. priority users) of the bands 5250-5350 MHz and 5650-5850 MHz and that these radars could cause interference and/or damage to LE-LAN devices. SL4.DCANLLM_SIM_ENG_MFL71380137.indd 5 2021-06-21 8:41:51 LG Customer Information Center 1-888-542-2623 CANADA Register your product Online! www.lg.com SL4.DCANLLM_SIM_ENG_MFL71380137.indd 6 2021-06-21 8:41:51