Get Started With Your Socket Mobile Barcode Reader

1. Initial Setup: Fully Charge Your Barcode Reader

For best results, please follow these instructions:

Use a wall charger to charge the batteries until the battery light turns solid green. This may take up to 8 hours.

Charging Requirements: Minimum 5.0 VDC, 1 AMP; Maximum 5.5 VDC, 3 AMPS.

Important: Do not charge Socket Mobile data readers in temperatures above 100°F/40°C, as the reader may not charge properly.

Note: Charging from a computer or laptop USB port may not provide enough power and could cause charging, connection, or scanning performance issues.

Visual Description of Charging Setup: A diagram shows the barcode reader with labeled buttons: 'Scan button' and 'Power button'. A charging cable connects the reader to a wall adapter. A clock indicates '8 Hours' and a green light symbol signifies 'Fully charged'. The text indicates that preinstalled rechargeable batteries are included.

2. Download the Socket Mobile Companion App

To set up your barcode reader, download the Socket Mobile Companion app.

Available for:

• App Store
• Google Play
• Microsoft

Scan the QR code with your device to visit the Companion app download page, or go to: https://sckt.tech/companion

3. Register Your Barcode Reader

Register your barcode reader with the Socket Mobile Companion app to activate a 90-day warranty extension.

Alternative Pairing: Direct Connection

If the Companion app cannot be installed, pair your barcode reader directly to the host device:

1. On the host device, turn off Bluetooth.
2. Power on the barcode reader.
3. Select and scan a Bluetooth connection mode barcode (refer to the next section).
4. On the host device, turn Bluetooth back on and pair the barcode reader.

Your reader is now ready for scanning!

Bluetooth Connection Modes

Factory Reset

Revert all settings to factory defaults. The barcode reader will power off after scanning this barcode.

[Barcode representation]

Warranty and Support

SocketCare Extended Warranty: Purchase SocketCare within 60 days of your barcode reader's purchase date to extend coverage.

• Product Warranty: 1 year from purchase date.
• Consumables (batteries, cables): 90-day limited warranty.
• Extend standard 1-year warranty up to five years.
• Additional services: Warranty period extension, Express Replacement Service, One-Time Accidental Coverage, Premium Service.

For more warranty information: https://sckt.tech/socketcare

Complete User Guide: https://sckt.tech/downloads

Need Help?

• Visit: https://sckt.tech/support
• Device Set-up: https://sckt.tech/device-set-up

Safety, Compliance, and Environment

Safety and Handling: See Safety and Handling in the User Guide: https://sckt.tech/downloads

Regulatory Compliance: Information, certifications, and compliance marks are available at: https://sckt.tech/compliance_info

IC and FCC Compliance Statement: This device complies with Industry Canada license-exempt RSS standard(s) and Part 15 of the FCC rules. Operation is subject to two conditions: (1) this device may cause interference, and (2) this device must accept any interference, including interference that may cause undesired operations.

EU Compliance Statement: This wireless device complies with essential requirements and other relevant provisions. Products sold in the EU carry the CE Mark. It conforms to applicable Directives and European Normes (EN), including:

• Low Voltage Directive: 2014/35/EU
• RED Directive: 2014/53/EU
• EMC Directive: 2014/30/EU
• RoHS Directive: 2015/863
• WEEE Directive: 2012/19/EC

Battery and Power Supply: The rechargeable battery may pose a risk of fire or chemical burn if mistreated. Do not charge or use the unit in temperatures exceeding 60°C (140°F).

Environment: Socket Mobile is committed to combating global climate change through sensible, sustainable policies. Learn more: https://sckt.tech/recycling

Compliance Logos

The document displays various compliance and certification logos, including:

• FC (Federal Communications Commission)
• UK CA
• CE (Conformité Européenne)
• TÜV Rheinland
• CSA (Canadian Standards Association)
• Bluetooth SIG
• WEEE (Waste Electrical and Electronic Equipment)
• RoHS (Restriction of Hazardous Substances)