Smart Toilet Seat Lifter BA07059
Usage and Maintenance Instructions
Product Overview
The Smart Toilet Seat Lifter is a bathroom mobility aid designed to assist users in opening and closing the toilet seat using their feet. It attaches to the existing toilet seat.
Parts Included
- Pedal x1
- Base x1
- Seat Bracket x1
- Nuts x2
- Bolts x2
- Arm Case x1
- Arm Extension x1
- Long Screws x2
- Short Screws x4
- Non-slip Pads x6
- Connectors x2
Assembly Instructions
Connect the Arms
Feed the two connectors through the eyes of the arm case and the arm extension. Connect the arm extension to the seat bracket and the arm case to the pedal.
Fasten the Arm
Secure the plastic arm extension to the arm case using the provided nuts and bolts.
Install Non-slip Pads
Optional: Apply the non-slip pads to the bottom of the pedal and the bottom of the base for added stability.
Connect Pedal and Base
Align the pedal with the base joint and press firmly to snap it into place.
Attach to Toilet Seat
Mount the seat bracket to the toilet seat, approximately 5 inches from the back, using the four short screws. Pilot holes can be drilled using a 1/8th inch drill bit if desired.
Usage
Your Smart Toilet Seat Lifter is now ready for use. Position it next to your toilet and adjust the arm to the appropriate height for comfortable operation.
