mailto:support.senseor@wika.com
Switchgear temperature and partial discharge monitoring solution – SENSeOR
Switchgear temperature and partial discharge monitoring solution – SENSeOR
User Manual for SENSeOR models including: UM00401 24 7 Asset Monitoring Solution Energy, UM00401, 24 7 Asset Monitoring Solution Energy, Monitoring Solution Energy, Solution Energy
File Info : application/pdf, 16 Pages, 1.05MB
DocumentDocumentDocument revision: UM00401EN-AA Date: 2023-01 24/7 ASSET MONITORING SOLUTION ENERGY DATAMATRIX TO XML USER MANUAL SENSeOR (head office) Bâtiment Natura 2 1198, avenue du Docteur Maurice Donat 06250 Mougins France Contact address: support.senseor@wika.com Regional distributors Visit www.senseor.com for the latest distribution locations. MONITORING SOLUTION ENERGY WARRANTY These products are warranted to be free from functional defects in material and in workmanship at the time of the manufacturing and to conform at that time to the specifications set forth in the relevant instruction manuals or in the data sheets, for such products for a period of one year. Reference SENSeOR terms and conditions provided at time of purchase for complete warranty details. SENSeOR (head office) Bâtiment Natura 2 1198, avenue du Docteur Maurice Donat 06250 Mougins France SENSeOR reserves the right to make technical changes or to modify the content of this document without prior notice. SENSeOR is not responsible for errors or for possible lack of information in this document. All rights reserved. No part of this document may be reproduced, distributed, or transmitted in any form or by any means, including photocopying, recording, or other electronic or mechanical methods, without the prior written permission of SENSeOR, except in the case of brief quotations embodied in critical reviews and certain other non-commercial uses permitted by copyright law. Copyright © 2023, SENSeOR SENSeOR Datamatrix to XML User Manual 1/15 www.senseor.com MONITORING SOLUTION ENERGY SAFETY INFORMATION IT IS IMPORTANT TO READ THIS MANUAL BEFORE INSTALLING OR COMMISSIONING SENSEOR CRITICAL ASSET MONITORING SYSTEMS. DANGER DANGER INDICATES AN IMMINENTLY HAZARDOUS SITUATION, WHICH, IF NOT AVOIDED, WILL RESULT IN DEATH OR SERIOUS INJURY. FAILURE TO FOLLOW THE INSTRUCTIONS GIVEN WILL RESULT IN DEATH OR SERIOUS INJURY. WARNING WARNING INDICATES A POTENTIALLY HAZARDOUS SITUATION, WHICH, IF NOT AVOIDED, COULD RESULT IN DEATH OR SERIOUS INJURY. FAILURE TO FOLLOW THE GIVEN INSTRUCTIONS CAN RESULT IN DEATH OR IN SERIOUS INJURY. CAUTION CAUTION INDICATES A POTENTIALLY HAZARDOUS SITUATION, WHICH, IF NOT AVOIDED, MAY RESULT IN MINOR OR MODERATE INJURY. FAILURE TO FOLLOW THESE INSTRUCTIONS CAN RESULT IN PERSONAL INJURY. NOTICE NOTICE PROVIDES GUIDANCE ON DAMAGE UNRELATED TO PERSONAL INJURY, SUCH AS THOSE THAT CAN CAUSE DETERIORATED PROPERTY. FAILURE TO FOLLOW THESE INSTRUCTIONS CAN RESULT IN PROPERTY DAMAGE. IMPORTANT IMPORTANT INDICATES ADDITIONAL INFORMATION ABOUT MAKING EFFECTIVE USE OF THIS PRODUCT. SENSeOR Datamatrix to XML User Manual 2/15 www.senseor.com MONITORING SOLUTION ENERGY TABLE OF CONTENTS WARRANTY ...............................................................................................................................................1 SAFETY INFORMATION .............................................................................................................................2 TABLE OF CONTENTS ................................................................................................................................3 OVERVIEW ................................................................................................................................................4 SOFTWARE INSTALLATION .......................................................................................................................4 1.1 OPERATING SYSTEM ................................................................................................................ 4 1.2 SOFTWARE INSTALLATION ...................................................................................................... 4 1.2.1 `SENSEOR' CERTIFICATE INSTALLATION .............................................................................. 5 1.2.2 APPLICATION INSTALLATION ............................................................................................... 8 APPLICATION LAUNCH..............................................................................................................................9 1.3 SOFTWARE STARTUP ............................................................................................................... 9 SENSOR XML FILES GENERATION ...........................................................................................................10 1.4 GENERATING XML FILES FROM AN INPUT TEXT FILE ............................................................ 10 1.4.1 CREATING THE INPUT TEXT FILE ........................................................................................ 10 1.4.2 IMPORT OF THE CREATED TEXT FILE ................................................................................. 11 1.5 GENERATING XML FILES FROM LIVE DATA............................................................................ 12 TROUBLESHOOTING ...............................................................................................................................14 1.6 UNABLE TO INSTALL APPLICATION........................................................................................ 14 1.7 UNABLE TO SET THE `OUTPUT DIRECTORY' .......................................................................... 14 SENSeOR Datamatrix to XML User Manual 3/15 www.senseor.com MONITORING SOLUTION ENERGY OVERVIEW This user manual describes how to use the SENSeOR Datamatrix to XML to generate XML files from the Datamatrix located of the top of the TSA-EV11 temperature sensors. This manual provides user guidelines for version 1.0.0. The XML files generated by the application will then be used for the 'SENSeOR Configuration Tool' applications. SOFTWARE INSTALLATION 1.1 OPERATING SYSTEM The SENSeOR Datamatrix to XML operates only on Microsoft Windows operating system, with at least Windows 10. 1.2 SOFTWARE INSTALLATION To install SENSeOR Datamatrix to XML, extract the `Datamatrix to XML vX.X.X.zip' zipped files. It contains two files: `SENSeOR.cer' and `Datamatrix to XML vX.X.X.appxbundle'. NOTE THE LAST REVISION OF THE SOFTWARE IS AVAILABLE ON THE SENSEOR WEBSITE. SENSeOR Datamatrix to XML User Manual 4/15 www.senseor.com MONITORING SOLUTION ENERGY 1.2.1 `SENSEOR' CERTIFICATE INSTALLATION Right click on the `SENSeOR.cer' file and select `Install Certificate' menu. Click on the `Open' button to allow the `Security Warning'. The `Certificate Import Wizard' opens. Select `Local Machine' as Store Location and click on `Next' button. SENSeOR Datamatrix to XML User Manual 5/15 www.senseor.com MONITORING SOLUTION ENERGY SENSeOR Datamatrix to XML User Manual 6/15 www.senseor.com MONITORING SOLUTION ENERGY Validate `Administrator mode approval' window and select `Place all certificates in the following store'. Click on `Browse' button, select `Trusted Root Certification Authorities' and click on `OK' button. Click on `Next' button and then `Finish' button to import certificate. Click on `OK' to confirm the `SENSeOR certificate' installation. NOTE ADMINISTRATOR RIGHTS ARE REQUIRED TO INSTALL APPLICATION. SENSeOR Datamatrix to XML User Manual 7/15 www.senseor.com MONITORING SOLUTION ENERGY 1.2.2 APPLICATION INSTALLATION Double click on `Datamatrix to XML vX.X.X.appxbundle' file to launch `App installer'. Click on `Install' button to start installation. NOTE AT EACH LAUNCH, THE APPLICATION WILL AUTOMATICALLY CHECK FOR UPDATES. SENSeOR Datamatrix to XML User Manual 8/15 www.senseor.com MONITORING SOLUTION ENERGY APPLICATION LAUNCH The SENSeOR Datamatrix to XML installation creates a shortcut with the same name in the Windows menu. Click on it to launch the program. 1.3 SOFTWARE STARTUP At start-up, the application sets the default `Output directory' path to `Current user\Documents\SENSeOR\Sensor data'. As its name suggests, this directory will host all the sensor XML files created. To select another output directory, click on the 'Browse' button. SENSeOR Datamatrix to XML User Manual 9/15 www.senseor.com MONITORING SOLUTION ENERGY SENSOR XML FILES GENERATION 1.4 GENERATING XML FILES FROM AN INPUT TEXT FILE 1.4.1 CREATING THE INPUT TEXT FILE To automatically generate several XML files, simply import a text file containing the data to be converted. To create this input file, you can use the Windows 'Notepad' application (or any other text editor) and save it as a text file. Its name, encoding format and saving directory do not matter. Each line of the file represents a sensor. To add new data to it, you can use free mobile apps such as 'CortexScan' or `QRbot' (available from `App Store' and `Google Play'), scan the sensor's radome Datamatrix (of the top of sensor) and paste string data. Here is an example of a text file created called `Sensors' and containing 20 sensors. NOTE THERE IS NO LIMITATION ON THE NUMBER OF SENSORS TO CONVERT. SENSeOR Datamatrix to XML User Manual www.senseor.com 10/15 MONITORING SOLUTION ENERGY 1.4.2 IMPORT OF THE CREATED TEXT FILE Click on the `Open file' button and browse the created text file. Click on `Open'. The application will load the content of the file into the 'Data to convert' text box and the text file path in the `Input file path' text box. Once data conversion is done, a message indicates how many XML files have been generated. By clicking on the 'OK' button, the application is ready to start a new conversion. By clicking on the `Open output directory' button, the previous `Data to convert' content is cleared and the application launches Windows explorer to view created files. SENSeOR Datamatrix to XML User Manual www.senseor.com 11/15 MONITORING SOLUTION ENERGY 1.5 GENERATING XML FILES FROM LIVE DATA The other way to generate the sensor XML files is to directly paste the radome Datamatrix (located of the top of the sensor) data into the 'Data to convert' text box. To do this, you can use a Datamatrix-compatible USB scanner like this one. To add new data, click on the `Data to convert' text box and scan as many Datamatrix as needed. Line wrap is automatic after each scan. When all the sensors are scanned, click on the 'Convert' button to start conversion. SENSeOR Datamatrix to XML User Manual www.senseor.com 12/15 MONITORING SOLUTION ENERGY Once data conversion is done, a message indicates how many XML files have been generated. By clicking on the 'OK' button, the application is ready to start a new conversion. By clicking on the `Open output directory' button, the previous `Data to convert' content is cleared and the application launches Windows explorer to view created files. SENSeOR Datamatrix to XML User Manual www.senseor.com 13/15 MONITORING SOLUTION ENERGY TROUBLESHOOTING 1.6 UNABLE TO INSTALL APPLICATION If the following window appears, it means that the `SENSeOR certificate' is not correctly installed. To fix it, please refer to chapter 'SENSeOR' certificate installation and try again to install 'Datamatrix to XML'. 1.7 UNABLE TO SET THE `OUTPUT DIRECTORY' At application startup, if the following window appears, it means that the `Documents library access' is disabled. SENSeOR Datamatrix to XML User Manual www.senseor.com 14/15 MONITORING SOLUTION ENERGY To fix it, enable `Documents library access' from `Privacy and security' Windows settings. SENSeOR Datamatrix to XML User Manual www.senseor.com 15/15